Welcome to the automotive channel, with tips related to cars. We start with the location of fuse boxes, the OBD / OBD2 diagnostic port, but the channel will gradually develop. Check back here from time to time. See what's new! ***************************************************** Subscribe to the channel so you don't miss anything.
================= Cooperation: Email address only for cooperation purposes. I do not provide advice via e-mail.
This Fiat does not have a factory OBD2 (16 pins) under the steering wheel, so you need to connect via the 3-pin input on the right side under the hood. You need a 3 pin to 16 pin OBD2 connector. Older Fiat models did not always have an OBD2 connector
Hi I have a 2022 Dacia Sandero, the front wipers have stopped working and I think it's a fuse but the manual and the diagram on the inside fusebox panel give no information on where the front wiper's fuse is. Are you able to tell me?
I don't see any link for error reading device.which one do you recommend? What I have is Elm327mini obd adaptor that use with android cell phone but i don't think it gets right error code.
Anyone know if in 1.6 Auto, if you turn ignition key to radio on and push brake & accelerator pedal down together it will give you last fault code recorded on mileage screen? + If there is 'test' setting via infotainment that will tell you engine temp etc?
Hi! Thank you SO much for this vid, I'm trying to find the port on my 06 Sorento and no one shows it. I assume the port is located in the same spot for the Sorento's 02 thru 09? I just bought a MotoPower scanner and am hoping it's compatible.
Hi, I have the same car, but the obd port is missing from there. Is there any case that they have moved it to somewhere else ? How can I find it ? I have actually the 1.2 Ecoflex 2012 version with 95Hp. I don't know which version do you have.
True, his Seicento does not have an OBD2 input, but he showed where this connector should be. However, all you need to do is buy a 3-pin OBD2 connector and under the hood on the right side there is an ECU controller to which we connect the converter and then the OBD2 cable.