Thanks David. Sounds great! I always enjoy your videos even if they are so long apart lol . I have been playing guitar on and off for over 50 years and I still admire anyone who can put a video together in a continuous take. 🎥😂🤣 👍Best wishes. 😊
INPUTS B/A: Here in the upper left corner of the jack panel you'll find two 1/4” insulated jacks. These are the inputs for pre-amps and/or effects, depending on how you wire your system. You may drive the 2:90 with your pre-amp directly or choose to come from the last effect in a chain and drive the power amp this way. Either way is fine and up to your preference. We have also provided an input sensitivity switch that toggles you between instrument level and the less sensitive line level position. If you have too much signal in your system by the time you get to the 2:90, use Line Level. This tends to be the more common position. If your Pre-amp doesn't have enough send level or you want to plug a guitar straight into the 2:90 use Instrument Level. Yes... you did hear right, you can plug right into the 2:90 with a good guitar and get a sweet clean rhythm sound. Crank the level all the way up and check out a vintage solo sound. Use the voicing features in this setup and you just may find yourself wondering what you need a pre-amp for! Seriously though, the 2:90 all by itself could and has been used as a stand alone guitar amp. Try that with your standard solid state power amp!
So beautiful, it hurts me to think about all the possibilities.😒😒😒 You can be such an inspiration to the aspiring today. Thanks for the video. Totally 😎😎😎