Webb's Water Gardens is a family owned business that has been helping pond enthusiasts since 1981. Our website www.webbsonline.com has everything you need, and our staff has the answers you are looking for. We can be reached by 1-866-819-7663
I have a all-in-one unit (easyclear 3000)... since I can't shut off the UV by itself I guess adding microbe-lift is totally useless in my case...? thanks
Hello this is a helpful video - I've only had my unit 3 months. I noticed my water is green and is not clearing up. I checked the trip switch and my UV light did not light up so I purchased a brand new UV light thinking that was the issue. I just installed the new UV light and checked it using the trip switch you show on your video, the new light is not lighting either. I've only had my system 3 months, could the control panel not be working already? all the other lights on the control panel work, its just not turning on my UV lights?
Hi I have a hospice revolution pressure filter and I changed the bulb and tested the fuse but I still can’t get it to light up is there anyway of testing the unit? I would rather not have to replace it as they are so expensive Thanks for any advice you can give me Tara
I have the same issue with a new unit. Vegetable oil was suggested by Webb's but that was unsuccessful too. If I take the O-ring out, it closes fine. If you came up with a solution, please post it as I'm trying desperately to find a solution. I just left the top on it and hoping it will loosen up overnight.
Im considering getting this but it seems retarded that the pump is outside the box. Doesn’t it get clogged? Or do we hope the skimmer is so effective nothing gets to the bottom to clog it
What is the optimum depth for water lilys, in inches of water above the shelf the plant sits on? If this fertilizer needs to be applied every couple weeks, that means climbing into the pond to do so, correct?
Nice, easy-to-follow video. Thanks! Just a suggestion. If you're re-doing this video, wear a WHITE t-shirt, not black. You gave us a VERY BRIEF view of the plastic 'Y' in the 'volute' (?) but it was mostly invisible due to your black t-shirt as the background. Also, I got a LOT longer out of my Pondmaster Model 12 pump (1200 gph). It lasted 25 years without me EVER even taking it apart. It finally started making nasty noises and I discovered that the center of the plastic 'Y' had broken away. The impeller unit looked just fine, though. I purchased a new 'volute' (and a new impeller anyway, even though the impeller was actually fine). Now I'm expecting to get ANOTHER 25 years out of the pump! But from now on I'm going to clean the innards like you recommend - At least once a year, anyway. When I take it out for the winter. My pond's not deep enough for a Canadian winter. Even with a heater.
Thank you so much for this video. I was pulling my hair out trying to figure out how to assemble this according to the pathetic directions included with the pump. Now I'm all set. 😅
My tube going to 22 feet water fall has failed where it connects to the pump. What is a smart solution without digging the ground to replace the entire tubing?
thanks for the information as I have had one for years and wanted to know how to remove the pump from the filter base.... looks like it just slides out (or should just slide out) Thanks again as I need to replace the impellor
There are a few tabs you can use as leverage - one on the top lid and one on the bottom canister. You can see them pictured on the top left page of 7 in the owner's manual.
My aquascape filter 24hr light would not light but all other LEDs seemed to be working, now, NO LEDs are working. I have not tested the bulb yet. Do you think I need to replace the whole board module?
I have a periha ultraviolet sterilizer uv-b54w it was my understanding that I can insert this in my skimmer and I didn't have to remove my filters but how far should I insert my bulb in the water?
I have a periha ultraviolet sterilizer uv-b54w it was my understanding that I can insert this in my skimmer and I didn't have to remove my filters but how far should I insert my bulb in the water?
We have a pond with no fish. Recently we have had some feral cats, 2 raccoons, and a skunk stopping by to drink out of our pond daily. This is in addition to birds and squirrels. Suddenly we’re seeing significant water loss in our pond. One of the raccoons has been taking nightly swims in our pond and we see all the critters on a motion sensor camera coming to drink. We’re trying to decide if we have a leak or if the critters are just draining our pond with their water consumption. If it is a leak, approximately how much would the water level decrease daily?
Pump bag stuck to the pump cage getting clogged within 12 hrs. Aquascape suggested doubling the netting on the skimmer net, which I did and has not affected flow plus easy to clean- I pull it out , hose it off and replace it instead of reaching into the bottom of the skimmer to fuss with the pump bag. I am the guy with the giving tree overhead.