Hi guys! This channel is mostly dedicated to the build process of whatever motorized toy I may have at the time, however you may find a mix of some product overviews of some toys I get along the way and some action from local cars meets as time goes on.
If you are interested in doing a collaboration or would like to send me any products to try out for my channel or for my cars, please email your inquiries to me and we can discuss.
Thanks. Someone else suggested that and I still have not gotten to it yet. I kind of lost interest on the car lately and considering moving to something else
Im guessing you figured it out by now. I would have tried sitting that mirror on the ground on the driver side then look at the reflection of the tire through the mirror. Easier said than done I guess and nice car.
Yea deff easier said than done. I have not figured out a great way to get it centered yet. I do think I need to move the front of the lift over a bit more as it’s not fully square from the wall front to back. I think once that is square, some of my problems will be resolved
Thanks much in the advice! Gotta get back to digging tonight for the expansion. I appreciate the view and feedback. I didn’t think anyone watched my pond videos. Lol
@Twobarpsi I’m sure it will overall, so I may need to hold off on using this. I still question the amount of water that comes out of this thing. Even when I run that pipe to a waterfall, it’s going to be insane flow
@Twobarpsi yea, that’s what I am worried about. I think once it’s flowing through a waterfall and over some rocks in som fashion it will be better, but this pipe is terrible looking and just too much. I think I could shut off my waterfall and aeration pump and just run this though
There is a built in brightness se sir. Again this is just a tablet at the end of the day. It does all the same stuff you phone does. So it dims at night and brightens during the day
I did drill the rivets, but realized later it was not needed. The bolts were what pulled the reg out. Don’t use nuts though that have a flange on them. They will come off track and jam up. Ball bearings are most advisable, it regular non flanged nuts can work in a pinch. Flanged nuts will work, but you will be redoing it at some point
@@Twobarpsi as much as I hate colder weather, I certainly enjoy spring and fall more than the extreme seasons. If I could afford to live in a place that was spring and fall weather all year long, I’d be there!
Great video sir. Is there an email or phone number where i can contact Andrew Coggins directly? I tried clicking on the link for the forum, but it said the site was down. Thank you sir. The bumper holes on my Rebel are also annoying me.
I have been doing my best to remediate these issues as time and funds allow. It’s a completely different car now. Next on my list is getting the bumper re-cleared to get more to my level of expectations
I am not sure if you are asking or telling? I have only encountered issues when the grass is too moist or wet. I have since changed my mowing schedule to the evenings instead of mornings to mitigate this.
I hope you don’t mind me bringing this up. I just picked up a 2008 Base Model (LS3) and installed a set of Long Tube Headers, X pipe, & an axle back. I deleted the cats, unplugged the rear 02 sensors, and turned off the CEL codes via HP tuners I’ve done maybe 8-10 pulls at WOT untuned. Been reading on the forums the engine is leaning out.. Shit got me STRESSING😂 This video gave me some hope I’m gonna be fine. Your honest thoughts?
Congrats on the purchase. My honest thoughts I thought were plenty clear in the video no? People on forums are mostly stupid and recycle stuff other people say with no direct experience.
All good my man. If you wanted to be super extra sure, you could just do a couple pulls with a wideband decently cheap, but I don’t think you are going to get any diff result than I did. All cars are tuned stupid rich to keep the cats from cooking
The check valve would not last in the water. It’s only purpose in my eyes is to no let water back into the pump. I am like 3 winters deep with this setup
@@zzman5306 I live in Pa. So yes we get bad winters at times. No it does not fully keep the ice open . Nor does my higher powered one that I keep in the koi pond. It certainly keeps the ice at a minimum in the harshest conditions in relation to the rest of the pond.
The heaters don’t fully keep them open either when things are extreme. My suggestion is that if you have a larger pond to NOT use this setup. I use the pondguy aerator in the bigger pond. I have recently added a second Aquascape aerator in this small pond as I was having some fish loss mid summer. Now that the goldfish are recreating at such a rapid pace, my logic was that there was not enough air
I just go by seat of pants. I have gapped MANY of Rams with my Ecoboost. 22’s themselves would not make a difference. The gearing would though, but I have 3.92’s
awesome video, late to the party but you clearly made a great choice on the buyout. I just sold my 2014 ram and I am currently about to purchase a 21 sport identical to this but burgundy and with a sunroof. unfortunately no power steps, but the price is right on it and has low miles. This video is very informative and i am looking forward to it!
