On this channel I will bring to you reviews, how to videos, deals for tools and even some adventure. I work a lot of hours, but I will do my best to bring new videos to the channel. Feel free to leave comments and even share my videos and the channel. Thanks and have a great blessed day.
@trumanhw, this is the Original 8750. I bought this in 2020 the 8750 inverter wasn't out yet I don't think. And they have the regular Inverter Generator and then the Super Quiet Inverter Generator.
@jimworkman6901, where is it going in reverse at? If you look when it starts it forward. But while it's going your eyes will play tricks on you. However, to start the circle it may have been in reverse. 😀
Maybe you could help me here also. i have hard start and car is dying while running for sometime. for hard start i sometimes have to put key to on position for about 4-5 minutes and by that it starts one click. anything lesser that that it wont start and only crank. also while running its just dies quickly just like that, sometimes within 30 minutes or sometimes longer. since im no mechanic what i did was to replace some of the parts, fuel pump, fuel injector, spark plug, ignition coil, idle air control valve, throttle position sensor, crankshaft sensor, camshaft sensor, but still the same problem, any clue or suggestion? my last suspect could be fuel pressure regulator or ecu
@rafaelmaueljr, I wouldn't even know. I feel like if you've had your vehicle in the shop to get all that fixed, the mechanic(s) should have been able to find the problem 😕.
@msmeganmole, thanks and you're welcome. So it's crazy, it's been exactly 3yrs today since I did the video and the tint. The tint has held up as far as not peeling. But the tint has started fading and not being as dark. Which is completely understandable. Wife and I were talking about buying some better and even darker tint and doing it over.
@DoyleShadduck, I did that as well. It was the circuit board that needed to be rebuilt. I have another video where I had that done. The link to that video is in the comments.
@Djguero2010 this is what I bought from Lowe's. However I'm gonna give you an Amazon link after this that will help even more. www.lowes.com/pd/Shop-Vac-2Pk-Large-Cartridge-Filter/5013192283
@djguero2010 after you buy your new filter, but these. Well look for the size that fits your vacuum. This will save you from buying filters. Hope this links I sent you are helpful. 12 Pack VF2005 Type F/I/J Replacement 90662 90672 CMXZVBE38768 Vacuum Dust Filter Bags Compatible with Shop Vac CRAFTSMAN 10-14 Gallon Wet Dry Vacuum a.co/d/2ff9Nq6
#UbberMapper yes after doing this method over time the threads finally I guess wore out. I'd do this to change tires and to lift my riding mower up. So yea, I don't recommend this method.. lol..
@rothenbj, yes I ran it for 18 hours and filled up while running. I know thats not recommended, but that's what I did. I'm not sure if our 5 ton AC unit was during that time. But this Generator is a BEAST for the price and durability.
@jesse197981, you're correct, I just wanted to see if it could do it. Once I bought a bigger battery I was able to do it to my 98 Chevy. Yes an impact wrench is the correct tool for the job tho.
@shawnphillips1220, I bought them from my job. We're a major manufacturing moulding company. But you can buy these boards from Lowe's and home Depot. These particular boards are MDF.
@@DIYRAYMOND I bought some Arauco radiata pine shiplap from Home Depot. I specifically wanted tongue and groove nicklegap so I could hide the nail holes but couldn't find any fir the life of me so I just went with shiplap. I'm going to try to use a 23ga pin nailer and construction adhesive so I don't have to fill everything but if the pin nails fail to go through the boards and hold them then I will use my 16ga nailer and fill the holes after their installed.
Nice video thanks for sharing do you have a soft start on that AC I have the predator 9500 inverter generator and it trips my breaker on that 30 amp I am Learning all this the hard way and it’s getting expensive I am going to get a micro air soft start for my 5 ton ac and researching it still won’t run it so I’m gonna have to parallel 2 9500 or get a bigger inverter wit a 50 amp output plug what’s got me confused is if you have a 240v 30 amp out plug on generator is 31 amp draw gonna trip it? I had electrician come out and set me up for my generator he set a 200amp transfer switch and 3O amp interlock like I said this is getting expensive I should have got the generac whole house set up live and learn I guess
@southernoutdoors1862, idk if it has a soft start. It's whatever came with our mobile home when we bought the package. My unit calls for a minimum of 40amp breaker. I have a 50 or 60 amp on it. And my cord from generator to house is a 50amp cord. Now when I powered my AC unit, I had ALL BREAKERS OFF. So only my AC was getting power. Only ran AC for maybe an hour or 2 at a time. I feel like your 9500 should be able to do it as well. Just be sure to have ALL other breakers OFF.
