I changed the speaker on mine for an alnico Jensen Blackbird 40, its suits perfect for this brownie. The custom Eminence is a little too much (101 dB) for me and weighs a ton!
I'm glad I found your video here. It's so instructional. Please my bass has for POTS and I need to wire them. Which configuration can I use. 1. One volume, one low, one mid and one high for the tones 2. Two volumes and two tone controls one for each volume I am using a500k for tone and b500 for volume and 47 for capacitor
I don't know anything about my Squier Jazz bass insides. I do want to upgrade the pots, jack and pickups. I was able to follow along the first part except I didn't understand soldering directly to the back of the pots, but I think I could do it. I was unclear on the bare wire you added, too. I was hoping for guidance when it came to the pickups, but you lost me! I saw 6 wires and wasn't sure what happen to them, which are "hot" or "leads" and which are not, and what to do. I actually ordered an Obsidian control harness plate with CTS pots and Switchcraft jack and quick connects, but I think I could do the soldering. My concern is now I will have 6 pickup wires and no clue which is which! Also how do I ground, and do I need to shield? I also need to get the pickups.......thanks for some guidance, though. I am curious how much you charge to do the harness and install new pickups though?
Thanks so much for this Zach / Strings Attached. I managed to rewire my own J bass copy with this guide, hugely helpful and I really appreciate it (although going to take me many attempts to make the wiring as neat as yours!)
Enjoyed your video. I am going to attempt what you did. What kind of wire did you use for the hot leads and the grounds. Tried putting a pre wired Mojotone into my Squire vintage modified Jag bass SS I did not work so I like what you did. And yes the stock wiring is a rats nest.
Where is your flux, my dude?! Also sweet jesus i come from the nerf modding hobby and some of your wire choices make me nauseous lol. Why not just mark all of the connextions on the ground wire circuit on an uncut line of wire, stip them at the marks, then solder at the exposed points?
I have this pedal. It’s amazing. I’ve just picked up the mini too to make more space on my board. I don’t use the vibrato side and the switch and extra size isn’t needed
Hi, I have a J n D short scale jazz bass and wish to replace the pots and re wire it possibly with a jazz bass replacement wiring kit. Any thoughts as to type of posts and Cap? If anyone can suggest i would be grateful for advise, Thanks