Hey bro I have question for you. So my church has the wing and just recently bought the Dante card. Last week we installed it and it work great we received audio and send audio to and from Dante to the wing. The next day we turn on the wing and no audio was passing through the Dante network. So I opened up the Dante controller and didn’t see the wing on the Dante network. I troubleshoot it and called a bunch of friends that has the wing and Dante. And still no answer. I tried almost every way we can troubleshoot it besides destroying it lol
great vid ! just a few critiques: * the autotune seemed a bit grabby on some parts maybe dial it back a little * the Stereo image of the mix was shifted mostly to the left for some reason. Possible oops on the Stereo Bus?
Is it possible to send different tap points for each Bus?? Vocal bus send the Vocals include Eq and to the Guitar player Bus send the Vocals without Eq. An example. Thanks
Hey Mike, in our church we use the WING. And have not been able to find a way to save and load vocal names on Mics. Your example here. You loaded Adeline and the channel was still named Joann. Is there a way to load the Name onto the channel?
Man, thank you for this. I spent so much time trying to figure this out - had no idea I needed to also set up MIDI on both computers. This was so helpful!
Does Wing's graphical analyzer appear to be bugged or is there some function that I can disable? The graphic analyzer is not reporting frequency modulation on the channel equalizer page. Anyone else having this problem?
Does Wing's graphical analyzer appear to be bugged or is there some function that I can disable? The graphic analyzer is not reporting frequency modulation on the channel equalizer page. Anyone else having this problem?
Is there a way to send the mix with effects from the wing to the in-ear monitors? For example, I'm trying to add a gate, eq, compression, and reverb on my drums and I want to send those effects from the wing into the inear monitors for a better in ear mix.
What if I want to connect my s32 to a s16 behringer stage box. Will this give me 48 channels. We currently have the wing with an s32 stage box and are running out of connections
hello mike, Im a worship leader in mexico, very good content! i wanted to ask you, when you said you have a stereo electric guitars but you were using only 1 channel in the console, how does it works on the stage box? for example, does channel 7 and 8 convert to channel 7 in the console when you use the stereo? and channel 9-10 in the stage box convert to channel 8 in stereo in the console? hope you understand my question haha, thanks
I recently got a stream deck at my church. While using this, can the same device be used with OBS? Like can i control my sound board, video source, and such or do i need another device for that?
Hello Mike, we have a weird issue with the S32 stage box we just installed. We had an older s32 stage box, so we decided to swap it out with a new one which we were blessed to receive. The problems are we a have lost the icons for phantom power and Gain which we had previously. Those icons are no longer showing on the individual channel strips. Additionally, they are available on the channels we have connected to local inputs. Confused
Hello Mike, Thanks for the explanation, this will make things easy for a lot of folks out there. I've been using the independent connection for connecting my Behringer WINGs (Stage and FoH) to 2 S32 stage boxes. Here is what I did: I have 2 Behringer WING Consoles and 2 S32 Stage boxes. I connected AES50A from FoH mixer to AES50A port of Stage Box 1 and AES50B of FoH mixer to AES50A port of Stage Box 2. Then I connected the AES50A port of Stage Console to AES50B of Stage Box 1, and AES50B of Stage Console to AES50B of Stage Box 2. With this connection, I can send out my main outputs from the FoH mixer through the Output ports on the first stage box - because they are setup close to the stage, my outputs can easily get to my processors and then to my arrays. My challenge is, I've been trying to send an output from the Stage mixing console through the output ports on Stage Box 2 but it's not working. Is there a way this can work? Is there something I'm not doing right? Cheers! Thanks. Joshua.
I run my mains and subs like you do. It’s fantastic. Just like aux fed subs where you can turn on and off and levels from each source with the convenience of having that information readily available on each channel.
We've also experienced DVS issues with various USB network adapters and ended up using Apple Thunderbolt Network adapters for machines using TB2 + OWC Thunderbolt adapters for TB3 devices. We haven't tried thunderbolt docks but perhaps they would fair well too. We even have one laptop using a TB2 to TB2 adapter into a TB2 to Network adapter - works flawlessly 😂 For desktops, we use the built in Network port for DVS and add a USB adapter for normal Networking. Good to know on the belkin adapters though - definitly a more cost-effective option!
the lowest latency "roud-trip" audio path i've been able to get with the wing has been (Wing AES50) <-> (M32C w/MADI) <-> (MOTU M64 madi-usb interface). Setting 48-samples of latency on REAPER, I've measured 174 samples (3.7msec) of real round-trip latency. I'll never see latency that low on the WING's built-in class-compliant-USB, or Dante Virtual Soundcard for that matter, which is almost unusable for realtime processing
