Did u put copper paste on injectors?

včom bola zavada ? ved ste tam nič nevymenili ?

Your accent 😢

How did you clean all the holes if you used a cutter what size

Use new bolts as they are stretch bolts..big risk for snapping them off at that NM. i did not use new on one i changed, did not snap . lucky i guess

That model is ok mine has difficulty starting when the tank is less that 50% full black smoke occasionaly and loss of power?

Which country is your garage

Thanks for the video. With the Stage 2 tuning, doesn't it have the "swirl flap delete" option? Does this just leave them in the open position and not require physical removal? Wondering if the effort is worthwhile to physically remove them.

Hi do know what that is called next to the injectors crank breather or something thanks

Hi mine is smoking from the injector area what can problem be

Hi i have same car but my injector is not leaking fuel but it is smoking from the injector area what can the problem be thanks

What is the name of this engine

Part 2 ?

Trying to do this on my diesel bmw and the 3rd injector was so built up with carbon I can’t get the copper washer out and I’ve tried everything

It does look so easy how you done them man.I just been quoted £2400 to replace all four of the injectors on my c class cdi 220 2010 ??

I have micro-leaks around 1, 3 and 4. Do I do it myself or let mercedes handle it? I need 150 in tools that I don't have. Mercedes wants 580 for all four (plus eventualities) and it comes with 2 year guarantee. Their last 11 years of work has been top notch. They will also have pieces (eventualities) that I will not have if needed. I don't worry about unnecessary work. Its not their style. My love of mechanics says do it myself but the ease and security says that Mercedes is best route. Its a 4.9 star garage. 2023 is the year of revision of all worn parts.

the "bracket" on the needle has a tiny bevel only on one side. the beveled edge goes away from the spring. you put it backwards. Just an FYI for next time.

Hi IS it always hard to get the injectors out my engine is om 642 and mine start leakin to on cylindre 123456 so they are leakin always i drove 70.000 km with it i didnt got issues, so is this really important to fix ???

The injector removal tool is brilliant. What are you screwing it onto? What's the thread? Thanks for the vid

433k impressive

Did you ecu code the injector after ?

Great video and i like your injector puller... great idea

It is OM646?

hi i changed the gasket but the water coming out of the rear bolt hole is malfunctioning how can i stop the water coming out

Hi. I have same one I have headche. Black smoke. To much after I replace injctor seal

Hei, is there any torque value when tightening the injector lines at 17:00? Or just by hand until you feel its enough?

How much on average does it cost to fix a small leak on a mercedes c220?

if you do this then you will never have injector problems? clogging causes the coil to get hot and get shorted, right?

Thanks for the Video. Is all the Injektors have 30 Nm I have Mercedes A170 cdi

Slow down & talk, totally no help whatsoever with this robot

Aferim adeš

Very good information, you should continue making more videos like these, they are very instructive and very well explained, greetings from the state of virginia usa.

Majstori … nema sta! 👍👍👍

Hi, what can be the problem if i change the screw and the tightening ring, but after 1000km it starts leaking again. what can i do to keep it really sealed?

Does it is better to use ultrasaund cleaner

So al you did was put new copper rings on it and new fuel lines?

How long did this take?

7nm+2×90°!!!!

I have the problem on a Mercedes B180 model w245 but I cannot remove the dirty because it is hard. I found it is called the black death. How to remove?

So before refitting manifold you don't need to use blanking plugs. You just fit the manifold back again?

8 holes in the injector nozzle

Hello ive a audi a6 2.7 diesel front wheel drive , europen version . Someone gifted me and i did all the filters and oil change , it has a check engine for air intake manifold + in computer there are some code for injector 2 3 5 , in highway for 130km it consume 8.6 lit , ive test it . But in the city for 20 km it consume 10 lit . Is this normal ? Does it has to do with intake manifold ? Many services here in albania told me dont do something to injectors becouse im gonna have more problems . What do you recommend me to do ?

Great video. Hope your work was helpfull ant the injectors work well.

What did you use on the injectors before putting them back?

How much NM?

Hey mate, can you please show how do I take out the plastic cover of the head so I could clean it?

Nice!!! Very informative. Thanks.

If you remoove swirls you need to install bigger sports filter :)

But what solution did you clean up with ?