I purchased a 2016 CC XT2 LX42 KH in May 2017 which is similar to CC in video, mow 2-acres. My mower deck & reverse mechanism never looks filthy like in video [air compressor & 4-minutes; Reverse works perfect]. XT2 currently has 325-hours (8th season) and has original spindles and mower deck wheels. I mow areas with bumps/dips and my PTO lever has never jumped out of position. I’ve never had any problem checking fuel level with the sight gauge that is viewable from the seat.
Thank you for coming in to confirm you have no encountered the items I pointed out. I never said these were issues or even common issue, just that it happens/happened to me.
Ughh I used it on my stocked vw cc did a whole flush cleaned Added new coolant Did a 1 week test without adding anything stayed normal Added the vr racing cool down honestly it truly work but didn’t give me the 20 degrees lower gave me about 16-17 Stayed between those the whole week and after that also forgot to mention I did do a engine clean 🧼 As well car does have 140k miles no issues It can definitely be a hit or miss all depends on how you do it
Did you watch the video? While I appreciate the feedback, this video was not showing its typical intended use. I filled a water to air intercooler with it.
Just so you know for next time instead of double bolting at the bottom of the tail lights when you take them off there are 3 screws that come off and the whole cover just pops right off nicely
Thank you for the heads up, however this video is like 8 yrs old and this car is long gone. This would be a great video idea for your channel though as an updated video.
I know is already 5 years but comparing invicta to sumo is like comparing Volkswagen to mercedes both have windshield, both have 4 wheels, both have front and back sit's , both have body and both have engine, but to be honest every this part is just better in mercedes than Volkswagen in same class and you pay much more for it. Sumo is better in every category and will become future great classic , invicta will land in garbage bag and nobody will miss it. Last years I bought for guys that work for me invicta watches , just to make them in to watches little, and to be honest I fill like last as hole for that, If I can turn time back I will buy them Seikos.
I agree whole heartedly. I have sold off all my Invictas I had. The sumo is just such a nice watch for the money! To be honest, I do not feel the same about my OG Monster or SKX009. They just feel/look cheap in comparison
@@PMPerformance many years ago maybe 17 when I bought my skx I saw sumo in seiko boutique, this watch was looking 5 levels better than skx ,but was kost 3 times more, now I have mm300, few mm200 diferent gens and maaaaany more seiko divers and sumo sit in box with most expensive ones, love this watch. Greethings !
@damnbrosky I do not wear this one anymore as I have a Sub and GMT master, but I still really appreciate this watch for the value. I remember hearing people enjoying their MM’s more than their Subs back when the MM’s were still being sold. Another fabulous watch for the money
@@PMPerformance I try consider to buy Rollex, sub to be precis but some how cant loose this filling like this watches are not for watch enthusiasts but for pimps, drug dealers , rap superstars and people buying them mostly to resell ar to lift visual status in eyes of other people who want to desperately lift own status. Also bussines model which Rolex has make me turn my head out from them. Ok I talking to much personal stuff, maybe one day I will change my mind if I find one on the street without waiting year in line being blackmail to buy other watches from dealer. Best wishes man!!!!
I just had a shop install mine I got from square automotive. But volume is stuck or won't go higher than what is at the moment. Did you have any issues? 2019 Q50 same as yours.
What you see in the video is what my experience was. My guess is you maybe have a stuck button either on your center console knob or steering wheel button? Or just was not installed right? I would reach out to Rob since he supplies support if you purchased from him.
Fronts are pretty much dead on, just a little bit more room to go. Each rear tire hangs off maybe 1/2-1” something like that. I swear I showed some back views a few times on one of these videos for reference since no one seems to mention this on their videos. This was a big hangup with me as well causing me to question my decision before finalizing the purchase .
I have a c6z06 and I am also looking at getting an atlas 4 post lift. Which model is this and how does your c6 grand sport fit tire width wise? are you overhanging on the edges? thanks
It’s a tight fit, but it works. My fronts have a smidge to spare, and my rears hang off maybe an half inch to an inch on each side. I am running the atlas pro 8k, so their basic model.
What do you mean specifically “Ford says you can’t?” There may be a hardware limitation on your device. IE: you got a parts bin unit from an early 2016 or 2015.
@trsskater the reason I ask is because I know the aftermarket cameras there is a camera orientation setting. So I would go under settings and see if there is something for the camera to adjust the orientation. If not, hit the camera button on the console if you have one and see if you can change in there. If none of those work, I would go under the car settings and make sure the approximate setting for LHD for your car is set maybe?
