Yes

During L6 it will be reduced opening width and leaves comes to stand still

@@sanudraj ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-U6dM-IgZIN0.htmlsi=5SzISPydCyuWcy57

Thanks

Hi do you want to keep the door open always !

@@sanudraj I press the button, the door opens and stays open. It doesn't close

For swing doors there is a switch on the side which can be used to make the doors in automatic mode , door open mode and close mode

You need to check if the safety output is in open contact for both sides inside and outside If its in open mode then you need to close the contact

Thank you! Cheers!

+971 55 6056680

Thanks 😊

Hi no we are located in UAE

Thanks for the comments

@@sanudraj You're welcome 😉

Just send me your inquiry to my whatsapp 0556056680

YES

In LE mode you need to press the ‘-‘ button to start the program. If it is not working you need to check 1. Check connections for the display switch , 1 - 44 is connected with jumper cable. 2. If first step is ok then check the connection for the motor encoder. 3. If both steps not working then you try to clear the existing program and reprogram.

@@sanudraj ок, thanks! How often do the integrated elements on the control board break down? Are you repairing or replacing control boards with new ones?

Its very rare that the components getting breakdown in the DCU. We often request the customers to replace with the new one as they can get a 1 year warranty on the new board. Once you have repaired the board it cannot be under warranty. The board may work or may not work as the components used has to be matched according to their specs and standards. So from my point of view its better to replace with the new board .

CP it menu .

Posibil ,ai ars controlerul la o invatare gresita !!!(eroare 12 si 10 )

Clear Program CP

www.scribd.com/document/459132015/GEZE-Wiring-diagram-en-808301

Thanks 😅

Thanks

Sure i will share the document

www.scribd.com/document/459132015/GEZE-Wiring-diagram-en-808301

You are welcome 😊

You are right

THANKS !