The manufacturer states that the excess can be stored for a couple of months by keeping it covered with at least 50mm of water, we recommend using the original tub and securing the lid back on. 👍😃
As bad as it gets. I have been using auto wire stripper for over 40 years and mine wore out. So I bought this Stanley stripper. Absolute junk the gripper side fails more often than not. do nor buy this piece of Taiwanize crap
The quick tension adjuster is piece of shit and does not work and cannot find instruction for troubleshooting. I guess it's time to say goodbye to Makita chainsaws and hello to stihl
Question for Milwaukee specialists: My Milwaukee Sawzall M18CSX has the following error: The LED lights up 4 times and the motor just jerks and returns to the starting position. If I then move the turbine a little, it only works for one second and stops. After that, the LEDs light up 6 times. While the LED lights up 6 times, I can saw in an emergency, but I have to press the trigger every second. I checked the MOSFETs and all 6 are correct. It seems that the signal is missing or the hall sensor is faulty? What is your fault diagnosis? Greetings from Switzerlan
I was running this saw for about 2 hours at about a 30-50% duty cycle ru-vid.comUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.
Disappointed in this bench because it is NOT, I repeat N O T as easy to open as this video shows and it is extemely heavy!!! 😫 It's a shame because I was really looking forward to having using it to use my Ryobi tools to do woodworking. ☹ So back to Lowe's it goes.
*Coming up on having had this saw for a year....am a casual user and bought it to cut up sections for bowl blanks. Easy to start, **Bestfor.Garden** also recommend even after storage for a couple of months. Simple chain tension adjustment. Just cut up some 20" Osage Orange, including ripping bolts in half (at an angle). Like butter!*
*This jigsaw performs flawlessly under heavy load🌗 **allabout.wiki/DJV180Z** . It seriously cuts like butter (I do use Genuine Makita Jigsaw Blades). No matter how hard the wood is, or if you're at maximum thickness, the motor never bogs down.The angle of the handle is perfect and doesn't fatigue your hand with lots of use.This saw is solid and definitely Makita Jigsaw's Swiss-made quality. The blade quick change is excellent!*
*I've had some time🌗 **allabout.wiki/Bosch-120** to get used to using the saw now and I think its a good one. It feels very solid and well made - great Bosch quality. I like the settings it has for the eliptical blade movement and blowing dust out of the blade path. The quick blade change lever is easy to use but wont be accidentally bumped. I feel that this is a tool that will last me many years. I was considering the next model up to get the additional blade stabilization, but I think most of the blade flex happens below the foot of the saw anyway were there cant be any support. I think usage technique can make up for most blade flex and you also have to realize that this is a fact of life with a jigsaw and use it accordingly.*
*My friend is in our late 60"s🌿 **allabout.wiki/XRU11M1** and we are huge Makita fans and have been for several years. We have more than Makita tools. This weed eater was just what we needed. I opened the box at **2:30** and by **3:10** I was trimming weeds and I am not handy. I trimmed for nearly an hour on the same small battery. We had a larger model and gave it to our son-in-law because it was just getting too heavy for us. This has very balanced weight and we love it.*
I proudly own 4 of them, I use them exactly like the man in the video, they saved the day compensating for the poor precision of the saw. (The angles) I always check out of habit before welding but never any nasty surprises My only grief is the prohibitive cost , around 1000$ CND for 4 items. However ,I tried to save some money by cheaper brands but it only made it worst by losing money on incompatibles items or solutions getting only bad results.
I got my Evo S 3555 CPS from you guys in September and so far it has proved to be a very good investment. And you were the cheapest source of the saw including delivery too! Great saw, great price and delivery, top marks TW!
Good video, but I found mounting the bar and chain very fiddly until I figured it out. I’m not convinced the folding screw down handle on the chain change assembly won’t break off eventually because it seems very fragile.
