Good morning, the new radio's hookup wireless. The one I have, you have to hook up with the phone charger. Hope this helps. Don't forget to like and subscribe 😊
Good evening, I might try one eventually. Why do you like the 3020 better? I was looking for a lighter trimmer. Thanks for watching!! Don't forget to like and subscribe 😊
But if yr a certified mechanic & a fire happens to start possibly because yr screen is removed, you may be liable & would be a hefty fine , dont get me wrong i removed mine but as a certified mechanic you are obligated to withhold govt. laws, am i right ?
Good morning, I believe you're right ✅️ . It's probably a liability for you. But for your own equipment It's fine. Thanks for watching!! Don't forget to like and subscribe 😊
Good evening, that's great 👍 I'll definitely put it on the list. Are you thinking about buying one? Thanks for watching!! Don't forget to like and subscribe 😊
@@bakoscustomlawncarellc yes ive been wanting one for years. I used to operate one when I worked for a lawn Care company but now I run my own. Is there another model you would prefer where are you happy with the one you have? How many hours do you have on it. any major repairs so far?
Good morning, I really like the one I have. There are no major repairs at this point. It has just over 1k hours and is still going strong. I'll definitely try and do a review video. Thanks for watching!! Don't forget to like and subscribe
Good morning. Usually, black is your hot . If you don't feel comfortable with wiring. I always say get an electrician. Hope this helps. Don't forget to like and subscribe 😊
Good evening, I'm really enjoying the case. I just bought . It's working way better than stihl oil. Thanks for watching!! Don't forget to like and subscribe 😊
Good evening, tv is still working awesome. The shirt my ex-wife got for me about a year ago. I have seen similar ones on FB. And Amazon. Thanks for watching, and don't forget to like and subscribe 😊
Yep you were absolutely right . The hardest part was digging out a 15mm socket , I used tin snips it came off clean . It works fine now. The whole thing only took a minute!
Good afternoon. Thanks for watching!!! Yup, it doesn't take long, but it makes a huge difference. Also, check into using echo gold oil or red armor oil. It works way better than stihl oil. I have a video on this as well. Also, ethanol free gas. Don't forget to like and subscribe 😀
Hey man....picked up one of these at a garage sale. It runs, but I can't seem to get it to actually push water out. Do you know what the issue might be?
Good evening, so if it got hot, meaning no water, and continued to run. Could have ruined it. If it's primed, it should pump water 💧. Hopefully, this helps. Thanks for watching!!! Don't forget to like and subscribe 😀
Good morning, yup, it's awesome for sure. It actually works really well for us. I like it high on the wall . Thanks for watching. Don't forget to like and subscribe 😀
Good evening. You just need to prime the pump by removing the little plug and filling with water. Then, simply turning it on. Sometimes, it can take 30 seconds to a minute to start building pressure . I always recommend that if you are struggling to install, just hire a professional. These pumps aren't cheap. Thanks again. Don't forget to like and subscribe 😀
Good afternoon, it's super easy. Just add one packet to a one gallon milk jug and fill half to 3/4 full of water. Thanks for watching, and don't forget to like and subscribe 😀
So amazon has the kit . Comes with the bait and the top. I believe my first video has all the info. Just go to my channel. Also, a simple search on Amazon has a few different options. Thanks again
I just bought a Stihl FS 70 R about 3 weeks ago and I hate that thing! It sucks to start, spend like 20 minutes trying to start the damn thing. I had a Craftman which always turns on but broke some parts that do not make anymore. Everyone kept telling me the way to go is Stihl, well it sucks! I am thinking of just returning the thing and getting my $$$$ back and just pay someone to do my lawn service. And I use the Stihl gas and the sales person gave me a 4 yr warranry for free since I bought a 1 gallon of Stihl fuel. But now I have to go and find a Stihl dealer so they can ck it waste time or just return the damn thing??
Good morning, I would probably just return it. Maybe you got a bad unit. Mine starts on the 3rd pull on a cold start, sometimes the second. Stihl fs 70 is a great unit 👌. I would just change yours out for a new one. Hopefully, this helps. Don't forget to like and subscribe 😀
115/230 volt. I believe what they are listed on the box. I ran basically 220 to mine. Make sure you read your specifications on yours. If you don't feel comfortable wiring it you should get an electrician. Hope this helps. Don't forget to like, subscribe, and share 😉
Good morning, I got these at Home Depot. Over in the bracket section. I think it's by the garage organizing brackets. They are fairly cheap and work excellent. Thanks for watching !!! Don't forget to like,subscribe, and share 😊
Can I use a pump like this, but hooked up to hose with a spray nozzle that I can control, or MUST the output end allow constant outflow through something like the sprinklers you have?
Good morning, I am pretty sure you would need a constant flow or a way to shut it off when you stopped spraying. You would probably want a little smaller pump for a single spraying hose as well. Thanks for watching, and don't forget to like,subscribe, and share 😊
Good evening, so when I use the back camera on my phone, everything looks backward. I started using the front camera on all my new videos. I assure you that the handle is on correctly 👍😃 Thank you for watching. Don't forget to like, subscribe, and share.
