I ripped the motor completely out, of my tello trying to remove the damn propellers because for some reason, it is getting stuck on there too hard and I know nothing about repairing these things so that really sucks. I brought it because it was therapeutic for me. I found it to be quite helpful with my stress and tonight the son of a bitch broke and I was already stressed out enough from the day before that so yay life also anyone have any advice as to why these propellers are not removing so easily
Świetne i bardzo pomocne wideo, które przekonało mnie do zakupu tejże kamery termowizyjnej. Jak myślisz, czy ta kamera sprawdzi się w gastronomii? Mam tu na myśli sprawdzanie stopnia nagrzania głównie garnków, patelni, powierzchni grilla elektrycznego itp.?
The temperature range is only 0-80C so use in cooking/gastronomy seems rather limited. What makes it harder: the colours are „auto-ranging“ so the colours might me the same for two meals although they are at different temperatures.
Hello, very good work and well explained, I have a question, do you know why it specifically needs to be 1.4 volts in the low stage? I know it's because of the resistive behavior of tin oxide on the surface of the sensor, as oxygen is an inert gas that interrupts the flow of electrons, but in the presence of CO its resistivity decreases. However, I don't know why it specifically needs to be 1.4 volts? What happens at 1.4 volts on the surface of the oxide?
Yes, I‘m totally sorry about that. Still many viewers have reported success fixing their irons. My second iron‘s oled appears to get little dim recently. When that needs to be replaced, I‘ll make sure to get better footage.
The original charger is 15.95V (Minix Brand) and apparently current limited to 50mA. No intelligent battery management system there… So it charges the battery nicely, but blows it to bits when left on for too long. If you have a link or more info on the best way to change the backup battery, please let me know. It keeps forgetting it‘s settings.
Y'all gotta ease off the treble in your audio. You gotta low voice but your s's and t's are ear piercing. Lowering the treble in your audio might make your voice easier to listen to. Just fyi.
I always use the iPhone‘s built in bottom microphone with the „Voice record pro“ app. Then very little post processing with audacity on the pc and finally upload it to auphonic, who do a great job smoothing out the audio. Then in Shotcut I mute the original audio (except for the parts where it is relevant) and add the processed audio as an extra track. It is a bit of work, but apparently it is worth it.
Oh yes, and: I hold the microphone very close to the mouth, a little under the lower lip, so I don‘t blow on the microphone and speak calmly. Basically that is how the Rammstein singer does it, creating a similar effect.
ich muss bei meiner Hansgrohe Armatur die Kartusche wechseln, sieht identisch aus mit der im Video. Leider ist die Chrom Abdeckkappe total fest, wahrscheinlich muss ich sie zerstören. Eine Frage, die mir auch Hansgrohe nicht beantwortet hat. Beim Einbau der neuen Kartusche muss ja die Metallmutter raus, aber auch genau an dieser weißen Kunststoffmutter wie im Video zu sehen ist, muss etwas gedreht werden beim Ein und Ausbau der Kartusche. Was hat es mit dieser weißen Innenmutter auf sich, was wird hier genau eingestellt und muss man die komplett runter drehen?
Hi, i think there's an easier way to this. Just cut the wires at different length (so you don't have the solder-joints right next to each other) somewhere in the middle of the legs, cut the new wires correspondingly and solder them there. No need to open up the bottomcover and risk damaging something on the mainboard. Regards
looking for an inexpensive and low power consumption little mini PC. Good that i looked at your video. i found that fujitsu cable available for 30,-EUR and up wich is insanne when you see that it is just a specialised version of a 08/15 standard sata and power connection. since i plan to also add a 2,5" sata ssd it just became more expensive just due to this stupid cable. sad ;(
That is indeed a poor design decision. Apart from that the machine served me well for many years. But it’s days are numbered as mine does not support windows 11. (Processor too old)
Thanks for the great video, my son was in tears when his Tello broke! Thanks to your video and tools specifications we just fixed it! Brilliant thanks from my happy son!
Getting compilation error like http.h missing.I am using esp-idf v4.3.I also saw my idf_path is set to my esp-idf 4.3 .How do I change that so it takes components from your given project directory because http folder is not there in my esp-idf.
hi, the problem with my drone is that I pulled the drone propellers and the motor went out and the wire broke. Can I solder the wire together? or does it not work
There is a Video on RU-vid: „how to repair mini coreless motor“. That might be worth a try if you’re on a tight budget. But I‘d rather go for an new motor.
Hi, I'm not sure if ur gonna reply but I'm a computer maintenance technician, as a professional do you think this camera is good for board repairs? I mean does it give you the necessary details about small capacitors like something a little precise that I can count on to find shorted caps? Thank you in advance!
It is nowhere near those high-res thermal cameras with visual overlay that you‘d want in a professional repair shop. For me, a hobbyist on a budget, it is good enough to locate hotspots on PCBs. So no: for the professional,speed and accuracy means money and this is not the tool of choice in that case. Apart from that, I still use it frequently after all those years. It is the only thermal imager I have, so it is the best one I can use when I need one.
All I want to know is how to change the from Celsius to Fahrenheit. I asked the vendor, and the vendor provided your video for my question... hmmm.... Do you know how to change the temperature designation?
Great video; I wish I could use it ; but I have been looking everywhere for the firmware version 60 or 61 but have been unable to find it anywhere. The links to the programming information and flash file are no longer valid on the jyetech site. I was hoping that you might still have a copy of the file you downloaded and that I might be able to get a copy of it from you. Thank you, Dennis Ostrowski
I put it in the freezer to make the glue brittle. Then wedged it open with a chisel. That caused some damage to the edges of course, but the plastic did not crack.
