Тёмный
Larry Falck
Larry Falck
Larry Falck
Подписаться
Комментарии
@foreverblkeyed
@foreverblkeyed Месяц назад
Is it in the same place on a v8! I can’t find it on my v8
@larryfalck913
@larryfalck913 Месяц назад
@@foreverblkeyed I'm sorry but I don't know. I'm only familiar with the V6
@philip6419
@philip6419 4 месяца назад
Jeez.. Where's my Dramamine??
@BillyThee
@BillyThee 4 месяца назад
that look like IAC valve not PCV valve to me.
@mylesm7947
@mylesm7947 5 месяцев назад
Thanks for the vid ,1st showing the actual PVC part
@ratbikerustygold3398
@ratbikerustygold3398 11 месяцев назад
Thx
@solluna2155
@solluna2155 Год назад
Thank you sir !!
@bear831tiger
@bear831tiger Год назад
Thanks I had the exact problem with same vehicle,, thank you for uploading
@larryfalck913
@larryfalck913 Год назад
You're welcome! Glad it helped
@bastykoye8726
@bastykoye8726 Год назад
This is the top sensor ?!
@BabylonGames798
@BabylonGames798 2 года назад
Why not show how to get the breather off, since that is in fact part of this job?
@larryfalck913
@larryfalck913 2 года назад
I thought about making the video after I had done the work. There are a few screws that need to be undone. It's actually pretty easy
@BabylonGames798
@BabylonGames798 2 года назад
@@larryfalck913 There was a plastic sort of screw on the bottom that was very stuck in there. Spent so much time looking for a recular screw or bolt when that was completely hidden from me.
@chemicals9820
@chemicals9820 2 года назад
Nice
@jesuscotto1331
@jesuscotto1331 2 года назад
I have the same truck..my ac isn't blowing cold I charged the system and the compressor engages..any idea of what it could be?
@larryfalck913
@larryfalck913 2 года назад
I really have no idea. Maybe a temp sensor? Unfortunately, I'm not an expert.
@wattsop4183
@wattsop4183 2 года назад
Just did this job myself because the sensor was leaking oil. Put the new sensor in and was loose. Thinking this may be a problem
@Michael-w8v
@Michael-w8v 3 года назад
Here is a tip. You should never put magnetic on this sensor, this could damage it.
@larryfalck913
@larryfalck913 3 года назад
Definitely would never touch the sensor itself with the magnet.
@jessliz7
@jessliz7 3 года назад
That is not a PCV valve the PCV valve is located near the oil spout and it's l shape for that particular make and model
@larryfalck913
@larryfalck913 3 года назад
It is the PCV on the 07 model. It's different on earlier models.
@Embermist69
@Embermist69 2 года назад
07 3.7L V6 have them there, the 07 4.7L V8 is the oil spout. Dumb design in my opinion.
@ginasmith766
@ginasmith766 3 года назад
‘05 Dakota drivers--the PCV valve is located below the oil fill on the left. It’s difficult to access. Remove the entire air intake housing to get a little more room. Even though these models are in the same generation, the PCV is in a different place.
@impulse959
@impulse959 2 месяца назад
Depends on what month it is. Mine is in this location.
@sergiopiedra3519
@sergiopiedra3519 3 года назад
Thank you for the video, this has helped a lot!
@larryfalck913
@larryfalck913 3 года назад
Glad it helped!
@karlporath8904
@karlporath8904 3 года назад
Just Got done with a standard 14hr day (trucker) on my 40 mile commute home my 300,000 mile Dakota Started cutting out if I gave more than 1/2 inch of go pedal. Parts store, scanner, $27, and a 10mm. Thank you much, sincerely Angry Vet up here in Detroit.
@chrismiller1503
@chrismiller1503 3 года назад
Thank you
@starlingsimmons6583
@starlingsimmons6583 3 года назад
Can this cause start up problems and hesitation of the engine??
