Super casque mais hélas les mousses sont bien trop fragile et deviennent inutilisable. Le plastique se décolle et laisse la mousse interne sortir. Great helmet but unfortunately the foams are far too fragile and become unusable. The plastic peels off and lets the interior foam come out.
i just got mine, does the ptt cable disconnect from the headset? I dont wanna force it if not but i would like to take it off if i can, as i have no use for the comms at the moment. (I already know the mic boom can be removed.)
I'm wondering the same thing, these new m32's have a different cilp that holds the headset to the headband and every single m16c adapters I find are not compatible with these. Idk if I should retunr them and get the older versions that work on the m16c adapters or wait and hope that they make them for this version.
Привіт, підскажіть, чи є якийсь адаптер для навушників Earmor mod 3 (такі як на відео) під шолом з закритими вухами (модель шолому незнаю, купляю не для себе)? Зі стандартними адаптерами просто не заходить під шолом) P. s. Варіант зі звичаним ремінем на голову не підходить!
Mine fell off every time I tried to flip the M32's up. It turned out to be because the rails I was using on my helm were cheap ones from aliexpress. I re-installed my original rails and now they work great. Hopefully this can help anyone thats running into the same problem.
My M32 died after I used it lightly about 15 times on the shooting range with a radio. First the microphone died and I bought a new mic. Then I lost radio comms. Active hearing protection still works. I bought a new PTT and took apart the headset to check all wires and connections. I saw no visual problems. But this POS headset is now in the trash.
I was straggling to get these together as well but i figured out if you press them so that most of your force is pushing the ear adapters "up" towards the long side of the wedge, before you start trying to slide them in, it helps a lot
Estoy viendo el cambio de diadema a casco mediante raíles y veo qué esto no ocurre en ningún casco táctico profesional del mercado para uso militar. Tener que desmontar las almohadillas para hacer la sustitución es un error ya que el proceso entre diadema y montura de casco es muy lento y delicado, si un soldado debe hacer un cambio de montura de casco a diadema o viceversa este procedimiento es inadecuado. Si su hermano pequeño el earmore m32 para el mundo civil lleva las conexiones de la diadema o monturas mediante de pasadores a presión ¿ Por qué su hermano mayor el Milpro debe hacerse de la manera del vídeo? No comprendo el propósito de esa diferencia. Si creamos que el propósito es hacer más segura la conexión de los auriculares a los diferentes soportes por qué el sistema de presión corre más riesgos de rotura de las patillas, entonces yo me hago la pregunta ¿:Por qué no utilizan algún sistema alternativo de otras firmas conocidas ? El sistema de sujeción de Peltor que va a presión lateral está funcionando muy bien y permite un cambio de soportes de los auriculares más dinámico y seguros. Otro aspecto que ve en estos auriculares es su conexión de cable a los cascos, no tienen en cuenta que los artículos pueden ir bajó casco o con soporte mediante rieles y que ésto es un obstáculo para la conexión superior del caco y ésto hará con un uso reiterado que la conexión pueda deteriorarse y romperse, la conexión del cable a los cascos deben ir por la parte inferior dónde no tenga ningún roce con el casco al ajustar los auriculares a la cabeza el cable roza y como digo es cuestión de tiempo que esa fricción acaba rompiendo la unión de cable al auricular. Earmore debería tomarse estas valoraciones en serio ya que se que algunos ejércitos utilizan éstos auriculares la versión militar y la civil en algunas unidades y también en unidades militares, países que no quieren o no necesitan hacer un gran desembolso por qué las acciones y las actividades que van a desarrollar no requiere de por ejemplo Peltor Cmntac 3 o 4 , pero se necesitan mejor en éstos detalles.
I just installed the headset in my flux helmet. The process was very easy, as shown in the video here. The adapter and the rail fit perfectly fine and tight. No need for hammering or oil to get them to fit as in the other comments.
I have a mod4 m32 and I am trying to take the mic off to switch sides but I feel like I'm going to break the mount if I do it his way, any suggestions, or is that correct?
J’ai un problème j’ai acheter le m32h et aucun moyen de le fixer
2 года назад
I bought a pair, connection to radio broke after 2 weeks us using. The cable with the NATO connector breaks right at the edge of the muff´s shell. All four weins, clean cut. 3 of my friends reported the connector failed for them after short time too, and there is a video on youtube stating that this is a commom problem with thees muffs. Earmor should considder better cable protection there.
Do NOT do the first step (removing the attachement between the headstrap and the phone unit by popping it) with the M32 MILPRO mark3 it will BREAK the fixation because they are not removable on this model (i don't know for other models) PS : Yes i broke one of mine, but it's all plastic so with a super glue it will be fixed and invisible
There needs to be an mlok ready model, or a slimmed down mlok adapter because the ride height is a real fucking problem for foliage and head clearance. Not to mention it makes user look like fucking idiots with dunce caps. Stop trying to cut corners. If earmor is pro 2a then give us usable products.
@@jwairsoft6911 i just gently tapped it into place with a screwdriver handle lol its built pretty good enough for me.. At least i know its a tight fit and wont move around..
You didn't address how fragile the plastic pins holding the headset in place are, first time detaching them very gently to mount on my helmet and they broke, making 100$+ headset useless. Flawed design...