I have 8 stairs. I use ports #1 to 8. After on week port #6 stop working. So, I skipped this faulty port and reconfigured the stairs wire to use port #1-#2-#3-#4-#5-skip-#7-#8-#9. Two week after port #7 stop working!!!! I did the same thing reconfigured ports #1-#2-#3-#4-#5-skip-skip--#8-#9-#10. Now the problem is when you reconfigured your stairs, port #6 - #7 create a delay between ports #5 and #8?
Hello, Are you able to help me with the ES32 stair controller setup? I have connected all steps to the controller + light and 2 PIR sensors. Steps are turning ON and OFF one-by-one as expected. The problem I have is when I go up, the sensor at the bottom initiates the sequence...but when I'm at the top, the upper PIR sensor initiates the sequence from top to down. Is it possible to set any delay or something? Because currently it looks like a mess, stairs from the top are turning OFF, but at the same time, they are turned ON from the top... I tried many combinations and nothing helped, but that's my first time with this controller
Hi! the first led tape how is the name of that ? This ledtape goes straight like star not the others . how will I find them, what are the names of this type of led thanks.
coxotech.com/product/es32-stair-light-controller/ Hello, you can enter our website through this link to send an inquiry form, and we will have a salesperson reply to you. Thank you.
Hello, this power supply is COXO's 12V/24V constant voltage power supply, you can enter our website(coxotech.com/accessories/) to browse product information related to power supply or controller.
W = VI, so for say strip of 2W per foot , will give you the total wattage depending on the number add them together and multiply by 1.2, that is a good beginning. White only light will take about 50Watts for 8 steps (approximation), the current min should be about 5 Amps. Hope this helps some. If more than 10 steps I would recommend two power supplies and NOT a single BIG power supply (safety and regulations. 150 Watts and 24 VDC (or 12 VDC) may generate too much current and not be within specifications for residential homes.
ah, COB sure its best to instal on motorbike for its flexibelity. but its still dont have variation in rgb with remote/apk light led pcb ws2812b isn't ?