After 24 hours, the evaporust looks the same as the cleaning vinegar i used on some super old and rusty sockets and wrenches…does look like they cleaned up better than mine…but then again mine are easily probably like 40 years old or more…
I had some just as bad i cleaned them but still am going to buy new ones and throw them in the trash the teeth had expanded and the sockets where very loose in the driver .
This stuff is a miracle! I’m not kidding. I have restored thousands of dollars worth of tools with ONE BUCKET! You can use it over and over again. I recommend using a rotary tool to get the yucky stuff off. Then rub them with some oil to ensure they don’t immediately reoxidize.
A tip for anyone that's interested... Regardless of the solution being used to attack the rust (I haven't tried Evaporust yet but I will after seeing this), if you agitate the soaking sockets you will get faster results. As an experiment, I attached my tupperware container to the top of an old fish tank air pump and the vibration for the pump was enough for my solution to "ripple" and the sockets to "jiggle, spin, and bounce" a little bit. The best part is that the pump is very quiet. Not ultrasonic, but pretty fast and quiet
Beautiful this was what I needed to see, I wanted to restore the shine look to the sockets while removing the rust and not eating at the metal itself. Greatly appreciate the time and work you placed into this video and sharing it.
@@oldmanwoking Just an update I did use your process and EvapoRust and forgot about my sockets for 6 to 7 weeks and was greatly impressed with the results. Took the sockets out of the EvapoRust and rinsed them in luke warm water and they came out brand new looking. Only the small sockets did I need to stick a small brush to complete the job. But otherwise this stuff is really good. Thanks again.
great stuff. best to degrease and clean the sockets as much as possible before using Evaporust so it will last longer. Bottle brush attached to a drill really helps get the insides of the sockets
I know there is something you can put on them afterwards, but just can't remember what it's called right now. It is suppose to help the the rust afterwards, but more than likely the rust will still come back after awhile....
you need to rinse with water, dry quickly and spray them with some sort of rust preventative like wd40. Per Evaporust's site items can continue rusting if the object is not flushed afterwards.
@@I_Died_2_Weeks_AgoI have USA craftsman that are junk almost all are rusted. Now granted mine were bought about 15 years ago not vintage by any means so id trade them in a heartbeat if I could
Please always wear gloves touching them. The evaporust is safe but not after those sockets have soaked a long time. If they soak long enough it will start to break down the chrome on a microscopic level. The chemical that are used in the chroming process are insanely toxic and cancer causing. Some of those chroming chemicals are so toxic they've been banned in several countries. Great video though
Check out this Lawn Mowing channel and don't forget to SMASH that SUBSCRIBE button and hit that 👍 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Or8G7xAEwkg.html
