@@EverydayJ1786 the inside of the drawers measure 21”. The shallow drawers will have a lock mechanism taking up about 7/8” at the top of the drawer. Hope this helps!
Just got one and these things are great on the Mini Z RCP tracks. Setup some jumps at the local shop and ran with a few of the other guys who bought them. Mine is the same color but I'm going to make some changes so I can tell the difference from the others.
I cut some magnets into small size using a air grinder under running water so there is no heat build-up that can damage your magnets! Now its quick and easy to get my cab separated bought magnetic connectors for between cab and chassis so 15 seconds and it two parts!
My son just started CNC machining school here in Ontario, he's having problems in lathing with the math, would Millwrighting be easier in your opinion?
@@John-kr7iz you have to learn how to use a lathe and mill when becoming a millwright but it’s not in depth. Just the basics. That being said you will encounter lots of math and formulas becoming a millwright as well. Everything from gear ratios to calculations for cylinder sizes and pressures in hydraulics and pneumatics to lift heavy loads and also electrical calculations for voltage,amps, and resistance. That is only a few calculations and formulas. Just a heads up if math is his weak point.
I find that rubber rips easy once cut. I just glue mine back on. Once they fall off in a couple month I just glue it back on. Yes you do need to get back out.
@@mrk8212 they’re definitely not for everyone. You need an area to run them where the noise doesn’t bother anyone and some mechanical knowledge for tuning the motors.
cool truck, congrats! To your point on the rear squat... other running vids of this truck show how much the rear squats and the front lifts under power. I wonder how much it affects steering authority.
@@GottiRC so far I’ve fouled 2 spark plugs (Rich mixture). I’ve added a remote kill switch. And as far as broken parts I stripped out one of the brake rod adjustable stops. I’ll do a full review once I get some significant run time on it.
I just bought mine and I have had it for 2 weeks and my pipe snapped at the header I welded that and now my throttle servo failed and stuck wide-open I was in grass so I pitched it into donuts and ran over to it unfortunately it died b4 getting to it so I'm sure I hurt the motor to
