I don't agree with what you are saying based on my direct experience with it. I have Purple Martin Bird houses that have PETG Perches and Doors that I printed and put into place 3 years ago in Mission Texas. Full sun and high heat. I also have things outside in Iowa where I have extreme cold and heat / humidity. No signs of this breaking down after years in service. We also make antenna insulators that are on towers without any failures.
Not sure that I agree with what you are saying. I just notice my flight times are pretty good until I kick the light on high and I can literally watch my flight minutes drop faster.
That one was just to say you can do it... I do mix infills all the time to reinforce different areas of a print without issue. for example , if I print a figurine, the arms I will increase infill at shoulder to strengthen the print. Works for me!
hi, my liftmaster does the same thing like the motor runs but the gate don't open and when i unplug it and put it back on it works fine .what you think that can be.?
I would check the limit switches for continuity and function. By doing a power cycle I think you are having the logic reset but the micro switch is still not operating correctly. IMO
Fun fact - turtles return to where they were hatched to lay their own eggs. Ever see a turtle heading way across town and wonder why not lay eggs closer to the river? It's because they don't choose - nature tells them, and likely their ancestors laid there before there were houses and now generation after generation still goes back as they all would have been hatched in that same area. You can change this by digging up eggs and transplanting them to somewhere safer, so when they are hatched that new spot would now be considered "home base". Cool huh? ;)
Hi. Can I use a short part of your video in mine? I talk a bit of finding people with thermal camera and this would be cool to use. Like 7sek or so... Also I would mark that I got the footage from you in description of the video.
With my last 3T when I would use zoom link, it was really close even at 56x, now with the new replacement one I got last week, they are really far off, even at only 7x zoom (56x is probably 15-20 feet off). Know a fix for this?
I have a Nahanni 175 (harbercraft 1999) and have NO Idea how to put the top (enclosure) on it, if you have any idea I could sure use some help man... I want to get this boat finished up so I can start fishing with other veterans!
@JaimpieNL1 find a local search and rescue and ask them if they need visual observers. And at some point they may let you take the controller under their license.
I like the coffee maker idea. I mean, who wants to get up in the morning and realize they forgot to fill it. Then struggle all blurry eyed without the bifocals on to get it off, over to the sink and then back on. I applaud you sir.
Been there. It was so bad that a heat gun didn't work. Completely filled the cover of my Neptune 4... After hours of heating and cutting little chunks I finally gave in and ordered a new tool head. 😢
At around 7:00 in, you mentioned/demonstrated it remembers the temp range as you switch modes from precision to wide. However, when you set it in precision you were between 60-90° then it changed pretty drastically when going to wide mode. So either I’m confused, or it’s not storing the setting from mode to mode. I’m probably confused and hope you can clarify for me.
