Sir mene ek sharp printer machine ka cartage refill Kiya tha uske baad mera printer change cartridge toner ki error show karta hai or machin printing nhi kar rhi hai kuch bhi help kijiye sir
This error is showing when you put out the fuser unit with machine power swich on, you don’t have enough thermal grease in fusing film or problem with connectors (check the connectors).
Each machine has a parts that have to be changed on some yield of ciopies. Developer and drum, on this machine are for 100k so when you replace the developer you must to do initialization on it... This procedure is for technical person. Don't do it!
Hello, I think that the magnetic clutch for registration paper is broken... Open the front cover, put the paper in the switch, make one copy and see (under the toner) are the green
After I checked the connectors in the unit and restarted the machine I needed to use this reset to start the machine. The reset allowed me to use the copier. Thank you Real Tips and Tricks for your advice and help.
Hello, I like your channel. Please help me urgently. I use AR-5623 and I just refill the toner when I discovered its getting fade. After refilling, the printer is not making any sound or roll after powering it, and it doesn't display any error also. It won't just do anything or any booting up sound NB: This started happening after the toner change few minutes ago
Hello, I like your channel. Please help me urgently. I use AR-5623 and I just refill the toner when I discovered its getting fade. After refilling, the printer is not making any sound or roll after powering it, and it doesn't display any error also. It won't just do anything. Please help NB: This started happening after the toner change few minutes ago
Hello, Thank you for subscribtion. First, turn off the machine and chek and clean the glasess on the scanner unit. You can also reset the machine (#, interupt, c, interupt, 14, start), the machine will reboot. If the problem is still displayed, you must to change the developer and toner with new ones and OEM. I hope that I help you with my thinking about your problem.
When the six dots blinking it means that the toner cartridge is almost empty. When the six dost they will shine (you can't copy and print) change the toner cartridge. I hope I helped you.
Open the ADF, and set the original on the Original Glass with the front side of the card facing down. Press ID Copy. (The icon with man and paper list) is displayed in the basic screen. Use the Keypad to specify the number of copies, then press Start.The number of scanned pages is displayed under [NEXT PAGE?] and the number of copies. Open the ADF, and set the original on the Original Glass with the back side of the card facing down, then press OK. If you press ID Copy, [TEXT/PHOTO] is automatically selected as copy quality. -To change the copy quality, press Quality before pressing Start. I hope that you can do it. Write me if everything is OK. Thank you.
Hello, Maybe the problem is the toner cartridge in the machine (if it's compatible), try with MX-312DV or put the oem tonner and cange the developer again
Hello, I think that "0" is not a problem, this is a start pozition... The alarm led for maintenance and developer it show that drum and developer are reached 50k and they should be changed and reset counters. Are your machine is working now or?
@@copierprintertricks_net first of all, thank you ... I will have some difficulties, I will send you a picture, I will be glad if you send me your phone number ... black area appears in the middle of the page when you get the printout, what could be the reason for this?