Have you tied the #1 hook first then tie the #2 stinger second? Would seem easier. And please tell us where you get all of these components. Very good video@
What kinda weight do you run with those? Last coho season was my first year trolling flashers, mainly stuck to the 360s but man that’s one hell of learning curve and expensive too!
Not a specific weight per say, I loke to keep my lines at a 45 degree angle so depth, current and speed will all dictate the amount of lead needed. But, much less than a 360 does.
I’m new to trolling by flashers, first couple times out wasn’t very much fun, tons of line twist couldn’t get the weight right. Getting it dialed in now and got our first naive coho buck to the boat a couple weekend ago on your flashers. But I’m still getting line twist even with vip line locks and weight spreader bar and like 4 5 bead machined swivels? Any ideas what I’m doing wrong?
Not sure what you mean by weight spreader bar? You should have main line with your line lock secured to a 6 bead chain. 6 bead chain to your (whatever length bumper) to a good ball bearing or 6 bead swivel. Swivel to your flasher then back to your lure. If you aren't running heavy enough lead it could be flipping over the line and not "locking" there.
So when your trolling 360s do you want your rod in the rod holder basically horizontal to the water like that? I was out today trolling 360s for the first time and had a problem with them wanting to come up even with weight on them but my rod tips were at more of a 45degree angle. Was that my issue?
Personally I like it horizontal but have seen many boats running it with tip pointing at the water. I want the rod to load up and not just work at the tip
Hoping you'll see this question since this video has been out for over 2-years. Question: does a weight dropper make a difference in flasher action? Put another way, say you're using 16 oz lead, if dropper length is zero inches (connected directly to the weight slider) is the flasher action more or less, faster or slower, or otherwise different than it is if the lead is, for example, on a 12-inch dropper ? Apologies for the long-winded request.
Rick, lots to unpack. Dropper changes the way the line moves in relation to the lead. If you have a 12" Dropper, it will allow the flasher more freedom to swing but it gets a little Sloppy. Meaning if your using a 16oz lead with no Dropper the line won't swing side to side. If the Dropper is there, there is a "fixed " point in the line. Long story short. Shorter the Dropper the more pop the flasher will produce. That said, some days the Dropper or no Dropper makes all the difference
@@shortbusflashers1281 Thanks JT. Yeah, it just seemed to me the dynamics of dropper/no-dropper would have to impact the flashers movements in some way. Your response makes total sense. The variables and varied outcomes are things that make fishing so much fun and keep things interesting (tho I don't tire of "catching"). If I could hit a home run everytime at the plate I'd probably get bored. But that feeling of contact between bat and ball is so wonderful, well, it sure keeps you coming back. Pardon the baseball anology, lol. I love your products, and use one or another or several of them every time out.Thanks again.
Hi, can you use the sliding lock when using a down rigger, would you still have to use a weight on it, or with a down rigger you wouldn't use sliding lock at all ? Thanks
Carl, with a downrigger you shouldn’t need lead, the downrigger will achieve the same thing. As for stopping twist, the release on the ball should stop it at that point. That said, you will need to mind line twist in the area of your setback
Not a treble, it is two hooks stacked. The single hooks have a deeper bend and seem to keep the fish hooked better than our stats with the treble so I made the switch
@@shortbusflashers1281 Ah I mean on the regular spinners. Sorry for not being clear. The mono spinners are more similar to a regular mooching or bait leader with the beads and spinner stacked on top right? But if you're having better hookup ratios on this double stacked single hook setup then why go to a treble for the wire spinners?
@@chillipphi Honest answer.... Its what the industry does, even if it is a better configuration for my personal use, it is so hard to convence people to use it if it looks "different" from what they are used to seeing its a harder sale.