my channel is for sharing my drone footage, also should have some interesting and specific footage coming soon, i also intend in becoming a video reviewer, as soon as the opportunity comes all my content will be here :)
I parked at the foot of this today about a 10 min walk up to the tower. As I was working I never went up with my DJI inspire watching this makes me realise it was an obvious mistake. Great vid!
Thanks, I no longer have a drone at the min but wish I got up there more stunning views made better with a drone. Its great in the cold mornings too as you get above the fog and low clouds.
No the propellers are the same unless one got damaged, bare in mind it could also be the esc that has burnet out if that is the case you would need to relplace the whole board, for that i would contact g10 directly
Hi sorry to be a pain but I’ve had a Upairone for a Month now today when landing drone tipped, I think I’ve burnt one of the motors as only 3 working can you tell me If I can get a new one and where from. Thanks in advance
I am unsure as it has been a long time since i have messed with one of these drones, depending which model you have you may be able to use the motors from a dji phantom 2/3, if you do however i would replace all 4 motors
@@Ingramsir Well I hope you get back into it. I recently got a mavic pro 2 with smart controller. I love it. I have posted a few new videos on my channel.
Hi mate I have had a few problems with my upair one plus I have duna vid on it wen I get the satellites it won't turn off no satellite it's turned off any ideas mate don 😭😭😭😭😭😭😭🤔🤔🤔
I've just had a look at your video and I'm not to sure with th px4 board to be honest. Have you done a collaboration of your controller since changing your board ? I'm not sure how to with the px4 as I used mission planner. Also a simple one. Try it outside so you can get full gps lock before trying to take off ? Good luck
Drones above ok bro got another one for u tha ks for helping had no luck on help on hear but iam hooking up TS5828 40CH 5.8 MINI 600MW AN ITS NOT FITING THE ORGNELE. PLUG
The rx should have 4 pins an you should have 3 wires as you dont have a wire for sound, I have another video on my page which should show you how to connect it
I have a blue black and red wire connecting to my original transmitter. Where is the video for upgrading this to 200 or 600 mw and how to wire. Thank You
Brian s im not sure with that colour code as mine were black yellow and red. this is my video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OgvHTDE3Dpo.html
I have a blue black and red wire connecting to my original transmitter. Where is the video for upgrading this to 200 or 600 mw and how to wire. Thank You
Drones above Thank you very much, my fpv transmission got broken so I bought an adaptateur to get the fpv transmission on my phone and the default antenna is a very poor quality one thanks
Rodolfo Vieira thanks mate. iso set at 100 i record in D Cinilike. shutter speed is around 1/1000 but not to sure as i used the roller to adjust. just expose for the sky so nothing is blown out and the correct the ground in post. white balance was around 3500k
Rodolfo Vieira purely because i had no nd filters with me so using a faster shutterspeed lets less light in. if i used 1/120 on this day the video would be well over exposed
I flew my new upair one drone 2.7k stock drone 1.5 kilometers today wasn't till around 1000 Did I get any reception problems at 1500 fuzzy but still able to see what I was doin take the fpv antenna from the inside tape to outside of the leg seemed to really help keep em in the air fellow upair one pilots
Is everything I need to perform this mod here?. : m.banggood.com/Hubsan-H501S-H107D-H107D-Enhanced-FPV-Distance-5_8Ghz-14dBi-Panel-Antenna-2_4GHz-3dBi-Antenna-reviews-p1053146.html
Steven Armstrong sure this was phantom 3 advanced. at 60fps 1080p. i have done something wrong in editing though which seems to have compressed the quality slightly. this is the second upload of the same video as im trying to figure out what ive done wrong
Drone Journey no drone fishing unfortunately although that would have been a massive help haha. yeah it was a really nice place the owner said he had a couple of drones himself but was useless at flying lol
Duncan Rose haha cheers Duncan. im trying to re-do the edit on this as the white balance is off and I've lost alot of the image quality for some reason :/
on the very start of the video, i see that you changed on of the antennas on the controller, is the new antenna for video signal or for connection with the drone?
RifleRud thats for for the video feed it was a high gain panel antenna. i did a video on the mod too here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JymcpHgITxE.html