With the adventure of life, comes new people and places. What a great way to share experiences, through videos online. My name is Brian Bailey, and I started editing in November of 2015 using a program called Adobe Premiere Pro. I then began this creative opportunity with just a few tools, a Gopro camera and my laptop. On my channel you will find many life experiences in a variety of subjects across the board. I hope you enjoy watching this channel, and it's unique videos. Have a great day and God Bless You!
I thought the Hyatt had its own shuttle bus...are you saying you take the Airport shuttle bus to Terminal 2 and then it goes on to the Hyatt? Please advise. Thanks
@bb's life whats a good glue/adhesive or contact cement to use in hot climate to stick new vinyl over dash board vinyl im having bad luck with landau upholstery adhesive what would you use?
Hello and nice to meet you virtually Sir Michael. Thanks for watching BB's Life. The two contact cements I've used as a spray adhesive with a nice finish were "WELD & 3M" both offer products that hold well. When using WELD for a spray glue gun you might have to thin the glue with Toluene, Ethyl Acetate or Methylene Chloride. Vinyl is usually a bit thicker and selecting the stongest adhesive could help with hotter tempatures. I like a 2.0 tip in the glue gun with a stringy layout when spraying. Also, apply glue to both pieces of material and let it dry some before sticking the two together. I hope this helps you out with a nice longlasting finish in higher heat.
Would this work for vinyl leather? I’m trying to recreate bike pads that go over a bike frame. Think of a children’s bike. I have LV vinyl leather material and I was curious if I’d stick to foam?
Hello and thank you for watching BB's Life, my name is Brian. Depending on the surface of the foam pad. If the pad shows a gloss or shines, it might have difficulty sticking. That's why they usually use velcro to attach the material. But, if you can scuff or sand the shine down, it will help with sticking the two materiala together. Be sure to spray the glue on both parts, the LV vinly and Pad, allowing drying time before applying the two together. To answer the question directly (Yes) the two pieces being used should stick with 3M Strong hold spray glue. Have a good day!
그것은 무료입니다! 가신다면 이비스 스타일 앰배서더 인천공항, 그랜드 하얏트 인천, 파라다이스 시티라고도 불리는 파라다이스 호텔 앤 리조트를 방문해 보세요. 또한 그랜드 하얏트 인천 바로 앞에서 승하차하는 무료 셔틀버스도 제공하고 있습니다. 시청해 주셔서 감사합니다. 좋은 하루 되세요.
Hello Yunseo! It was great meeting you and your family before the flight. Thank you for being so kind and offering a gift while I wait in the Airport. I hope you enjoy drawing in your new "Drawing Book" and continue as a growing Artist. I was surprised when you asked me to draw, but I did enjoy creating an anime with ya! Were an Artist Team :) Have a safe flight and enjoy the rest of the week. I wish you and your family the best!
Hello and nice to meet you virtually, and thanks for watching. The digital video media chandelier continuously revolves around the clock and is close to the Arena. Yes, the free shuttle bus goes in both directions to and from the Resort and Airport. I hope you get the opportunity to see it in person. Have a good day!
We will have a trip to Seoul this April and plan to visit the Inspire Entertainment Resort, too. Your video is too helpful. Thank you. Is the shuttle bus allowed to carry the big luggage (20kg) because we plan to take the free shuttle bus from the resort straight to Myeongdong station as well?
Hello and thank you for watching! Love the fans is what the good book says! When I cruisin the bus I only had a backpack, but I saw a number of passengers with oversized luggage being stored under the tour bus in the compartment areas. I hope this helps. I believe they will carry it for you. The bus had extra space ever time I was on it, and the driver, including other staff members were overly polite and accommadating while on the commercial property.
Thank you. I would like to inquire if there is any course on how to design such books in Japanese, and is the Japanese market good on Amazon (amazon kdp in general)?