Good evening, that's awesome. I actually had mine returned and replaced under warranty. The new unit has been working great 👍. I also changed to echo oil. And it works way better. The stihl guy told me the stihl oil is too good and clogs up the exhaust. Thanks for watching don't forget to like and subscribe 😀
@brendaleetv Good evening. You might have gotten a bad one. I would return to the dealer. They have great warranties . Hope this helps. Don't forget to like and subscribe 😀
Thanks for watching. Actually, it is very much used . This is what it looks like when you take care of your equipment 🤣 maybe you're not taking care of your equipment??? Don't forget to like and subscribe 😀
Gotcha, everyone has their own ways of operating. That doesn't mean I'm right, and you're wrong . I was raised old school, keep your tools clean and put away, and they will take care of you. Thanks again for the comments. Hope you have a great day 😀
I bought a FS 70 R 2 yrs ago. It works fine …. when it runs. I use it a couple hours every other week. It had carburetor issues. A carb kit was not available so I replaced it with an Amazon aftermarket clone. Worked great. The clutch started screeching last week. It is a known factory defect. I took it apart, cleaned the clutch, then applied a tiny amount of high temp. grease to the pilot shaft. Sorry guys but I would buy an Echo or Shindawa rather than another Stihl as I own all three. Returning it to the dealer was not an option as they send out all their small engine warranty work with a 6 week turn around.
Good morning. I'm sorry to hear that stihl isn't working out for you. I've also had some warranty issues with them. I would go with whoever has the best support near you. Thanks again for watching, and don't forget to like and subscribe 😀
When it gets dry out...run spark screen. Usually it is not hard to install or uninstall a spark screen. However, my Stihl 440 had a non EPA dual port with opening about 3 times bigger than the US version EPA muffler. Geez, my good old 440 has a regular carb with no tabs on the hi/lol screws..a simple twist on the high screw to richen up after the proper non EPA muffler is installed (that came stock from the Stihl factory on my exact version 440 over in Europe). I did no muffler mod...I simply gave the 440 the less restrictive dual port muffler it was designed for as and removed the spark screens (which are highly restrictive when new and clean and downright block your exhaust when inevitably the screen carbons up). I have had a new Stihl chainsaw start acting up while commercially logging...it was a clogged spark screen and so I removed it. That was a decade ago and the Stihl chainsaw has run fine for over a decade with no fires...imagine that! I think back in the 60s and 70s the chainsaws had mufflers on the sides that were great fire starters and spark screens might have helped. My Stihl 440 has deflectors near the exhaust ports and basically there is little to no chance of a spark making it out. However in dry conditions (I like sawing it the cool air...below 40 and down to below zero) so both me and my saw keep cool and the ground is frozen and Rock hard. To the snow ends my woods sawing but there is always some firewood needing bucking in the yard. The spark screen is good to prevent snow from burning lol. Git her done!
Good morning. Great information. I think the spark arrestors really don't work. Except for clogging the exhaust port. I think it makes them feel better 🤣. Thanks for watching, and don't forget to like and subscribe 😀
That’s exactly the tv I’m wanting to buy in a few weeks. Thankfully I have a large table and no mounting to wall like you did. Excellent job. Thanks again and will continue to follow
Good afternoon, for light all day trimming fs 70r is better because it's a lot lighter. The 91r is great for heavy, thick stuff . I use them both just for different reasons. I appreciate you watching, and don't forget to like and subscribe 😀
I removed the screens from 2 machines, a blower and a trimmer, and found pliers worked great; just grab and rip, cleanly removed all the wire with no strands left behind
Good morning. Sorry about that . I usually do. I think my battery in my mic died shortly after starting the video. Thanks for watching, and don't forget to like and subscribe.
Do use only kosher oil? I was told that oil has special formula because the walkers are air cooled so the oil helps keep the temperature lower than say other synthetic oil.
Thanks for watching!!! I did get the oil from the walker dealer along with the other parts. I think it's a synthetic blend 🤔. Don't forget to like and subscribe 😀
Good morning . Sometimes, it is the video. It looks backwards. But if you are talking about the foot valve pipe that is sucking the water. I am pretty sure it's that way because it's upside-down. Confusing, i know . 😆
Good morning. They have these marked very poorly for the wiring. If you go to my channel, I posted some up close pictures of the wiring . This should help. I am not an electrician, so. Black is usually hot and white neutral. If i am correct, wiring it backward would just make the pump run backward. Basically, it's not pumping any water . Check out those pictures it should help you out. If you don't feel comfortable, get an electrician . Thanks for watching, and don't forget to like and subscribe 😀
Good evening, I used my old mount. I was going to move it down, but I actually like it better . Especially for gaming and movies. Thanks for watching. Don't forget to like and subscribe 😀
Good morning, so it's in the video. I also had a time finding it. Just below the seat where the kids' legs hang down. You should see a little yellow sticker. Hope this helps. Thanks for watching. Don't forget to like and subscribe 😀
Good morning. Yes, I used the AI, but I am not listening to music. That being said, hopefully, it will start to learn and get better. If not, the manual option is always available . I appreciate you watching. Don't forget to like and subscribe 😀