Тёмный
DarthPistachio
DarthPistachio
DarthPistachio
Подписаться
Комментарии
@justvibe921
@justvibe921 2 месяца назад
I have same problem
@lazybagovich214
@lazybagovich214 Год назад
i cant belive it...from despreration, i typed in the search the problem and i was shocked that i found the same thing happening to someone
@grabir01
@grabir01 Год назад
Covering your motor with a shroud will not help with cooling.
@bryan2100
@bryan2100 2 года назад
Annoying! I have the same issue.
@gianfrancoburdisorrentino7604
@gianfrancoburdisorrentino7604 5 лет назад
I have the same problem after the client accidentally spilled the liquid container inside the mod, the logic is sulfate but I can not know how to disassemble completely the other red cable from behind and the black does not know how to remove them more easily, Does anyone have or know of any video that shows how to remove the black plastic base that is inside?
@maikelsg.5746
@maikelsg.5746 5 лет назад
have you repair? i have the same problem
@DarthPistachio
@DarthPistachio 5 лет назад
Couldn't be repaired - had to send back to retailer for a replacement
@maikelsg.5746
@maikelsg.5746 5 лет назад
@@DarthPistachio many thanks for you rapid respons.
@gianfrancoburdisorrentino7604
@gianfrancoburdisorrentino7604 5 лет назад
Tengo el mismo problema después de que el cliente accidentalmente derramó el contenedor de líquido dentro del mod, la lógica es el sulfato, pero no puedo saber cómo desmontar completamente el otro cable rojo por detrás y el negro no sabe cómo quitarlos más fácilmente. ¿Alguien tiene o sabe de algún video que muestre cómo quitar la base de plástico negro que está dentro?
@gonza9408
@gonza9408 5 лет назад
@@gianfrancoburdisorrentino7604 que tal Gianfranco ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VZQ-wmd0DGo.html aca tenes como desmontar el mod. Salus
@mauriziomicciche4130
@mauriziomicciche4130 6 лет назад
Very nice bike! Was everything painted with powder coating? I have a very similar project and I want to make sure all the golden parts have the same gold colour. Thanks in advance
@DarthPistachio
@DarthPistachio 6 лет назад
just standard 2 part part - must be heat resistant though..
@graemefisher8121
@graemefisher8121 7 лет назад
Did you find out what it was ?
@DarthPistachio
@DarthPistachio 7 лет назад
Graeme Fisher I did. It was rust and built up gunk and Ill prepared fitting of pads In the metal sliders. I replaced the holder brackets and removed the burrs on the new pads to ensure that I could slide the pads side to side with hand power. Then applied silicone grease. The general rule is if you can see the grease you've applied too much. 😉 Basically the holders were gripping the pads instead of letting them slide so the pad was slapping the disc every revolution of the wheel.
@TinoushGTR
@TinoushGTR 6 лет назад
So not a common problem. Want to buy x trail but I am scared to have many breaking problems as I read in forums and the bonnet is vibrating loose?
@DarthPistachio
@DarthPistachio 6 лет назад
Not a common problem at all - but a problem that can equally affect any vehicle really. Previous owner had installed cheap pads and they were not finished properly. I've changed my own pads for over 30 years now and I have never bought a set that I could just fit without having to take a steel file to and ensure that they fit properly and can slide in their holders. Most mechanics will just jam them in there and be done with it as it's not "their" problem then.. Sad but TRUE.
@confederatefan
@confederatefan 2 года назад
My 2017 x-trail sounds similar.
@Dane.Reynolds
@Dane.Reynolds 7 лет назад
What is the fairing called that starts from the air intake box to the radiator?
@alfiec76
@alfiec76 2 года назад
Like to know where I can purchase those too .nice addition
@myfavoritechicken
@myfavoritechicken 7 лет назад
Great set up! Thanks for sharing. The hens are so eager to start the day! We appreciate your business! www.chickenguardian.com
@b3l14l
@b3l14l 8 лет назад
Sounds better with baffles out.
@vidalexio8166
@vidalexio8166 8 лет назад
what gauges are you using? nice bandit :)
@DarthPistachio
@DarthPistachio 8 лет назад
The gauges are a KOSO RX-1N :)
@DarthPistachio
@DarthPistachio 9 лет назад
now available from shapeways: :) standard screen: shpws.me/CAY5 large screen: shpws.me/DPlT
@Metalhead-4life
@Metalhead-4life 9 лет назад
thanx!
@Metalhead-4life
@Metalhead-4life 9 лет назад
Where can I get one?
@DarthPistachio
@DarthPistachio 9 лет назад
now available from shapeways: :) standard screen: shpws.me/CAY5 large screen: shpws.me/DPlT
@nakitaw8806
@nakitaw8806 9 лет назад
Any links and price's in EU.
@DarthPistachio
@DarthPistachio 9 лет назад
see my latest post today :)
@dohnjamesbryanmagnaye89
@dohnjamesbryanmagnaye89 11 лет назад
nice suzuki bandit very sexy look
@DarthPistachio
@DarthPistachio 11 лет назад
The headlight is a K4 unit from a Suzuki GSXR1000 and the bikini fairing for it was from a company in France who no longer make them now..
@jamiesmith3937
@jamiesmith3937 11 лет назад
Where did you get that headlight from
@dcmandeville
@dcmandeville 12 лет назад
I like your taste in music! And you definitely have some punch drumming skills. Keep posting your progress. And keep the good beats going. :-)
@ventanakaz
@ventanakaz 12 лет назад
hey darth it's the video that's 8:28 long i think johnnypal only has three speedbag videos on his youtube channel so if you find the one that's 8:28 long then thats the one he's talking about...ralph
@DarthPistachio
@DarthPistachio 12 лет назад
Couldn't find your attachment - looke don your channel and couldn't see a video that applied - update please Johnny - cheers :)
@ventanakaz
@ventanakaz 12 лет назад
that's a nice setup darth. looks and sounds good...ralph