Hello and nice to meet you virtually, my name is Brian. Thank you for taking the time to view this video posted on RU-vid. I'm new to the Japanese Market Place with Amazon KDP Publishing. From what I understand when reading the information provided by KDP Publishing. Depending on how you decided to publish the content materials in the manuscript being published with KDP Publishing will make a difference if it will be published or sold in certain countries outside of the United States. Over the next few months I'll be working with a Japanese translator looking to create youth learning books, and educational drawing books in a variety of prints that include standard color, premium color and also black & white, which are the options offered by KDP Publishing. This an experiment to find how and where these books will be sold around the world. According to the manuscript content color chosen and how it is published. I have some experience publishing while I was attending college and would be glad to offer any assistance to help with designs and software programs that I've used to help with creating book cover, manuscripts and images or picture detail. Programs are: Canva, BeFunky, Microsoft Office 365, Word, www.ilovepdf.com/ docupub.com/pdfresize/ I hope this answers most of your questions. If there is anything else I can assist with please let me know and I'll do my best at finding the answer or can possibly create a video with descriptions. Have a great day! Respectfully, Brian
@@BBsLIFE Thank you so much Mr. Brian that's really helpful and I get so many useful information, My name is Mohamed, What I understood from your words is that even if we design a book in Japanese, there will be an opportunity to sell it in other countries and this depends on the type of manuscript you wanna publishing. And I hope u can share with us the result of the exprimant u wanna did. best regards Mohamed Orav
Thank you for the reply Mr. Mohamed. I don't know of any courses to create your own books, but I'm glad to offer any knowledge I have at no cost. If your able to ask what it is your trying to accomplish? Yes, I'll also be glad to share after the experiment is complete on which manuscripts are published and in what countries as KDP Publishing shares the details after submitting each book for publishing. If, you don't hear from me in the next 30 to 45 days, please check-in with an email and ask if there are any updates on the Japanese manuscript and I'll share where it's at. Have a great day! Respectfully, Brian
Hello and nice to meet you virtually, my name is Brian. When using indoor / outdoor carpet with a rubber coating on the bottom, it holds best when the glue is applied with a brush or roller on both the carpet bottom and surface that it's being applied too. Applying extra glue when used in the marine industry is normal, but before applying the carpet to its surface area the wait time is longer allowing the glue to become tacky or close to dry to the touch. Then apply the two together for a strong bond. Try not to peel the carpet up once its applied or the glue might only be on one surface area. Have a nice day and Good Luck!
長崎海浜公園で踊る新しいミュージックビデオです。楽しんでご覧いただければ幸いです。 長崎海浜公園 - 雨の中のサングラス (Music Video) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zU2OIy2UKts.html This is a new music video, where you are dancing at Nagasaki Seaside Park. I hope you enjoy watching. Nagasaki Seaside Park - Sunglasses in the Rain (Music Video) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zU2OIy2UKts.html
When spraying the glue should I wait a couple minutes before applying the fabric ? I’m doing all my pillars and headliner In suede. It’ll be my first time as well so I’m trying to do research before doing it. TIA
Thanks for watching. When using suede be sure not to shoot the glue at close range or use to much glue, it tends to bleed through the fabric and glues the suede in one place. I suggest a 12 to 16 inch distance when laying the glue and very stringing almost dry in the air before landing on the suede. I hope it works out and Good Luck. Here`s a video with a headliner: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NrAiSSIZV7Q.html
Yes, usually I wait according to how tacky the glue is on the material. Touch it on the edges with your finger and if it feels wet than wait longer. If, it stays on the material and feels dry than its ready to apply. Be sure to apply on both the material and item being covered. I hope it works out for you. Respectfully, Brian
Nice to meet you virtually, Brian. If you haven't already applied it, be sure to apply the glue on each side before application. Meaning spray the product being used on one side of the new headliner material. Then apply a coat of glue to the molded shell. Allow the glue to become tacky before sticking the two pieces together. That product usually lasts a couple of years for a headliner, if your automobile is not in constant warm or hot weather. If your automobile is in the heat, it's best to use a professional spray glue gun, that runs off compressed air with the commercial grade 3M contact cement. I hope it all works out, have a great day! Here's a link to what I'm talking about. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NrAiSSIZV7Q.html
Thanks, for the laughs! We could all use a professional lift. Sometimes you just do what you got do. I appreciate you watching the video. Respectfully, Brian
Hello, and thanks for writing. I'm an independent videographer, and college student who happened to be in the area when this was taking place on campus.
