Question Sir, Did your lug nut studs rub against the wheel ? I have 2021 scat pack Challenger and i ran into this issue with the exact same wheels. There is no space for me to insert and thread the lug nuts. Any knowledge is appreciated
My wheels are 9.5 inch wide I believe this allows me to run with out interference. You could also run a 5mm spacer maybe? I now run a 315/35r17 a shorter tire to help me out of hole.
Thank you for the video!! what about the times??, did you do best times than before? I'm thinking to buy it, but I would like to know if you saw improvement.
I have the blue intregy lowered chassis with different shock mounts. I take 80mph turns. I don't recommend you rebuilding the whole car for that chassis unless you have done it before. You may take apart to much. It's only 8 main screws.
My air box was from a 17 ... but from what I saw they 15-19 should be the same but I'm not sure above that year. I think any can be used as long as it is from a challenger.
the slash 4x4 the sway bars are mounted in a different position than a slash 2wd that the diffenent between the twe trucks i no it weird but everything on a 4x4 fit dirrenent every thing dont mount the same way
Thanks for the close-up shots of the install. Since Hot Racing offers zero installation instructions, this was extremely helpful for my 5yr old’s 2WD Slash. 👍🏻👍🏻
Did a bit of research and looks like the stampede has a little bit longer control arms but as long as the mount holes are ruffly the same I would think it would work fine.
The angel of the bar would have been almost straight up I needed it to be as level as possible. This set also works on the low center gravity chassis. With the original shock towers still running them to this day.
That is not the way. You will snap the mounts on the front end on the first light impact . Promise. Sounded good and I get it but Noo Noo don’t to your self!!
I don’t know man. It’s set up just like yours but lcg chassis and tried them again and light bump to the front end and heard a pop and knew exactly what it was. It’s snapping the push rods. Just trying to keep up with Losi with slash🤝😊
You put the back on completely wrong you don't need to cut a thing they wouldn't sell you a part you have to modify the structure of your car so much with. The back bar goes on the opposite side of the shock tower you have it on. When you do this btw it makes it actually work too
Josh Palmer maybe if came with any kind of institutions people could install it correctly if you a link that shows how it goes I'm sure others would find it useful.
Kevin Story I agree instructions would be sweet lol I'm working on a video now so people don't cut their towers or anything as yours is the closest I've seen to right
Kevin Story I spent a long time trying to figure it out tho I understand the frustration. If you mount it on the backside instead of front it works great :)
My friend that owns this car has a 74 cuda that has run 7.73 in the 8th mile on street tires .. the duster was just a low buck winter car that we were haven' fun with ... by the way I didn't see any videos of your car(s) doing any thing fun or useful this is .. because you have NO videos !!! Post something YOU have and then you can talk buddy. Have a nice day :)