Not even going pretend I would know how a one take would be done properly. I'm an amateur at best when making videos. But what I do know, is how to get any quad to fly right. If you're in the industry, maybe we could collaborate. Worth a chat.
You'll have to use the smart audio feature in your goggles. You don't need crossfire. On your radio, you move left, stick up halfway , then to the left. Hold it and push the right stick all the way up. A menu will show up on your osd. Go to features then to VTX. You'll see all your options there.
Oh, from my other video!! Haha! You clearly don't know what a diff all is. What you see, is only PID parameters taken from a diff all. Not a complete diff all. If you copy and past that into your CLI and type "save". You get the PID tune. But I'm not sure you should do that since you can't tell the difference. Good luck!
@@SOKOL60A I added them to the description. I separated the filters from the PIDs. Copy and past into the CLI, hit enter and type save, hit enter again. One thing you'll notice, is I've removed all throttle boost. There's no need for it with AM32 and this application.
thanks, just playing around...2S... esc-configurator.com/...leave everything at default except, push the start up speed all the way up and make sure your motor poles are correct. typically small whoop motors are 12 and anything bigger than a 1404 will be 14. anything in between, count the magnets. 15deg seems odd. in blheli, I'm at 23. I pushed it up and the flight performance went down. the KV slider didn't help either. left it at default
In retrospect, I should've went with an external vtx, but I wanted to give it a try. I did raise it up about a 1MM off the frame, and it helped a little. But there is not much more room on the frame to get it any further from the carbon fiber.
I ended up crashing and blowing an ESC. I bought the other AIO without the VTX and installed a 1 gram Foxeer Reaper 350MW. Motor noise is gone. Also, update to the newest AM32 ESC Firmware. It's a big step. Use am.ca online configurator. It's a really nice app
First of all, that was a dope pack! 2nd YYYOOUUUUU got that mothrefcuker locked IN!! 3rd y u flyn my siht all ruff??😂😂😂😂😂😂 it's demibot it won't break TY bruv 1❤
It's 2 different frames with nearly identical tunes. They're the same weight of 49 grams, size, FC, motors, batteries. Feed forward really isn't going to determine a flying quad or not. You can use either. This is the one I used on this day. The other on that day. But it such a minimal difference. One might be a little tighter is all. Just copy it and place in your CLI. If you're still having issues, it's probably a hardware one. They're both less aggressive than stock BF so there shouldn't be any issues with it.
Just saw this. The one in the video is the 20X20 FC only. I'm on the fence still with the AM32 ESC they make, as far as FPV goes. That's what's on the AIO. But, you can do a lot more with it. Like run a crawler, fairly easy from what I've seen. I have the 30x30 60AMP skystar I'm toying with. I just can't get it to handle the PIDs I want. I don't have the experience with it just yet to say if it's me or it yet.
That's like a 9 year old riding that thing. Kid was good. It was a dad and son. And Liam and I were flying. Just happened to be out where we were flying. Never met them before. Super cool people!