@Thatisepic3 l paid $1329. I think the Air 3 was on sale. I don't see that anymore it's back to $1549 new on the dji store. To me, it looked brand new.
@Thatisepic3 You could look at the Specta Air, which, from what I understand, is the same drone as the Air 3. It costs less, but customer support is not like dji.
Your F3 is beautiful! I just picked up a '14 ST Limited. Prior to purchasing I sat on other models and really felt the most comfortable on the ST's. I am not a big mileage person, just like to do short runs of 20-30 miles after work and I'm good.
@MrKmd27 Thank you. Most of my rides are, to, and from work. I've yet to do any real touring. I thought about buying an ST first. Just couldn't find the right one. Enjoy your Spyder! Ride safe.
Beth gets things wrong a few times. Now that being said if you have a comm system that clamps on to the helmet it might not fit in frunk unless you move the clamp towards the back of the helmet. I would also recommend a little microfiber rag placed over the visor to keep it from scratching the shield when you close lid.
@SIRyker if my helmet with the Sena 10C Pro clamped the helmet fits in the frunk, I would think most comm systems would. But it may depend on the size of the helmet.
@@chill62751 I hear ya , for me it was the bottom of the Sena 50 that kept it from fitting when it was mounted in the middle of the helmet . When I moved it towed the back it fit just fine go figure .
I have the Ryker . I can put both of my gloves in the frunk and close the lid . With enough room left for one sheet of tissue paper . I like the F3 and RT but I cannot figure out WHY Can Am doesn't make the side boxes larger ? The lean angle is not that big on the trikes !!!
I got home forgot to check to see if it fit. As I'm walking out the door I remembered and I said, nope I'm not going to let it happen! I turned right back around and delayed my exit from the home just to make sure I checked to see if my helmet would fit! 😂 I put a video up and gave you a shout out 😊
LOL. I have because I've stuffed my rear trunk with my work computer bag and other things so I had to put the helmet in there. I watched her and she didn't even try to put in the right way.
Nice vid. I have the Roe II. I use it for everything LOL. The noise-canceling works really well when I'm on the spider. When I used it inside the semi truck I actually did have to get out of the truck to go to the back behind the trailer to do something. But I left the camera that it was transmitting to in the cab of the truck so it had to work for the distance from the front to the back of the truck a little over 80 feet. You should definitely do a drive with the mic
Nice mods. It's a little hard to judge sound quality that way but they're loud LOL My windscreen was the same way but it works fine I've had it for a while now.
Personally, I prefer the larger drones. Texas can get windy at times. The Mini 4 Pro is a great drone as well. When you buy one, make sure to post some videos. Thanks for watching!
I love how you can screenshot/record the controls. It's awesome! glad you stopped at 7:15ish, I've had a power line scare once or twice. Luckily I didn't hit it but it seems they come out of nowhere lol Now I want that microphone addon for mine, As much as i talk to myself it'd be way better video.
Nice accessories. All of my DJI drones have skins. No drone should go naked 😂 My mavic pro has a red skin but the batteries are skinned with the red Baron. You also know you can get the correct SD card at Walmart or Best Buy rather than waiting for it to be sent in
@@chill62751 There are so many that I just put out a simple one of me flying. lol My Son up in MI got one too. ru-vid.comYeZzT-X_Ank?feature=share ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H20m-mim1vI.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lqyFMewOGVo.html
You can get a after market 20 round magazine, I've got 5 ,20 round magazine and it fits fine in my silver eagle, & i hear there's a 25 round drum, and I'll get that too if i can find the company that has a hem,
@terrydavenport5542 Here is a link I found on the TricLED website. This is just for the halo rings, not the fog lights. If your Spyder is 2019 or newer, you will only have DRL: tricledusa.com/products/dual-color-foglight-rings-white-amber-2015-2018-only
Don't make a video where Noone can see what the hell you are doing. This gun can be put together incorrectly many ways, but only correct one way. Please don't do ameture crap like this you will get someone hurt
Well, I am an amateur. However, I tried to show how to disassemble my shotgun. It comes with a manual. Viewers who have this shotgun can always go by it and not watch my content, and so can you. Most of these AR-12 shotguns disassemble the same way. Using the 2 wrenches was probably the only major difference. Thank you for your comments.
