Salut, et merci pour tes videos. Y a juste un truc que je vois pas, c'est comment utiliser le tap tempo de la Maestro avec l'Aeros en maitre et la BB qui suit. Tu l'as peut-être déjà fait dans un custom ? Je trouve ça lourd d'aller dans la config de l'Aeros pour rentrer le tempo avec la tirette. Tu fais comment, toi ?
Oui, c'est ce que je fais toujours . Si ton branchement est fait correctement tu dois introduire la commande CC 117 Valeur 127 sur un bouton de la Maestro. that's it
Bonjour à toi et merci pour cette vidéo. Je tente de faire la même chose mais sans succès, je m'explique : Je suis en version 2.6 mais quand je fais la même opération ça ne matche pas en tout cas ça ne sauvegarde pas la 2ème scène sur le même footswitch. Si par exemple je fais une scène 2 avec un drive et un clean en scène 1 j'ai bien comme toi le petit 1 et 2. 1 en clean ok je let off tout ce que je ne veux pas et 2 je met en On ce que je veux, j'attribue une couleur en 1 et 2. Par contre ceci ne change rien si j'appuie sur le footswitch je reste en scène 1 même en sauvegardant tout. Je ne comprends pas du coup. Merci pour ton aide.
Je crois savoir ton probleme, lorsque tu fais la scene 1 , pousse une fois le switch (celui ou est attribué la scène 1) puis fait pareil pour la scene 2, Mais tu revviens sur la scene 1 pour la remodifier . j'ai plus le MX5 mais c'est pareil pour le Core. Si tu fais la scene 1 puis la scene 2 comme tu devrais logiquement cela te remet les "non assign". Fau refaire la 1 après que tu as fait la 2 et confirmer en appuyant sur le switch après chaque scene. regarde bien a partir de 1.07 , je reviens sur la scene 1
Much appreciated, mon ami. Don't apologize for your perceived English skills. They are just fine. Merci pour tout. If you have a map for midi maestro to share that would be great. Being old with poor eyesight, I have midi maestro on the floor and looper on mike stand. I learned and am still learning primarily through your generosity. Merci encore.
Thank you, Do you mean a custom for the MM ? Search for " Steve Special" on the " browse custom mode" into the app . This is what I use all the time . There is a Headrush section but you can replace this on your own taste. The Aeros need to be Master with this custom . The first page of this custom is to record after recording you can switch to the mode you want . If you have any question, just shoot !
@@ForFunGuitar Merci Steve. I was wondering how the BB was changing during your demo. I had a Boomerang for the longest time, really easy to use with sidecar for extra buttons. Aeros is finally getting there, where I feel I can use it without trying to keep an eye on little spinning graphics and all that is on display. You really have opened it up for me. Merci encore, mon ami. Bon travail!
@@baldwinjjj Thank you, this is another way to record, with the mixer screen, it's a kind like boomerang, Infinity etc.. just the feeling, no waveform and you can mix immediately ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CxTgjKJShLA.html . You can do a lot with this looper don't hesitate if you have any questions, or need to ask something
Thank you. This is very helpful! Have you tried triggering program changes on the Core with MIDI? I'm having a hard time finding examples of how to set it up correctly.