@DMac123
@DMac123 Год назад
sure can. That is what my dodge dakota is doing. i got a code for the cam shaft position sensor after 2 years of it doing that.
@glennschaub6303
@glennschaub6303 3 года назад
Use a 34mm deep socket !
@s.b.7838
@s.b.7838 3 года назад
I have the same truck with code P0456, very small evap leak. I cannot for the life of me find the evap cannister or leak detection pump. I looked underneath the vehicle (and all over) and the only thing I found was something that is on top of the gas tank, and inaccessible without removing the gas tank. Could the evap cannister and leak pump be somewhere else? If so, where? I'm thinking one of the hoses going to these parts may be the cause of the leak. All other hoses are in mint condition. Thank you!
@larryfalck913
@larryfalck913 3 года назад
I really have no idea. I've never had that trouble before. I'm not an expert lol. I hope you're able to find out what's going on!
@thefaith6891
@thefaith6891 3 года назад
How did you know it was bad ?
@larryfalck913
@larryfalck913 3 года назад
This was quite a while ago, so I don't remember the symptoms. But, I'm pretty sure the engine ran roughly, and it may have felt like the truck wouldn't go through all the gears. I checked the trouble code and the cam position sensor is what it said.
@supersam8166
@supersam8166 4 года назад
Super info tks
@franciscohunter4422
@franciscohunter4422 4 года назад
Thanks 🙏 brother for show us your knowledge very appreciate.
@elcidlord
@elcidlord 4 года назад
Suggest using laser pointer of screw driver to pointing where PVC valve is. Thank you.
@allenmoses110
@allenmoses110 4 года назад
Get a better video recorder!
@Misfitsocks1
@Misfitsocks1 4 года назад
Thank You, Have same Engine, This helped a lot.
@ytmm9055
@ytmm9055 4 года назад
thanks
@jabsage155
@jabsage155 4 года назад
Thank u Larry now I no what to do tomorrow ur video was very helpful keep them coming
@ellieysama
@ellieysama 4 года назад
Actually if you remove the wheel or even having it on a level ground you maybe able to access it from there since its so close to the side to remove it without the need of removing the breather unit.
@larryfalck913
@larryfalck913 4 года назад
Trying to reach up from underneath isn't very easy. It was just out of my reach. And it's much easier to remove the breather than the tire.
@ellieysama
@ellieysama 4 года назад
@@larryfalck913 Hmmmm never thought of that, gonna give it a try then.
@gabewhisen3446
@gabewhisen3446 5 лет назад
So did that fix the problem ???
@larryfalck913
@larryfalck913 5 лет назад
I really can't remember! I had injector problems too. So I can't remember if this fixed a problem before the injector ones.
@justinvilla6313
@justinvilla6313 5 лет назад
Thanks man have the same truck to so this helped a lot 👍
@justayoutuber6183
@justayoutuber6183 5 лет назад
Was the check engine light on cause of this? If so what code was it??
@larryfalck913
@larryfalck913 5 лет назад
I think the truck was just running rough from what I remember
@MrRiteoff
@MrRiteoff 6 лет назад
Dude I can not find that hose on rock auto or at the dealer? If you have a link to it. That would be great
@nathandeunk3533
@nathandeunk3533 4 года назад
www.rockauto.com/en/parts/mopar,53032993AF
@metalhalide4043
@metalhalide4043 6 лет назад
What are the symptoms of the PCV valve going bad? I have the same engine and PCV in my Jeep GC.
@larryfalck913
@larryfalck913 6 лет назад
Sean Nugent I honestly can't remember. I think the truck was throwing the code for the PCV valve, that's how I knew to replace it. I guess in future videos I should say what the symptoms were that caused me to replace that part!
@TaijiArban
@TaijiArban 5 лет назад
I just replace it when I change the spark plugs every 30k miles. It doesn't cost much to begin with and it can lead to major problems if it goes bad.
