That was a nice timelapse and overview of the trails. That's where I bike as well. There's also a new trail in Leon Valley that connects Leon Creek Greenway from Border Brook trailhead to Heubner Onion Natural Area.
The LT Trim basically makes adaptation based on information from the STFT.. so it sets new baseline based on the data from the STFT.. so with the new baseline, the AFR goes to optimum
The LT Trim basically makes adaptation based on information from the STFT.. so it sets new baseline based on the data from the STFT.. so with the new baseline, the AFR goes to optimum
The LT Trim basically makes adaptation based on information from the STFT.. so it sets new baseline based on the data from the STFT.. so with the new baseline, the AFR goes to optimum
The LT Trim basically makes adaptation based on information from the STFT.. so it sets new baseline based on the data from the STFT.. so with the new baseline, the AFR goes to optimum
The LT Trim basically makes adaptation based on information from the STFT.. so it sets new baseline based on the data from the STFT.. so with the new baseline, the AFR goes to optimum
Magkano pa gawa automation plant monitoring system Gaya ng nutrients ex: A, B, C mag mix na sya at mag dilig kapag mainit 28 deg temperature ang panahon at fan
Long Term is the window of time the adaptive memory dictates the fuel trim, Short Term is live data calculating to learn the parameters for the adaptive memory to update the Long Term. The O2 sensor signals lean below .45 volts & rich above .45. The Engine Controller only cares about that threshold & uses that to determine fuel trim. .. in other words the computer calculates the % of time that the O2 sensor is past the threshold of .45 volts & does that each time the threshold is crossed.
Hi i have a gravel bike cannondale and I dont know if this kind of wheel is tubeless ready:Could I tubeless this wheel or can't I? which wheel would you recommend me?thanks
Hello. It works very well, but there is a problem. For example, if the irrigation percentage is set to 60 percent and as the soil dries, the value changes to 59-60 or 60-61 percent and then the relay switches on and off which is very confusing. is there any solution? relle delay or similar...thanks. Kumusta. Ito ay gumagana nang mahusay, ngunit may problema. Halimbawa, kung ang porsyento ng patubig ay nakatakda sa 60 porsyento at habang ang lupa ay natuyo, ang halaga ay nagbabago sa 59-60 o 60-61 porsyento at pagkatapos ay ang relay ay bubukas at off na kung saan ay lubhang nakalilito. may solusyon ba? relle delay or similar...salamat.
Hello friend. Question? I was able to add "Tourqe" but on the Data Logger File, I try to click on the video I'm trying to add, and it says "does not contain embedded data" Any idea what that means or how to fix?
It’s to allow the air in the pan to escape while it’s being filled with oil rather than having it only be able to escape from where it’s being filled and causing bubbles and splashes. basically it’s meant to be drilled, it should already have a hole there from the factory but I guess that’s too convenient for customers.
Hello sir. Magtatanong lang. Yung LTFT ko 0 lang kahit i-rev ko ng matagal hindi siya nagbabago. 15mins+ na nakasindi makina pero hindi nagbabago. May error na P0130.
Hello @MotoArk ang P0130 error code ay indicator na sira ang bank1 oxygen sensor mo. It could affect the readings of the engine computer. Suggest na tingnan mo yung sensor by looking at the output waveform. If hindi mukhang sinewave, then papalitan mo na
Thanks for the video. I need some help though.. I'm really messing around my watch so the analog is right on time but the digital is far by miles.. and even I choose my city the digital and the analogs go wrong can you help me please?
@@PinoyPadyakero thank you for the answer. I tried to do the things I saw on some videos.. every time I try to adjust the time ,not by city because it's completely off, it returns again in previous time.. I can't find a video to do the proper settings in the digital time.. I tried to find the way to return the watch in default settings so I can adjust the city
fill pot to full saturation (this may take multiple watering's over a few hours as the soil will get hydrophobic). wait 30min after full saturation. this is where 100% soil moisture should be calibrated to.
This is what im looking for. Thanks po. Question, pano nyo po ginagawa yung ganyan setting na parang real dashboard talaga sabay kita yung rpm at speed