That is a Gen 4 not a Gen 2 AR-12. All Gen 4's have the recoil spring around the barrel. Gen 2 and 3 have the recoil spring underneath the barrel. The one you are showing is definitely a Gen 4 AR-12. The gas wrenches are a giveaway that it is a Gen 4 as well. Gen 3 and below did not need gas wrenches for disassembly.
I'm dropping a link to another video that does a breakdown. The guy says it's a Panzer AR-12 Pro Gen 2. A different video says the Gen 4 has polymer lower. The Pro Gen 2 has aluminum upper and lower. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dqvSMWO_MPQ.html
This is the SKU I bought: LNG-AR12-PRO-12PS This is the description from Classic Firearms where I bought my AR-12: Note - This is the 2nd generation pro design of the AR-12 shotguns and is also being made by a different company in Turkey than the previous models. We are told by the importer that they have had some gas system improvements to make them even more reliable with a wide array of shells and charges. Any reviews as of 11/13/2017 associated with this ad will be referencing the previous generation of shotguns as well as any live fire videos you may see. The previous generation of these also had barrels threaded for and came supplied with choke tubes, however, these did not. As such the original video shows choke tubes but please know that these do not come with them.
You know cheek riser can go forward to help with proper placement when shouldered ....placing cheek to far backwards means your often in wrong stance you should always lead with opposite leg of strong hand and lean into it. A weak position leads to jams much like limp writing a pistol.
I read a comment lately that said that the safety would not function properly on their AR 12. I KNOW EXACLY WHY! IF THE HAMMER IS STILL AGAINST THE BOLT, AND NOT IN THE FIRE POSITION, THE SAFETY WILL NOT GO ALL THE WAY TO THE WHITE DOT ON SAFE. IT'LL LET YOU KNOW THAT THE HAMMER IS NOT COCKED, BY THE SAFETY LEVER BEING LOWER THAN NORMAL IN THE SAFE POSITION SLIGHTLY LOWER THAN ON SAFE. IF YOU TRY TO FORCE IT INTO SAFETY, WITH THE HAMMER DROPPED, IT WILL SHEAR THE SAFETY AND YOU WILL HAVE ISSUES WITH THE GUN FIRING WHEN YOU RELEASE THE TRIGGER OR NOT HOLDING THE HAMMER IN THE FIRING POSITION. JUSS A LIL FYI FROM A SON OF A GUNSMITH!
@@chill62751 yeah, some are fine with no problems, but mine would not properly feed 3 inch magnum shells. 2-3/4 work fine. I took mine apart and found burs and rough spots on the bolt carrier as well in the feed ramp at the top of the chamber. It cycles way better since I smoothed those out. Im even having trouble with the 10 round mags feeding rounds into the chamber properly. The problem is that the second shell moves forward in the mag, when the gun is fired. That second shell jams alla time cause it's outta place and won't feed..... I'm gonna solve that problem by inserting a piece of UHMW nylon block in front of the shells to keep the shells against the back of the mag. That should solve any issues with the 10 rd mags. I'll update and let you know if it works or not. But I know it will. I learned about guns from the best gunsmith I know. My DAD! PEACE OUT!
Removing the barrel is extremely bad advice. My new Panzer manual warns against this because the gun must then be returned to Panzer to properly torque the barrel nut.
There is a big difference between the Gen 3 and Gen 4 Panzer AR-12. When you were working with the gas rings (those two small semi-rings), you video did not show how they are either disassembled and reassembled. Can you please show more or direct me to a place where I can learn how they fit on the shotgun. Mine fell out. Thank you
@@chill62751 I appreciate your quick reply and thanks to you I just ordered me a Silver Eagle. I enjoyed the video and God bless you and yours. Thanks 🙏🏾
What I about Tac Pro is it has an adjustable stock the Panzer does not. The lower receiver is almost the same. The Tac Pro disassembles easier . The Panzer is my wife's.