@jorrin007
@jorrin007 5 лет назад
fluctuation in engine idle - rough engine idle. check engine light comes on. CODE P0507
@timhoyer8049
@timhoyer8049 6 лет назад
Helped tremendously! Thank you sir!
@Dvanlehn1
@Dvanlehn1 6 лет назад
Thanks for the video, took me only 35 minutes to replace mine because of it! Clear simple instructions and you had the advice for how to approach it. Well done!
@larryfalck913
@larryfalck913 6 лет назад
Dvanlehn1 Fantstic! Glad it helped!
@Rajen51able
@Rajen51able 6 лет назад
Big help Thank you ! you made this job easy!!
@larryfalck913
@larryfalck913 6 лет назад
Rajen51able Excellent! Glad it helped
@bennypena2883
@bennypena2883 6 лет назад
That's the crank shaft sensor. Cam shaft is on the bottom
@larryfalck913
@larryfalck913 6 лет назад
Benny Pena No, I'm sorry, it's the cam position sensor www.justanswer.com/dodge/3ruke-2007-dodge-dakota-3-7-v-6-two-days-ago-engine.html
@bennypena2883
@bennypena2883 6 лет назад
Larry Falck your sure right.
@carlosmunoz2290
@carlosmunoz2290 6 лет назад
Hi is there 2 pcv valves? I have a 06 dodge Dakota n it has has the pcv were the motor oil goes in We're did you buy the hose at?
@larryfalck913
@larryfalck913 6 лет назад
Carlos Munoz You have the 3.7 liter v6? I think the v8 has it on the oil filler. I ordered the hose online. Can't remember from where
@larryfalck913
@larryfalck913 6 лет назад
Looks like the 06 is a different one. I got mine from rockauto.com
@sofiaoropesa
@sofiaoropesa 6 лет назад
thanks
@larryfalck913
@larryfalck913 6 лет назад
sofia o You're welcome
@tamimihayat
@tamimihayat 7 лет назад
Shalom, אָלֶף I'm a Muslim and really liked your video on Jewish Concepts of God-In Hebrew Bible and and then this on Maimonides. Can i get a copy of this book in pdf for research purpose. I am a student of Islam and finds your basics 90% close to what Islam teaches and would like to invite you to read Quran and see how to complete 10% remaining faith and get 100% salvation :) peace.
@larryfalck913
@larryfalck913 7 лет назад
Thank you. I don't know of a pdf veresion, but I did find this one on Amazon www.amazon.com/Finding-God-Ten-Jewish-Responses/dp/0807403121
@tamimihayat
@tamimihayat 7 лет назад
appreciate thanks a lot
@skippyskipala
@skippyskipala 7 лет назад
thanks a bunch!
@larryfalck913
@larryfalck913 6 лет назад
skippy carver you're welcome
@jakesnake66
@jakesnake66 7 лет назад
thank you!!!!
@larryfalck913
@larryfalck913 7 лет назад
jakesnake66 You're welcome
@earthwaterairspiritfireleb5482
I am an israeli scientist, trying to discover a way to unleash the ultimate love on the world. A platonic love that so encompasses people that scripture means nothing but joy and moral deeds are automatic, transcending ritual. A love that causes charities to fill and people of all cultures to respect one another and realize the oneness though we worship in different ways, its essence is one. I've spent months in loving kindness meditation, and I think I've found a solution. The trick to unleashing the love is realizing its already there. Everyone around me is love drunk and so am I, I accept them completely because I know how powerful love is. We've seen millions of guns turned into flowers by pure love. None of lifes problems are real, we've solved it all just by loving them. God no longer judges, God just loves. If I said, I am not loving my most, others are not loving, we must improve! I deny the reality, I am loving everything and so are they, even if at first it doesnt seem so and theres nothing wrong with the world right now. Accept it even if it seems short of expectation, start loving it now!!! It is already perfect