I'd consider it if I didn't have the backhoe on it. I've already clipped my truck mirror with one of them when plowing snow. Got a bit too close and forgot these lights stick out.
Had my d105 for a a few months, bought second hand, and at first the accelerator pedal operated as it should, but with today max engine speed, idle wouldn’t move mower forward like usual and a full depress of the pedal yielded 1-2 mph only. I found the belt rubbing the spring as it was routed incorrectly making contact with it. I’m hoping that replacing this spring and the belt will fix my issue. Thanks for the video.
Really? All you have to do is reach your arm up in there and take the rear tensioner. Next to the rear top pulley out, then slide the belt out, slide the new belt in, put it back in. I did it myself without taking the transmission out and it took me about forty five minutes.They use a cy
Nice job. Thanks. My fuel solenoid went bad. I removed it and cut the top of the rod. Put it back and installed a manual inline fuel shutoff . Starts and runs good. Idles low and smooth like never before.
33.8 fluid ounces in a liter 32 fluid ounces in a quart. So over 12-13 it’s a difference of 21.3 fluid ounces. So if it’s 13 quarts it’s actually 12.3 liters.
Awesome! Thank you, my new (admittedly very cheap) carburettor from my mate 'Ali'... delivererd 'Express' now runs like a dream. Interestingly, the Chinese made knock offs don't bother with the plug you had to drill out
I am at 78 hours on my S120, can you recommend when the valves should be checked, yearly? or number of hours, thanks. Just found your channel and now I am a subscriber
If the motor runs great don’t worry about it. When your motor starts to ack funny. Watch this video: m.ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ESUBgJHnblk.html
Hello , can it be that turn signal does not work with engine off? I am in assembly stage , not yet started engine . I thought turn signals should work from battery , but it does not. I have new relay, and wiring seems ok . Can it be that I damaged relay because I connected green and black to relay instead of grey and black. I am lost..
If you have a good a battery the signals light will blink. If you have a bad relay the light should light up but won’t blink. Make sure you a good ground.
Now here's a guy that knows what he's doing, great video fixed my long term problem, Thanks for showing us viewers where the idle adjustment screw was hidden, replacement Walbro carburetors are $230 where I live.
Hopefully someone can help me, i have a john deere e130 which lost power while cutting the grass. When you engage the blades, the engine, instead of a higher output, the engine drops down lower and very little wind coming out of the chute. Even when starting it up, the engine drops down, seems to have low to no power. 0:08
Most likely the tractor tire has hit too many trees houses or rocks over the years The easier trick would be to bend the axle shaft a quarter to 3/8 of an inch with a 10 foot cheater bar to give you back the alignment and slight toe in Chances are the other side may have been the bent one ?
