I've been wanting to find some abandoned or thrown away watercraft for some time now 😊 If you still have water in there, how about sticking some dryer duct in there and blasting a blower fan through the hull for a few days?
This makes a ton of sense, especially around mechanical equipment, such as an hvac, water heater, etc to reduce the visual clutter while still preserving easy access for maintenance.
I've got to give you credit for your creativity. Your abode is colorful, simplistic, and functional. It's your man cave and it seems to be working just fine for you. Good job for doing the best you can with what you have.
Im about to do this in our 5th wheel home, the cold wants to pour through the windows, especially at night and I need to keep little ones warm. If you ever want a wider selection of patterns for decoration purposes, consider fleece from Joanns. Throughout the winter you can get it for $4/yard on sale and theres hundreds of patterns and colors to choose from, I think its similar in thickness to a throw blanket as well.
Just a bit of advice from a viewers perspective, it might do you a lot better during your explanations and when building and there's lots of noises from machines and such, to get a wireless mic that is compatible with whatever you're using to record your videos. In the beginning of your video due to just the bit of wind we couldn't hear a word you were saying and then you went into beginning the build and between the machine noise and the wind you really couldn't hear a word you said. I'm a fellow crafty DIY'er so I look forward to watching your future videos and I wish you nothing but success with just starting your channel. Also it would do your channel some good attention if you make a short intro to add to the beginning of all your videos, maybe even a list of supplies one would need to build what you're building, what you're making the table of the previously recycled materials kind of like give a little backstory like this piece of metal/whatever was previously a work bench but the legs rusted off with age so I am using the remaining table top to make a couple of mini metal coffee/end tables, and then for those that have welders you can inform them of what kind of rolls of wire you used, type of welds you used, and finally after using the finished build maybe give tips for what you would do differently to improve your build.
I'm going to look for a wireless mic on eBay. Right now period thank you for all the help. Thank you for all the help. And I'll have to work on an intro. I normally just use my Phone And don't edit anythen I'm gonna have to start editing my videos. Aint come up with an Intro, this will be interesting. Thanks Thanks
I googled the manual for this planer. The tool you didn't know what it was...it a magnet. There should be 2. They are for removing and installing blades so you don't cut yourself. Remove the screws holding down the blade then use the magnets to lift the blade out safely.
I don't see a problem with that method other than maybe the steel hooks could cause wear on the fiberglass of the limbs. It's unfortunate that the Horton company went out of business a few years ago. They made nice, cheap, American made crossbows.
Thank you for the information. I had no idea who made it. The hooks were wrapped with plastic. So it didn't scratch up the lamb it's only 150 lb. Hope you have a good day thank you for commenting
Great mod for this crane. I was about ready to go with a basic hoist, that could barely handle the 300lb I need it too, but I think this will work much better.
To be honest. On the red four-wheeler. I put the 212 predator. With an eBay 30 clutch kit. But I had started with a centrifugal clutch. And a big sprocket on the back. For what I paid for that. I could have just bought the 30 clutch kit off of eBay. And ran the factory rear sprocket and probably saved money just the tip
I weigh 265 pounds. I believe for me it was about hey hey72 sprocket. Centrifical clutch was a 10 tooth sprocket. The lighter person riding it the less you need in the rare
Very nice set up my friend! You should record the transformation would of love to watch it. If you need any tips or information about free editing and thumbnail apps I would be glad to help! Great video love the tour! Have a great rest of your day! God bless!🙏❤
Yeah I should have videoed actually cleaning up some of it. But I got most of it done now. I don't think I've ever edited anything. It's just all raw footage
something I commented onI might have a cxouple of suggestions that will improve your setup. My brother and his friend made a headgasket with four sets of platinum points equally mounted around the cylinder. It was layered in between the gasket material like a circuit board. So instead of firing from the spark plug it fired from each set of points. The platinum points had no place to hold any carbon build up so would not foul out like a spark plug. and firing the gas mixture with four sets of spark burned the fuel vapor quicker and more completely.(old airplanes had two sparkplugs per cylinder) Giving an increase of power with less fuel consumtion and less emissions. My idea to add to this is to reduce fuel droplet size thus increasing surface area of the fuel by using an ultrasonic mister which instantly vaporizes a drop of liquid to a finer mist than a carburator is capable of. This should also increase power while decreasing consumption andEmmisions. The reason you do not see this gasket method of spark on the market now is a sparkplug company bought their patent. Their was a drawback to the design they had not worked out at the time and that was that the gasket was thicker and you had to torque it down just right or it would blow the gasket. But this was 40 years ago and we have much better materials to work with now. I really hope you read this or anyone else . It could be an easy add on for cars well worth the cost for the increased economy and decrease of emmisions. Hopefully give a little more time for the transition to the totally electric cars that are coming. Jake The Snake Was interested in the gasket for his race cars as it would have been a huge advantage. So if you need an investor you might want to try him. It also goes to show how money trumps humanityand that big corporations (Firestone) are more concerned with the bottom line than reducing polution to save mankind. We really need to institute a crimes against humanity law for people like that and Big Pharma who suppress or overprice discoveries that benefit life.. Please send a comment should you read this. I like to think I am at least trying yo help.