If you mean call rigs with midi you can take a look here it's the same way (go to 6.25 on the video to have it with my bad english ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3LCpsttxGOY.html
J'ai eu des boîtes a rythme style Alesis, Boss DR 3, 670, 880 et ceux la font vraiment des sons très "synthétiques" La BB est de loin la meilleur en son, on peut via le logiciel modifier la vélocité de chaque frappe et son se qui la rend plus humain
try this link, I still rename the file , this is the 5.2.0 beta , just drag and drop(the file alone NOT THE FOLDER) on your Sdcard and reboot mega.nz/folder/nBpymKYC#hUOIzQZxAt-5I-TOLBX-YA Cheers
Merci, je vous signale qu'il y a un nouveau Beatbuddy Manager sorti recemment, regarder içi ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_yI05pi6Xiw.html. Cordialement
Hi, Mr. Sebastian. I really appreciate your videos. I was able to get this to work in both Aeros and BB mode, but, while I was able to get the parts to change, when I stopped the Aeros the BB kept going. I could stop the BB with my foot pedal, but then when I restarted the Aeros, that did not restart the BB. Any suggestions on this in terms of settings on the BB or Aeros? Or should I just buckle down and do it all in Custom? Thanks. Tom
Hello; you need to set the Aeros as master, then navigate to Settings>Midi> Midi out scroll and enable start and outro. In this case , to start a recording with the beatbuddy, just press the record switch of the Aeros. you can stop both , just to press the Start/Stop of the Aeros, You can start Both to press the start/Stop switch of the Aeros
Je viens de recevoir le mien. testé sur un smartphone samsung s10 . qualités du son moyenne notamment les basses. qualités de la finition décevante en vu du prix d'achat. ce casque ne vaut pas plus de 90 euro! ( version pro x)
Si c'est pour écouter de la musique sur smartphone, chaîne hifi, téléviseur, ne jamais prendre un casque de plus de 32 Ohms , Au dessus de 32 ohms c'est plus pour les musiciens
Enfin une façon simple et rapide de créer des rythmes sur le BB! Le programme est neuf, il sera surement mis à jours ces prochaines semaines. Merci pour le partage
Bonjour et merci pour toutes ces vidéos sur les produits Singular Sound et connexes. Pour le calibrage des 2 pédales Hotone press (je les aime beaucoup) pour inverser la polarité et affiner la course il suffit de valider la valeur maximum au minimum et la valeur minimum au maximum. Bonne astuce non ? En revanche, pourquoi je n’ai pas l’option Behavior dans le setting Pedal alors que l’Aeros est à jour ? Une idée ? C’est une des améliorations de La V5.2 beta ? 🤔
Oui pour la Hotone press faut inverser les parametres. Tu n'as pas "Behavior" ?? bizarre ça ,normalement elle doit y être, du moins chez moi elle est présente. Regarde bien que tu vas d'abord dans "Settings" puis tu devrais la voir. Si pas reflash le looper
Great video thanks! Just want to ask have you tried having quantise on ? I want to play backing tracks but record loops on top but worry it will go out of time if the loops in free form ? Thanks again buddy 👍
Hello, so far I remember I tried with quantize on, but then you need to adjust the right tempo (with the tap or the slide when create a song) , you need to know the right tempo of the backing track. But this was on previous version, I never tray again with the 5.2. Gonna check this soon
@@norrinradd1979 I read the change log of the last update, and normaly must be working Backing Track Import Expansion Backing tracks are supported in all Song Grid Modes (Auto, Freeform, Quantized) and also when the Sync Tracks song setting is enabled. How to get backing tracks onto the Aeros using the SD card After updating to 5.0.x, 5.1.x, or 5.2.x, the SD card will have a new folder on it called “backingtracks”. If the folder is not there, insert the SD card into the Aeros while powered off and boot the Aeros up, this will generate the folder. If you have not converted from pre 5.x.x format, you must convert your SD files, the Aeros will prompt you to convert if they are not already converted. Read more here. Add your backing tracks files to the “backingtracks” folder using your computer. The Aeros will only support .WAV (PCM) files that are 44.1kHz and 24bit. They can be mono or stereo.
Do you know how to set the tempo of the loop? Not the global tempo? Trying to set the loop tempo for the metronome click and have it saved when I bring up saved loops
To be honest I don't know but in the manual there is only this Global Tempo Sync: Set this parameter to On to set the Looper to sync to HeadRush Core’s Global Tempo. This is the same tempo used for any effects that are set to “Sync,” as well as the Metronome feature. Set this parameter to Off to desync the Looper tempo from the global tempo. • Global Tempo: Use this parameter to manually set the global tempo of HeadRush Core using the main encoder. You can alternately set this tempo by using the tap tempo footswitch
Encore une très bonne vidéo bon moi je n'ai pas l'utilité avec le prime quoi que bon c'est pas le tout mais tout ça ça m'a donné soif moi aussi à bientôt l'ami
Salut l'ami Bon, Eh bien, j'ai vérifié sur mon prime. Mais non, je n'ai aucun souci. Je peux même faire le tour avec ça ne bouge pas d'un tour. Et je dirais même plutôt assez précis. J'ai en effet la version 3 .1. 2
@@ForFunGuitar Non, il n'y a pas de couleur verte Et il est parfois très dur de rester bien au milieu. En effet, il oscille entre le moin et le plus. En particulier sur les grosses cordes Sur les 3 dernières cordes Les plus fines C'est assez précis
Hey, I've been trying to do the flash memory to my JTV-69 but when I open the Line 6 Monkey I don't see the flass memory there do you know what can I do about it?
Probably the guitar is not recognized . Check of the volume is full open and you have a jack plugged in ,with the RJ 45 ! You can insert the jack and RJ4( and open the Workbench HD to see if the guitar is recognized or not. you need WORBENCH HD