Join me friends in my journey in trying out different things. I’m a very curious person and like to learn through immersive experience.
I appreciate you taking the time to checkout my RU-vid channel. If you find my videos helpful, please subscribe and give the videos a thumbs up to help me build it up 😄!
Do NOT put the black one on the black part of the terminal. It even says that in the manual. You are supposed to attach it to metal somewhere else on the car, just not the battery itself.
Mine only does it when reversing. I just replaced my u joints because the driveshaft was squeaking initially. Now noticing the scraping when reversing.
Most likely the circulation fans inside the fridge/freezer that’s broken. Also, sometimes ice buildup in the freezer vent can also cause air circulation issues.
my issue is that when I start it and move off or either fully lock or move my steering wheel it makes a creaking sound from the front ; not the back so I don't think its a differential what do you think it is
If it’s the steering wheel, could be the steering rack and pinion going bad. Recommend taking it to a mechanic as that may affect safety while driving.
Yes, it’s held up pretty good. Put coolers, luggage bags, camping tents, kayak, and canopy tent. So far so good. Driving on the freeway loaded with stuff produces louder wind noise but that’s to be expected.
Yes, you can personal with this unit. Towards the left side of the power button, you will see a “Pre Soak” button. You can combine that with the “Delay End” setting to your choosing.
It depends on how many wash and spin cycles you set the wash session. To the right side of the knob, you can set the different settings for the number of spins etc.
To activate spin only mode, you need to follow these steps: 1. Turn on the washer 2. Set the Load Mode (using the center turn knob) 3. On the menu options (bottom of were the LCD indicator is) you’ll find 4 buttons (Temp., Rinse, Spin, Soil) 4.Press and hold the “Spin” button (the one with the label *Spin Only”) for 3 seconds. This will set the washer to spin only mode. The washer will activate the water suction action (drain existing water) then after that the spin cycle should begin. Hope this helps 😄! And please subscribe!
My issue is on acceleration it sounds like nasty gears grinding and popping in the rear then it’ll clear up when I get over a certain speed, but every time on acceleration and it’s getting worse I originally thought bad CV axle but got it in the air on left and put it in drive and CV axle is fine…
Could be a bad ball bearing on the CV axle. Sometimes during higher speeds the loose ball bearing sticks to the bearing case due to the centrifugal force.
@@LoneStarSheikThis is what happens with my car. I was told to change out my Brakes and Rotors, which I did myself on my 2017 Dodge Challenger SXT Plus. The noise still being heard. Sometimes the car jerks a little from parking and just rolling and a pop sound. Also, when driving, I swerved left and right like how they do in Nascar and the noise was more. My Differential is Open Diff; the Rear Driver side gets all the power. Still unsure which part of the Differential it can be. I use a RoarPedal Throttle device. Going back to my Traxxas RC car, when I added more battery power, usually the Differential will start clicking from all the power they car gets from more Torque.
would you say it makes any significant difference? i have relatives in the national guard and i'm thinking of gifting some to them but i'm not sure if it's that useful or if it's more of a cosmetic (show off) type of thing. Thanks for the instructive video btw it was really well made
Thank you for the kind comment! Having a speed loader adds efficiency and more fun during plinking sessions 🙂. Knock on wood during war times, having the ability to load a magazine more speedily could be a determining factor for survival.
@@jonastriesanything After 2 years of it started to randomly mess up. When starting a wash cycle it would fill water then drain over and over. Had to disconnect it for an hour. Other times the self lock would also act faulty keeping my wet clothes inside. I’ll never buy Samsung again
Does LG have a interface device to troubleshoot a refrigerator. Something more in technical so we can monitor real time fan speed, compressor speed(inverter model) damper position, etc.....
@jonastriesanything I have had a LG service tech out twice for a brand new refrigerator that will not cool below 40deg set to 33. He has thrown a couple parts at it with zero troubleshooting. Seems to be a common problem for the model I bought. I couldn't find any videos of such a device to aid in troubleshooting.
The Mexican Drug Cartel version is on sale right now. I'm sure Girsan makes great pistols, but catering to drug cartels is a full stop. I'll pay more for a Beretta.
@@jonastriesanything they make a Girsan Regard with a stainless steel finish, gold colored controls, including the trigger, and white G10 type grip scales, with pictures on them. One version has a picture of Santa Muerte, and it says "Santa Muerte" under the picture. It's pretty obvious that this version of the Girsan Regard, is marketed towards gang members, and drug cartel members. I can't think of anyone else who would buy it.
@@jonastriesanything they also make a Girsan Regard 9mm 18+1, that has an entirely gold finish. However, Beretta makes one as well. A gold colored pistol is pretty tacky. I can only imagine the type of person that would buy one.
@@paulp.6399 Girsan makes a Beretta 92 clone, with a picture of one of the saints of drug cartels on the grip. They also make the same model fully golf played (I doubt it's real gold). You're welcome to look it up. They're clearly marketing to members of drug cartels. They make good pistols. But I wouldn't buy one for that reason.
Thanks for this video, our camera system went down with this same scenario situation, Thanks much, I just have to bring my voltage meter and do the same as you have done.
@@jonastriesanything Yes, thanks for the reply, only to find out that the strip it was in was not working but still going to make sure of all the other plugs I tried you trick though, only to discover no light on that main snake plug (rectangle box that you speak of and point to in your presentation.
@@jonastriesanything Our cameras are back up and running, Thanks once again for this clear and precise demonstration. t was the 12v power supply that feeds the octopus wires.
Thanks for the heads up! Yes, it’s important to check and double check and inspect equipment before use. Retighten bolts and screws and make sure attachments like foregrip, braces, sights, etc are properly installed 🙂👍
I have 2 LG televisions and happy with those. was going to buy a large t.v. for the living room. My experience with this bottom freezer LG was great till about a month ago when the compressor failed. it now sits in the garage till I figure out what to do with it. Got a new G.E. top freezer which we are very happy with. Everything is disposable after a few years, learned my lesson.
Check if your LG fridge warranty is still valid. The purchase warranty for mine was 5 years and we barely hit the end of warranty life. LG replaced our compressor for free. LG tech said the compressor itself has a 10 year warranty.
Thanks for the video. I did the test and both evaporated fan in the top and in the fridge is not blowing. What are the chances that it’s Both fans going out or is it something else?
I’m both fans don’t usually got out at the same time though it is possible. Could also be a problem with the motherboard if multiple parts are not working at the same time.