Is this product still in development and/or supported. It looks really good, but it doesn't look like there has been any activity since 2020/2021. The forum only has three posts and no activity in three years. I'm interested in using this with the UM982 and it seems like this would work, but I don't want to spend time if this is no longer active. If this isn't active, is there an open source project that could be re-activated?
We used the ESPrtk trial. (About 30 days) on 2.x.x. However, ESPrtk 2.x.x has been discontinued and switched to official version 3.x.x. All support and requests for 2.x.x version are for legacy customers only (prior to 2019) and do not apply to new users. This way, we will gradually migrate customers to 3.x.x version until 2.x.x is officially phased out in about a year (or as soon as all 2.x.x users switch to 3.x.x.) So if you are intending to test the performance of ESPrtk , please use ESPrtk 3.x.x, it works much more stable and powerful. However there is no trial version for 3.x.x. We allow free Firmware download and sell an activation key so that users can use ESPrtk in full functional mode. (As well as free and unlimited time-limit upgrades). esprtk.com/shop-esprtk-firmware-3xx/
We used the ESPrtk trial. (About 30 days) on 2.x.x. However, ESPrtk 2.x.x has been discontinued and switched to official version 3.x.x. All support and requests for 2.x.x version are for legacy customers only (prior to 2019) and do not apply to new users. This way, we will gradually migrate customers to 3.x.x version until 2.x.x is officially phased out in about a year (or as soon as all 2.x.x users switch to 3.x.x.) So if you are intending to test the performance of ESPrtk , please use ESPrtk 3.x.x, it works much more stable and powerful. However there is no trial version for 3.x.x. We allow free Firmware download and sell an activation key so that users can use ESPrtk in full functional mode. (As well as free and unlimited time-limit upgrades). esprtk.com/shop-esprtk-firmware-3xx/
Hi Simon, I'm trying to understand and test ESPrtk on ESP32 WROOM. I have the error "NTRIPClient.h file missing. Could you please tell me the reason for this error. Thanks a lot.
Very helpful video. I have just purchased a starter kit with base station and j am wondering how I could go about mapping patterns for my robot mower to cut? Any advice would be so helpful
Por favor realizar video con la configuración necesaria para trabajar con la APP Survey Master, ya que SWMAPS no es una aplicación para realizar levantamientos profesionales o replanteos.
Would you mind sharing what green circuit board you used for the base station. Wow your video is awesome I look forward to trying to follow what you have done. Tha k you for making this
I'm not using ardupilot. Just my own program. Last test day was a total fail so I went back to the drawing board. Hopefully all ones well tomorrow and I dominate the oval 😆
Yes, you can use LoRa SX1278 433->915Mhz and communicate with ESPrtk via SPI connection. It also support sending RTCM/NMEA via WIFI on it self module (No need internet). Or using NTRIP/MQTT ( need internet , it support WIFI, Ethernet W5500 or 3G Cellular module like Quectel BG96, BG95, Ublox SARA U201, SIM7600, SIM800, SIM900,.... )
Hello. cool project you have. can you help to implement something similar but on LILYGO TTGO Meshtastic T-Beam V1.1 ESP32 868. this board has a built-in radio connection right away. I have a couple of such boards and I would like to try to implement + install a separate module / but unfortunately I programmer. (possibly for a fee)
Xin chào, tôi thấy hình như bạn là người Việt Nam Nếu đúng cho tôi xin phép được kết nối với bạn bằng tiếng Việt hoặc phương thức liên lạc tại Việt Nam Nếu không đúng bạn có thể giúp đỡ tôi 1 số vấn đề, cũng như việc tôi có thể đặt hàng với bạn được không. Tôi cám ơn và mong hồi âm sớm từ bạn.
Xin chào, tôi thấy hình như bạn là người Việt Nam Nếu đúng cho tôi xin phép được kết nối với bạn bằng tiếng Việt hoặc phương thức liên lạc tại Việt Nam Nếu không đúng bạn có thể giúp đỡ tôi 1 số vấn đề, cũng như việc tôi có thể đặt hàng với bạn được không. Tôi cám ơn và mong hồi âm sớm từ bạn. +
You should configure F9P as Base first ( export RTCM). You can read 1 of our user's project here to build your own an NTRIP CASTER server : esprtk.com/james_duggan_agopengps_ntrip_caster_server_rtk/
I am in US, would you consider sharing the 3d file for the rover unit? I like to try to build one i have the Sparkfun F9p board and Mavlink 915 radios.
I imagine he's using a 915Mhz radio with some high gain antennas (maybe 5-8dBi). Also, the location of the ground station looks like its on the roof of a building so that'll help a lot. Some countries and areas have very little interference on various bands so that may also be the case here. Unfortunately, in the UK we can't use 915Mhz. We have 868Mhz and 433Mhz bands but 868Mhz is used a lot in IoT and Lora whilst 433Mhz is used by pretty much every remote switch & garage door opener so they are pretty noisy air bands. 433Mhz can still be pretty good though as long as you are out in the countryside and have enough room for the longer antenna on your project.
Yes. Please send me the videos, I will be happy to help you.😀 Thank you again for the helpful sharing. Looking forward to your future updates. Have a nice day James.
@@angelarturovelasquez6393 You can buy F9P from Ardusimple store or Drotek/Sparkfun store . www.ardusimple.com/ store-drotek.com/ www.sparkfun.com/ For ESP32, please buy ESP32 DEV KIT C board. www.aliexpress.com/item/1005001621012182.html I think you should buy OLED SSD1306 lcd and W5500 module too. Read this to connect : esprtk.wap.sh/tt/t3/create_esprtk_from_any_board.html esprtk.wap.sh/tt/t3/connect_essprtk_to_other.html Read this to learn how to upload firmware to ESP32 board : esprtk.wap.sh/tt/t3/register_update_firmware.html