The London Electric Radiator Company are based in Wallington in South London . We supply and fit Electrorad heating systems to homes and businesses across London and the Home Counties. Electrorad radiators are efficient, cost effective, come with a 30 year warranty and look stylish in your home.
On this channel I will be posting videos offering tips for people with electric heating systems. If you are considering storage heater replacement or just getting some heat in cold areas of your home then hopefully my videos will help.
As a division of Wandle Electrical Services we are Registered Domestic Installers, and all work carried out complies with current IET Regulations (Eighteenth Edition) We are 'Part P’ compliant, fully insured and guaranteed.
Call us today on 020 8419 8345 for a free survey for your project. Your call matters to us, and we WILL respond.
I recently moved into a new apartment with Creda storage heaters. There are 2 in the living room. I dont need 2 as its not a huge space and 1 heater does the job well enough. Also, one of them doesnt seem to work. This is OK by me as i want to remove that one anyway, its an eye sore and takes up a decent chunk of important wall space. Do I just get someone to remove the storage heater and cut off the supply? The flat was built after 1999 so im assuming asbestos isnt an issue. How much does that job cost and is there anything else that needs doing?
Was not able to program my electrorad from this video...had a couple of attempts but no joy. For comparison view electrorad company video.....no annoying back-ground Musak (?)why?....no nonsense straightforward and clear.....set up for the week in 5 minutes.
I don’t want to remove it, but to lift it, to place flooring underneath (after pulling the previous flooring out from under it). So, I want to take the bricks out, then put them back in). So, do I need to disconnect the electricity at the wall, or is it enough to turn off the mains electricity for the whole house?
A sparky removed my heater so tradesmen could install flooring. He leaned it against the wall but didn’t remove the bricks. It slipped on to the floor as I tried to shift it and it weighs a ton. Impossible to move.
This is me with new build flat - no one told me there were bricks in them haha - took down 3 flights of stairs, then I learnt. Had meter changed as standard electric was (way back) far cheaper if you are out all day. Heat all gone by evening when I wasnt even in.
Hi there, In regards to the wiring, if you want to convert the socket into a regular plug socket after is there anything fancy you need to do? I read that the wiring needs to be reconfigured as storage heaters are connected to off/on-peak circuits? Is this something that can be done by yourself or do you have to contact your supplier? please advise and thanks!
Good afternoon, fantastic video. I am just about to buy a house (built in the 80s) that has four of these style heaters throughout and I'd like to remove them and replace them with the Haverland RC Wave units. I was just wondering what you would need to do with the cables coming from the wall after removing the old units, as the new Haverland units only require a local plug socket? Kindest regards. Sam
Should stick to the dimplex , the models before their quantum was much better , just keep them on 24 hours and if it gets too hot then just open a window , I’ve got 2 , one in my hall and one in the sitting room, costs penny’s once they’re heated up.
Hi, I’m literally doing exactly the same as you and am even using the same wave radiators. Just wanted to know if you did have to do anything in the end with regards to the wiring?
Hi, A couple of questions for you:- My radiator is AF05, 980 x 615 x 90d, 2000watts. so what are the dimensions between the brackets? Your bracket is touching the skirting board, the diagram reads 190mm from the ground and the diagram shows that the clips are fitted at the end of the radiator, is that right or does it really matter
Hi Terry, the gap between the brackets can vary the clips just need to line up with the indetation of the flutes. This is quite useful as it means you can fix the brackets to the strongest part of the wall or if its a partition to the timbers. We normally try and have at least 100mm from ground, In the 100's of these heaters I fitted I havent had any problems. We do always rest the bottom of the brackets on the skirting to give additional support, they are very heavy heaters.
Old type remove ,they stopped putting asbestos in them in 1973 ..but would you take a chance after seeing all the flats now thar are supposed to be fireproof are not..Manchester man...thank you.
I have the exact same radiators and they give me allergy symptoms when turned on... rather be cold than sick, I think my heators might have unhealthy dust in them
@@wandleelectricalservices-e7704 1 week later here I am with a viral infection from what I believe are these heaters, I’ve turned them off and have bought an air purifier, if you could please raise awareness on this matter that would be brilliant because I can imagine these heaters being quite detrimental to an elderly persons health considering they have effected me and I’m only 22.
About 2 hours work .BUT .you have to tell customers that it’s usually left with two holes in the floor where the legs have been and filling and painting to wall plus old radiator taken to the tip.
I think I have the same model as you as it looks the same - do you know where the model number is? Did you consider if they was any asbestos in the heater?
Hi Thomas, thanks for your comment. There was no asbestos in this model. If you watch the video it tells you how to find out if there is asbestos in your heater.
Hi, thanks for your comment. I would only attempt this if you feel you are competent with electrics. Isolate the power to the circuit serving the heater, undo the spur switch, test that it is isolated, Disconect the power cord from the spur terminals. Screw the spur back to the wall.
Hi, thanks for your message. We would normally visit and give a free assessment . If you would like to arrange a visit call 0208914 8297 or email Anthony @londonelectricradiators.co.uk