@bobbydavis2757, I'm not sure. I don't think it did any clicking....🤔... And I don't think this was the only problem. After I changed this cord my truck sometimes still doesn't crank and I have to drop it to Neutral to crank it. Then sometimes put back to park to crank it.
I have watched several of these videos and people say to pull up the tabs. No one mentions that you have to push the tabs back to release the indentations on the front of the tabs and then pull them up!
@mechanicalman8048, it wasn't the fuel pump. It was the circuit board that is located on the passenger side floor area. I have a video about the company who fixed it. It's actually a common problem for the relay circuit to go out.
@@mechanicalman8048 here is the link below if you haven't watched it yet. I was a little skeptical, but they did an amazing job. I'm not sure if I put a link in the description for that video, but you can look them up on Google. That was how I originally found them. Hope these videos help you fix your problem.. if you have one with your vehicle. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8Luj_s1ccJE.htmlsi=u7FmYqlMNLEY0JD0
I made a video of my 2003 ford expedition replacing connectors & lugs save alot of money 💰 🤑 💸 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--gOeAaByP0M.htmlsi=llJSPKBtkGKb8_5x
Hey there my 2004 Ford expedition 5.4L is also doing the exact same. Doesn’t start and dies out when it does. I already changed the gas pump, and four ignition coils/spark plugs. Three from the passenger’s side and the first one on the drivers side in the front. If you could help that would be great!!🙏🏽
@__TrueXotics__ click the link I sent you. This may help you. This is what got my truck fixed. This is another video on my channel. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8Luj_s1ccJE.html
@sandman7849 yes sir. The oil is pretty easy to change on it. Also it's good to add some fuel injector fluid with the gas as well to help keep the carburetor/ injectors clean.
@alfredacaudle3374, doesn't take long. Maybe like 7 minutes if already thawed. I use this for just about everything. Re-heating grilled food is really good in here.
Wow that was a fast reply thank you.I’m new to this air fryer only had it a couple days.so far I made pizza with baguette bread and today made tater tots but, think I did the tots to long the pizza bread was awesome.tomorrow I brought out chicken wings hope that turns out.
@Alfrefacuadle3374, yes with this air fryer the food you can cook in it is just about endless. The other week I cooked frozen raw boneless chicken breast. I use this more than my microwave. You will love it.
@@DIYRAYMOND I can’t wait to find more recipes,one more question have you used those parchment paper liners?I want as little cleaning as possible.what size if you do. Sorry I keep bothering. You.
Hole saws can shred wrists. If you’re going to do heavier duty DIY, they make drills with anti-kickback now within the M12 price level. Side handle would be a minimum for me.
Yea this generator is a beast. I was happy to finally use it, for the house. I use it daily for my Mobile Detailing Business. But I'm very pleased with this Generator.
Dont understand what that wiring is for that you didn't hook up in the video. Is that for the strip of lights you mentioned and what is their purpose? Thanks.
@edhiestand1197 that wire is for that strip of lights. I didn't hook it up because my pastor said it will be ok that he really wasn't worried about that. They're more of a running/ parking light.
Smart move for the parade to have "Pooper Scooper Troops" (well, just that one guy with the wheelbarrow and shovel) to clean up that horse poop. They need to have them sort of workers at the Strawberry Festival parade in Albion, NY. In 1997, I went to a Strawberry Festival parade with my parents, mostly since my older sister was in the marching band, and she performed as part of the marching band. Well, there were horses in the parade, and as they were taking a trot down the street where the parade took place, I guess the horses decided to unload their bowels on the road. And here's the worst part: there were ambulances for COVA in the parade that had to drive in that poop. Looking back on that memory, I feel bad for that ambulance drivers who had to drive through the horse manure. I was 11 years old at the time I witnessed this blooper in a parade. I'm now 38, and strangely that memory came back to me some years ago.
I have done this to my wife's expidition it's a good short term fix it works but the corrosion becomes much worse I find myself cleaning the corrosion at least once a month dorman makes a terminal that works great for under 30 bucks for a complete job
Do you turn the ratchet clock wise or counter clock wise to remove and it it based on siting on it and riding it? Another words is it righty righty lefty loose???
@Heavy69Metal I would assume Right tighty Lefty Loosie. But I just use my impact. But if you don't have an impact, then when you change your blades you'll need to put a board to lock the blade from moving.
