Тёмный
Nuts N’ Bolts
Nuts N’ Bolts
Nuts N’ Bolts
Подписаться
Комментарии
@superiskiausias
@superiskiausias 3 месяца назад
wondering if it fits on 300 series?
@aitvochon
@aitvochon 3 месяца назад
Where did you bought that switch?
@eczmurat
@eczmurat 3 месяца назад
directly from dremel auth. service. it was really cheap.
@AneshayOverstay
@AneshayOverstay 7 месяцев назад
How'd you do it numb nuts? Don't gloat.
@hackanibal2610
@hackanibal2610 9 месяцев назад
Hi, do your fix the chain sounds finally?
@eczmurat
@eczmurat 9 месяцев назад
not completely. it still runs perfect after 23 years so I dont really care about the start up rattle.
@johnbaker26
@johnbaker26 10 месяцев назад
Wow let me know if you want to sell it
@sergiuangelo
@sergiuangelo Год назад
did you’ve found out what was it ? mine is sounding exactly the same
@eczmurat
@eczmurat Год назад
not actually, still does the same. I was to install a new cat to see what will happen but never had time.
@sergiuangelo
@sergiuangelo Год назад
@@eczmurat I heard it could be from the oil pump, that’s why the sound comes from under the car, I will soon change it and see if it still sounds the same
@eczmurat
@eczmurat Год назад
@@sergiuangelo Not easy task to change the pump as the oil pan is splited into 2 and does not want to come out without engine lifted high. I hope it solves the noise. I don't care about the noises anymore. This engine is noisy buy seems to run forever even if you don't take good care of it. :)
@sergiuangelo
@sergiuangelo Год назад
@@eczmurat so yesterday I've found out that the noise could come from the secondary air injection, and from few chats with other slk owners it seems they have the exact same noise on cold start ups, I will just leave it as it is for now and enjoy it :)
@15DJONYX
@15DJONYX Год назад
Mine shakes🥲
@jameslaraia
@jameslaraia Год назад
Just bought a dremel 200 and immediately thought there must be a way to change the switch or swap to a potentiometer. Your video was the first that popped up after a quick search. Cheers!
@eczmurat
@eczmurat Год назад
Yes, without adjustment high speed is too fast for most bits/accesories. Highly recommended. Mine still works perfect.
@bejaminusein1081
@bejaminusein1081 Год назад
Did you fix the problem
@morenabanal2677
@morenabanal2677 2 года назад
Mitici motori
@itsjordo
@itsjordo 3 года назад
I get a bit of rattle only after 2-3 days of sitting. Glad I read these comments, don't think I'll replace the tensioner now.
@RevAK47
@RevAK47 4 года назад
Bro that’s was done in lightening speed or maybe I’m a slow reader but it moved to fast from slide to slide
@eczmurat
@eczmurat 4 года назад
Rev_A_K I just had pix at that time, maybe you can try to pause between slides...
@RevAK47
@RevAK47 4 года назад
Nuts N’ Bolts thanks slowed it down in the settings. Did you put it TDC first? So that tension doesn’t cause a jump timing or mess up the teeth?
@eczmurat
@eczmurat 4 года назад
Rev_A_K sorry I dont remember it now. better to tdc just in case. but whole process is easy once you have the SC out
@mrscripter4164
@mrscripter4164 4 года назад
Have the same car it's honestly quite good for a such an old stock car.
@eczmurat
@eczmurat 4 года назад
Mr Scripter that vid was taken 8 years ago. I still have the car and still drives the same. :) lovely toy
@carlosvallejo4326
@carlosvallejo4326 5 лет назад
Did you need special adapters to use this fuel gauge? Can it work with universal fuel port adapters?
@eczmurat
@eczmurat 5 лет назад
Carlos Vallejo no, it was direct fit. probably universal.
@carlosvallejo4326
@carlosvallejo4326 5 лет назад
@@eczmurat ok, that is a great notice, I will buy it soon, thank you friend.
@eczmurat
@eczmurat 5 лет назад
Carlos Vallejo youre welcome also it comes a narrower adapter in the box if I remember correctly.
@alloramakak2.091
@alloramakak2.091 5 лет назад
I got 2 w203 c200 kompressor with the M111evo Engine and both of Them make this Noise on cold Start, it Sounds like chain rattle. Do you know where the Sound comes?
@eczmurat
@eczmurat 5 лет назад
Artur Ku it gets louder in years. i feel like bad cat, resonator or just some exhaust leak. because it comes from below, not engine. and only makes it during sec. air inj. it must be the noise of burning extra fuel with air injection in the exhaust. I am now changing the cat with magnaflow direct fit. lets see the result.
@alloramakak2.091
@alloramakak2.091 5 лет назад
do you have the result? I am already looking forward
@alexberlein2829
@alexberlein2829 5 лет назад
hi i have a c180 2002 with a m111.951 engine in it. it has a slight rattle in it sometimes for the first 2 seconds on cold start up. would replacing the tensioner help? if so im guessing the procedure is similar to your video.
@eczmurat
@eczmurat 5 лет назад
Alex berlein I have done many things to get rid of the that rattle in 12 years. nothing solved completely. its probably the check valve that feeds the tensioner. but you need to remove front lower cover to reach it.
@robertsekrst8020
@robertsekrst8020 5 лет назад
I have the same engine and problem. I suspect its the oil check valve - A104 180 0432. The rattle at cold start is caused by the faulty valve. As the oil pressure builds up after start the rattle dissapears after a few seconds...
@eczmurat
@eczmurat 5 лет назад
robert sekrst also molygen 5w40 helps alot
@Jalkku
@Jalkku 5 лет назад
Why did you replace only the tensioner, not the entire chain? I have the same exact engine and it has started to rattle when warm on idle, I'm just wondering if this would help with it. Did yours rattle before the replacement?
@eczmurat
@eczmurat 5 лет назад
mine was rattling only at cold startup for 2-3 seconds. I was suspecting the tensioner not holding oil and draining due to clogged valves inside it. It helped but not completely gone. check my video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-s8QbVvPoifY.html it rattles at 0:52. I don't know what causes this.
@Jalkku
@Jalkku 5 лет назад
I see, thanks for the reply. Probably not a job that would help with my case then.
@4u2nvy2k7
@4u2nvy2k7 11 лет назад
time for an upgrade fella
@mvogt
@mvogt 12 лет назад
Pretty good for a 2l r4. I have the preFL 192ps SLK 200K.