I do how-to videos, travel, product reviews also some helpful videos on Amazon and eBay selling. Anything else I do in my life pops on to I try to organize with playlists so you only see what you want.
Some links to products in my channel descriptions I get paid for as an Amazon Associate I earn from qualifying purchases.
1/2 second blast of starting fluid and a match 5 seconds to fix that. I used to fight tires with straps. The last large truck tire i had to fix it was -25f and clean off the bead on both sides I fought it with straps for like 3 hours I was so mad about to give up. So i tried the fire trick it inflated the tire to 80psi on the dot in 1 millisecond. Less is more with starting fluid start small and work up never use the whole can. P.s why is my friends lawn tractor from 1968 still have air in the tires and Im on set number 2 on a tractor from 2010. I smell a conspiracy.
Another simple but more messy way is with grease. You simple smear grease between the rim and tire and it seals it enough the tire will push back on. Great for larger tires that the ratchet strap does not always get. I have even used both methods together
They fold when car wash mode is activated there is a button you see that says unfold mirrors if you wanted to unfold them after starting car wash mode.
4:51 This guy was the jump-scare of the day for me today. Shut mine off a month ago because the brine tank needed cleaned, left for all of July, came back, cleaned the tank, went to put it back in service and didn't take note how far out the valve was supposed to come. I have a 3/4ths valve, not a 1 and 1/4ths valve like yours, so imagine my surprise when it got real loose and started to drip-drip-drip! Clamped it back down and triple checked the directions to fully grasp what they meant by 3/4ths.
had the same problem with my 434 ......the easy method was to spray with PB blaster then lift the bucket off the ground 6 inches and level ....stand in the bucket and jump like a monkey while flexing the lever .....works every time
You can rip off the old tread and replace it. But the new tread will slip if the carpet is thicker. I'm probably going to get some penny nails and secure the new tread into the holes the old tread was formed into.
Why wold somebody in real life needf to user FSD? Tesla don't stop near speed bumps, don't avoid any holes on the road, drive over trash etc. Also, you can't do anything else (it would be great if you can play with your phone, etc), now you watch the road and wheel, and don't drive :) So, no purpose for real life and nobody will use this anyhow. So it's a waste of money from Tesla side to invest in FSD development.
That is like saying whats the point of computers because when they were first made, they were just big calculators. You develop a product over thme to make it better and better. With that said, I never paid for it. I just used the free trial it's not a great use right now and should really be free during development, but it is really fun to play with and see the amazing things it can do.
You are wrong Tesla’s current version slows down for speed bumps. It slows down for road work, identifies car in front waiting for left turn and goes around, understands every right of way scenario which lot of humans are dumb enough not to follow even after years of driving. It is going to improve but expecting machines to be scale up to human dumbness is tough
Thank you for this video. The only time I have seen this done it was filmed from the outside of the car. This is a lot more informative of what really happens.
Oh my gosh thank you thank you thank you I’m sure there are 1 million people out there like me that stood fussing with it for 10 minutes and couldn’t figure it out. The weirdest thing was though as I was setting mine I was setting it for 1008 which was exactly the time you were setting yours for lol
