IN-DEPTH EQUIPMENT REVIEWS | BEAUTIFUL TRAIL COVERAGE | BUILD ADVICE | As well as covering all aspects of the Jeep and Off Road communities and Lifestyle. It's all right here for you to enjoy.
The Bump Stops have been on my Jeep for about 2.5 yrs. I have had no need to rebuild them as they have not leaked and have performed flawlessly. Good hearing from you✌🏻
Hey Rubi! With the 37's aired down it was getting bad, I couldn't turn unless I could roll a few feet, which is not always possible offroad. I was also overheating the P.S. fluid. With the Apex installed, I can now turn the wheel while aired down, no issues. It's so seamless, I sometimes forget I'm running it. Definitely recommend!
Here's the link for the Amp'd Throttle Booster. Be sure and order the correct device for your powertrain. www.holley.com/products/tuners_and_programmers/throttle_sensitivity_booster/parts/48868-JL2
I have a JL Wrangler on 37" Nitto Ridge Grapplers and running 4.88 gears. This combo got me very close to the stock set-up and works perfectly. You must be really feeling the 37 and 3.73. My JL is a Rubicon, so I was starting with 4:10 gears.
Hi Humberto! I spoke with Holley/Superchips about this very topic a couple of weeks back and was told they do not currently offer tuning for the 2024. I just inquired again asking if a 2024 tune is in development. I'll let you know what I hear back.
Hi again, I got a quick reply back from the tech(s) at Holley. Flashcal products and support for the 2024 are available. The tune is in the works. No ETA available yet. For 2024, Jeep is using a new ECM type and Holley/Superchips is working on it. Hopes this helps.
Well to say how impressive this is just will not cut it.....this is for me....a big deal... watching this young lady do what she gets done on the trail...is the best....watching her on MORR she gets to be part of recoveries....and welding in the shop and so much more.....I know she has a great future ahead of her.
I know I’m 3 years late. But better late than never !!!. Just ordered a set of falcon 3.3s , metalcloak long arm upgrade and fox 2.0 bumpstops. After 3 years with the fox bumpstops how are you liking them ?
Hey Zach, great hearing from you! You going to love the 3.3's/MC long arm/Fox 2.0 Bumpstops. The Bumpstops have performed perfectly, definitely recommend them.
What an excellent review and vid! Just straight to the point with everything! We released a portable Jump starter. Are you interested in giving a review?
Thank you, really appreciate the compliment. Yes, I would love to discuss doing a product review on your portable Jump Starter. Please reach out to me via email. Talk soon.
Hi David. Did this just start? Any other symptoms? Let me know if you can provide more info. I can reach out to RSE. Have you spoken with RSE about this?
No it’s all the symptoms. Been doing it ever since I got them installed. Went to the shop and said I gotta keep battery on charge if I ever leave it that long. I emailed them… got no response from RSE
@@davidbautista9679 Ok, I'm going to reach out to them and see if we can get you some help on this. A little more info would help. Are these Gen 2, Gen 3? What Jeep are they on, JK or JL? How long have they been on your Jeep?
You are a very good content creator. But you are not getting what you deserve because your video is not SEO-optimized. That's for your video is not getting more views, likes, and subscribers. If you want your channel to grow then it must be focused on your video SEO section. This matter I am helping you if you want.
Hi, and good hearing from you. I intentionally left specifics out of the video, things like how much toe in or toe out as rigs are set up differently. I thought one could see how to use it pretty well from the video I presented.
Getting them cooler screws started was PITA like no other. I swear the new design saves you time by not having to remove your front bumper and grill, but man getting the screws on takes about as much time. Instructions say to remove the sandwich plate and put back just the HP line. Is it ok if I leave mine on?
Apologies for not getting back to you sooner, we've been out shooting content. Agree, those cooler screws are tough. That shouldn't be an issue leaving the sandwich plate on. Do you feel you want to reach out to Apex for verification on this?
@@ExpeditionBuilds No worries you replied within a day that is actually pretty fast. The instruction manual says to remove the sandwich plate and install the HP line by itself, but why is there a need to trim the mounting bracket if that's the case? I think they are contradicting themselves here. I am just gonns leave it as it is.
@@ghernandez6457 Sorry I don't have an answer as to why the instructions ask for the sandwich plate removal? If you feel good about your install, roll with it.
What brand of side signal/marker lights are those on your jeep? I love these, I want exactly this style. I want to get rid of the oem, and the part that hangs down in the front below the side lights, but I didn’t want to remove the fender lining and the lower portion like everyone else does when they run these new blinker markers. Please let me know what these are, thanks!!!
Hi, and great hearing from you! I am running the Rugged Ridge Fender chop kit. I chose this kit because it allows me to keep the inner fender liners as well as the black edge trim. Also look at the new fender chop light from American Adventure Labs. Let me know if you have trouble locating those, I may be able to help.
Will these mud guards fit my 2023 HighTide Wrangler Jl it has the extreme recon package also? Any help for the ones that fit the rear would be great. ✌🏻
Hi. The tuner cost is ~ $540.00. A couple of ways to do this. Follow the instructions on the Superchips website. - Send your PCM to them to be unlocked. They send it back with the new tune. - Buy a new PCM (with tune) and keep you stock PCM (+$600.00) Let me know if you have any additional questions, glad to help.
@@ExpeditionBuilds This still work for the 2024 model? I thought I heard somewhere that these no longer work for some of newer models, but I may have dreamt that. Haha Great video btw!
@@bcraftmath I'm not sure about whether or not this tune works on the 2024? I plan on checking in with Superchips next week and I'll ask about the status for the 2024. Thanks for the compliment on the video✌🏻
@@ExpeditionBuildsI'd appreciate that! I don't see a flashpaq fire my 24 4xe 2.0, but man of love something like this to get a lil more umph from the bottom.
Keep it up Danielle ! I have the same issue in Arizona lots of garbage on the trails , we get a lot from target shooters that bring out items to shoot and never take back home plus illegal dumpers and being close to the border I can fill up my truck bed with clothing and 1 gallon black water bottles left behind by drug smugglers and migrants . If anyone can find a use for millions of plastic 1 gallon jugs I got you covered
Hello Ricardo, good hearing from you! I appreciate your personal efforts in helping to clean up after those who see fit to litter. We all have a part to play in this. Be well friend.