Why no chrono readings or target accuracy examples ? Mentioning the cost of the stage 3 kit and the titanium piston would also have been useful.

Hvad er det for noget papir du bruger

Vil gerne have over sat på dansk

Nice !!! Thanks

hello sir i have a problem why my safety button is not work after i assemble the tigger unit

NickG tune is the best I've used in a 97k. I'd say out the 3 Paul Short was bottom

was there a result?

Its had plenty of coats? Right thanks for that yeah that's crystal clear 😂

Steve Pope and V-Mach are some of the best kits and tuning Iv ever used, such a shame that man passed 🙏

What chronograph readings does this kit give?

.. Don't even have a TX200 yet ,, but one day I will and the day will come to dive into the internals for maintenance and polish .. This video instruction will be invaluable ,,,Thank You ..

Excellent job!

Thank you, especially for setting it up outside the casing. I was scratching my head about getting it all back together again!

beautiful, exactly what i was looking for thanks man

Tks for sharing SaD

Great video! Shows me what I can expect from my lgu with a little tinkering 😮.

What did you use to polish it at the end? I could not understand what you said.

After you wet sand with the tru oil, do you wipe it down before letting it dry?

I’m not sure I’d take that gun outside. That’s a piece of art.

so you french polish with tru oil instead of Shelac

How long you leave it to dry mate between coats

This is also available in 22 mine make to much noise and shoot not good

Hello My name is Dr. Ricardo Sandoval from El Salvador, Central America. I am looking for Paul Short to buy a Titanium kit for a HW97. Can you provide me the Mr. Short contact? Thank you in advance

No contact at the information given for the moderator, ?

are you dead sir?????

16 joules

I know its 5 years since your video, I have used a similar method but using 'Elbow Grease' de-greaser sprayed on the paper as a lapping lubricant. This deals with any old oil and crud as it arises in the lapping progress. Even better soak it in de-greaser for a day or two before you start lapping to soften up the ground in dirt. Lapping with silicon carbide grits on a granite plate is much faster. btw. If you want some flat granite plates for lapping try your local ornamental stonemason [memorial/gravestone maker], To them, any offcuts or slightly damaged stones are useless scrap and I have had several great ones for free.... always worth a try. My best score to-date was a 3' x 2'6" x 3" rose granite plate that is flat to within a thou with an incorrect inscription on the bottom side - an expensive error on his part .. but a very useful tool in the workshop ! ...... Hope this helps someone ;<)

Steel wool is THE DEVIL. Scotchbrite only.

That piston seal is defiantly not the Weihrauch seal, the one you bought is a design of the original

Great video but the Torque screw is a T8 Dude

Great video how did you flatten you oil stone please

Thanks , trigger reset to a much safer position

Drop some pebbles or marbles into the can to make up for the volume you used, and you'll be able to use the bottle 6 months to 2 years from now without it all plasticizing and turning into goop.

How do you think it’ll go on knife handles

Please do this in a well ventilated room or the Pink Unicorn stood beside you will continue singing "Midnight the Stars and You" ?

Can this kit work work with the Vortek kit?

Would be interesting to see the fp of all 3 ,the last one looks like theres not much effort in cocking it ,is this because its lost power from the tune?

Magnifique, très belle réalisation. Bravo

16 joule

Good job on that. I'm doing a custom stock right now. I got a hairline crack near the bolt and a dent near the fore end I'm getting out. I steamed it and improved it some but now I have to remove the finish to get it the rest of the way

Great video' very helpful

Is 120 grid sand paper considered fine grade sandpaper in your area? I'd call 120 pretty coarse and scratchy.

what was used in the final polishin step?

I live in the Netherlands and have a 21 joules hw97 is it to do with that spring to release the blok by hand and some pressure?

Brake cleaner really removes everything

Still using my metal piston sleave in my 77kse. Vmach lasts 👍

I’ve recently acquired two beautiful air rifles a boxed Walter lgu and last of the Birmingham made air rifles the Wembley longbow both mint con, I’ve put sights on both and had a little plink in the garden and I have to say that the quality and finish on the longbow is beautiful I just cannot put it down.

All my stones have a twin ! I like stones in pairs ! Just rub them together every now and then Like a inca pyramid builder ! Those people knew how to flatten great big stones a that was a ways down the road ! The way you are doing it fine too ! Also if my stone seems clogged up A soak in gasoline or some other light and cheap solvent works for me ! cheerio

Nice video mate👍🏻,What exact wood dye did you put in on if you don’t mind adding the link below👇🏻

Looks great, how much time did you have to wait between coats