What is the battery pack you're using? It looks tiny, but still has many cells. Can I power these bulbs with an esc, that doesn't have Hall sensors? Does this unit get hot or something?
Hi: I see you have some experience with the cellmeter 8, and I was wondering if you could answer a question - when NOT connected to the 150W discharge module, does the "discharge indicator on the cellmeter blink or stay solid? The reason I ask is I bought 2 cellmeters and 2 discharge modules, but cant get the discharge modules to work (led on solid, no light bulbs light). and the discharge indicator on the meter is not flashing either. t 1st, I thought that was because the meter wasn't "detecting" the module, but one happy owner told me that the discharge indicator on his meter flashed no matter what. Any knowledge of any of this? Thanks! Dave.
I want to know can it discharge without the lamps? I have seen some listings with this discharger module which say 5w discharge without and 150w discharge with. Is that true
Hi , i got the orange runcam 2 and i want to use it as a head cam for hunting. Well i need your advice about the lens with closer wild angle if i will have the target Game (birds, rabbits) closer. I use the airsoft version 25mm but the image was foggy due to is a zoom lens i believe. Any advice about or what lens i should chose? like 90 degree FOV or smaller. Thanks Louis
I've got a CellMeter 8 - and 'worx' well EXCEPT the fast discharge mode with the AOKoda 150W discharge module. I have 3 AOKoda discharge modules (the bulbs/lights) and they DO WORK with an AOKoda Discharger but none of them 'worx' with the CellMeter 8 discharger I have. :(
i have bought 3 cellmeter 8 from 3 different sellers and no one had performed the fast discharge with 150w module, so i have decided to contact aokoda factory and they said to me that i have 3 cellmeter8 counterfelt (when chinese copy themselves).....
@@seewhatisee2015 I have tried two different CellMeter 8's from Amazon, neither discharge lipos with AOKoda setup.Model number LSDX1 appears on the box they came in, made in China FPV Drone.
So the CM7's balancing by holding TYPE has been removed on the CM8 and you have to use discharge instead by long holding MODE. Meaning you need to specify a voltage which you didn't need to do on the CM7 as it tool the voltage of the lowest cell?
Yes, i think you can do that with this discharger, but do be careful. Below 2.5v cells may become chemically unstable. Se best to be close to the discharge. Once completely emtpy, you can dismiss the lipos
You should tel people to only put multiple lipos on 1 board if they are al within acceptable voltage range. Or current will go from 1 LiPo to another frying your board.
Hey man, heb je kanaal gevonden. Ik kwam je afgelopen zaterdag tegen bij de uithof buiten ;) Hoe heette die tracer BBs ook al weer waar je het over had? Ik ga aankomende vrijdag (de 17e) ook naar RTT met 2 maten btw :D
