This is the most wholesome and kind mechanic video I've ever seen. This is the guy I want walking me through all the crap I broke when I thought I could take it apart and didn't pay attention to where it all goes.

Outstanding

Where is the fuse for these lights? I changed them then it blew my fault but I need to know a the location

This issue of "HYPER FLASH", is exactly why I chose NOT to use LED bulbs for turn signals. I have done my headlights, back up lights, cargo bed lights, and my Fog and or driving lights. I have some LED off road lights that I will be installing on the front of my Pro4X and some additional back up lights and external truck bed lights. Maybe a stop/ turn signal strip that goes under my tailgate.

Im thinking of making the change to LED, will they last longer than regular bulbs? My 2011 Nissan Frontier still has the originals now 13 years old

Thanks

Next time use 2 screwdrivers

you guys never did the resistor installation for these turning led lights

I also had to use a VERY LITTLE amount of O ring lube on my right from headlight bulb. It was getting moisture inside. Been perfect for 5 years now with no issues

I have the 2018 Pro4X. I changed all my lights to LED. worth the effort very well.

Can you replace the entire light without removing the bumper? One of mine caught a rock on the interstate. Still works, but want to replace it

How are you people still so stupid that you don't realize you can't just put an LED bulb into a halogen housing. You jacka$$es are gonna cause accidents.

i changed the bulbs, now interior lights and cargo light doesnt work. I can not figure out witch fuse I need to replace

Does the led headlight go in horizontal or vertical?

nice vid man , just make sure you have nothing important in there as its going to leak like crazy

BEST VIDEO THX

Instructions that we got with it were absolutely useless. Only by watching your video where we able to get this done. 1000 thanks.

Like another guy here, after putting in the main done light all the stopped working.

This was not something I was considering doing but seeing how effective it was, I can't wait to get started.

I swear they made it harder for the 2020 model lol. Thanks for the video

I HAD TO REMOVE AIR BOX AND BATTERY DUE TO MY LARGE HANDS.

I hate these levers on my vfr. Sharp edges don't feel good

What is the kit that u bought again from amazon

Dumb ass! There are four tabs on each corner! There has to be better tutorials

Awesome video thank you!😁

thank you so much for posting video - I was able to change out lights so easy because of you - thank you!!!!!

thanks man

Can you list the bulb numbers I need to do the headlights turn signals and parking lights

Thanks for this video! Saved me about 3 hours!

Where can I purchase those brackets....I have a gator version and those will work

Thank you fort taking the time, that is very helpful.

So i just replaced all three interior lights, and tested each one as i replaced them and all good. The second i put the last light in, the main dome light, now all three lights dont want to turn on. I even put the old bulbs in and still nothing... pls help 😭

What are the other bulbs u are replacing

Awesome thanks

helpful thanks

I don't recommend amazon light bulbs. they are junk. I've got them before and they always burn out very fast.

Just remember to re adjust your headlight angles!

Thanks for all the videos on the Frontier LED upgrade. They were very helpful. Swapped out all except for the dashboard lights. What a major difference in seeing and being seen!

You're not replacing headlights. You're replacing bulbs. Also, you didn't need to buy low beam LED bulbs with resistor. That's only needed for the turn signal bulbs to avoid hyper flash.

These light bulbs have to be 9007 (HB5) For the Nissan Frontier, check your manual before ordering

My ‘96 doesn’t have those two screws. Anyone else have an old Hardbody? Want to hook up trailer lights.

Just replaced my dome light with the Sylvania and now I wanna do the map lights. Much improved!

Can you do one for a nissan frontier 2016 cigarette lighter fues replace for the upper console.

My two-door frontier is built different I think I might need tools 🤷‍♂️

Those are nice I just went with the whole LED housing off Amazon

For some reason i can’t get my housing out of the truck. Any advise on where to pull from to not break the bracket?

Didn’t you do a practice run before videoing?

NO in channel :o/ Im out....

Thanks bro, looks easier than I thought