What’s up everyone!!! Welcome to my channel, my name is JERRY, what I do on my channel is, I buy mods for my 2010 Mazdaspeed 3 to show you guys what I got and how to put it on, also I have a 2006 G35 coupe that will be on the channel too, I do un boxings of the items that I get, my videos are mainly entertainment, so if you are following my videos on how to put an item on your doing it on your own risk, I am not responsible if you messed up or break something, Also please don’t forget to subscribe and leave a like on the video, also don’t forget to ring that bell to never miss my car videos! Leave a comment on what you guys think of the videos or if you have questions, I try to answer every question you guys have thanks for watching
@@electriccherry6090 any Cobb parts is good I say it’s better then Corksport, good thing about Cobb the turbo inlet, the air box , front mount, the BPV is carb legal, so it can pass smog with the parts on it, they even send you the sticker when buying the parts,
thanks for your video , my car doesnt hold pressure when ignition on , it drop to 75 psi in 30 minutes , in 4 min it drop to 184 , when i am driving i drop gas desire 291 to go to idle speed but actual stay 800 - 900 psi , is it pressure relief valve
@@waresgarage8590 bottom i cant fit an impact bc the downpipe is in the way. do i need to take that L bracket off at all if the one connecting to the turbo is off?
@@waresgarage8590 yeah. i got the bolt on the top of the bracket and the one on the side further from the exhaust but the 3rd one is stuck on there pretty good and i have zero leverage. the bolt connected to turbo is off so hypothetically i dont need to take the bracket off right?
@@ZoomingWrenches I think I remember i did a long extensions with a wobble, once you can that off you can just move the down pipe don’t have to take it off or noting
I apreciate the information my 2011 speed3 had the same issues I did exactly what you replace and fixed the problem however, I never got the error code in my car. before I replaced the fan control module my car fan kept running even when the engine was off .
No I don’t I get it from mazda dealer ship edgeautosport.com/mazda-oem-thermostat-housing-mazdaspeed-3-2007-2013-mazdaspeed-6-2006-2007/?gad_source=1&gclid=EAIaIQobChMIsabrm-CHhwMVt4BaBR2lLAQMEAQYASABEgIl1vD_BwE
I have same issue on customers car changed caliper..lines and still lights and brakes locking up front wheel. I hope this helps. Where are those fuses at?
So check the abs fuse it’s the big one it’s like taking three spots check that one the other one is inside car supposedly is the stop lamp one check that fuse , if good it could be the speed sensor or the wheel bearing it has the magnet those can go back causing the ABS light,
That shit gave out in like two days, so idk if it was a faulty switch or my fan is out and it’s shorting it out, im going to make an video once I get the fan, I recommend just buying the whole fan with the switch on it
@waresgarage8590 thanks for responding. I havent heard of much success with manybof these replacements. Thanks for trying and sharing. Helps to narrow down solutions for everyone! I am going to the local pick and pull. If that doesn't work, probably just going to wire in a switch till a solution can be found
thanks brotha. once i get the other socket it will look even better G35 slowly getting there, just fixing a few things so it can be ready for the street
@@waresgarage8590 thanks for responding brother. VA here, just got a 23 390 couple weeks ago. I fell in love with Akrapovič exhaust but the price is a bit out of reach for me right now so probably gonna order this. Or maybe see if my local muffler shop could replicate it at a MUCH lower price, tho welds probably wont be near as pretty.. Also do you still have your bike?
@@xDoss np brotha. hell yea thanks for watching bro, oo nice a 2023 duke im thinking about getting a bike again, i want an super duke but that shit to much power lol, yea the little exhaust is Titanium the sound it made when i had it on was dope, Titanium is pricey
just leave the gasket on no need to take it off if you put the RTV on, if you buy it new .you dont have to worry about the RTV. mine was use and it didnt work right think mine was warped, so the guy let me give it back and i ended up getting the 75 mm spacer and throttle body off him
Replace the one in the the front of the car if not do a smoke test to see if there’s a leak, I replace the one I showed in the video, it didn’t fix my problem, the next step it’s the one in the front but I noice when I get gas it clicks right away meaning the charcoal canister is bad and I noticed coming in from the charcoal canister a little bit so think that’s my problem there
i have not gotten it yet im sure autozone or oreillys will have it if not ill have to get it online just haven't gotten the time to look lol ill make a video once i get it
The music I can understand I’m working on that but, but I showed what to take off to get the stock one off and I showed putting on the new one and where the nuts go, and I showed what the finish product looked,
It had holes or it was warped because it was losing a lot of air causing the car not to stay on, they I gave it back and got the 75mm throttle body and spacer instead
Crankshaft position sensor kept failing had to replace the thermostat and the cps fixed my problem oh yeah and the water pump got replaced no more overheating
Did you run into fitment issues with the install? It looks like you had to bend some of the heat shielding towards the back of the car? Thanks for sharing the video.
I don’t even remember bending anything probably already like that, but no fitment issues it’s right up, I just recommend if your running the stock hanger bushing get new ones