The Video Team One Channels purpose consists of enlightening the public with short videos for entertainment as well as education. All of the videos will be short entertaining or educational while maintaining high quality. Sign up to stay informed. If you have questions ask them in the question section we do our best to answer you. Thanks for Watching Our Short Videos. Video Team One(Home of Many Short Videos).
Disclaimer (These Videos are created for Reference only and should be viewed as such.)
@@brianrosado7211 , Thanks for watching our short videos. Thanks for the positive feedback. The port lives in a bad spot. You will need a body clip tool to access the port that lives in the wheel well. We made the video to help everyone find this hidden port to avoid the dealership sticker shock. Thanks for watching our short videos. Videos Team One (Home of the Short Videos).
@pimppindat214, We are glad that the video was helpful. Thanks for the positive feedback. Thanks for watching our short Videos. Video Team One (Home of the Short Videos).
@richieparrish7101, Thanks for watching our short videos. The F150 pickup trucks we worked on were 2006 and 2006 pickup trucks. Thanks for posting an awesome question. Video Team One (Home of the Short Videos. )
@collinmerideth8274 , Everyone who watches this video has the same wow moment and wonders why they hid the.port. Thanks for watching our short videos. Video Team One (Home of the Short Videos).
MatthewLopez-g6i, Thanks for the Positive Feedback. We try to keep the Videos Short and straight to the point. Thanks you for watching our (Short Videos") Video Team One (Home of the Short Videos).
Deadpool217, Thanks for the feedback. We felt they put the port in such a bad spot that normal people would never find it. We made this to take away the mystery involving the low port hidden in the passenger side wheel well. Thanks for watching our Short Videos. Video Team One Repair aka Video Team One (Home of the Short Videos)
Josh-gv9en , Our Short video was made pre checks and topping off fluid not for full drain and refill. On the C-30 all drain plugs are located on the bottom of the unit. be careful and use jack stands because this unit sits very low and the clearances are bad. In the future we will make a short showing the drain plug for the transmission. We made a video on the engine oil. Thanks for your awesome question. Thanks for watching our Short Videos. Video Team One aka Video Team One Repair (Home of the Short Videos).
Linlaw-216, Thanks for the feedback. We had to find this defective blower motor. Thanks for Watching our (Short Videos). Video Team One (Home of the Short Videos).
With this video having 76k views as of June 2024, I can only imagine 76k people were just as pissed of as I am at ford for locating it here. Thank you for the short, concise video.
Thisismyusernameokay, The reason we made this Video was to help everyone because this was so frustrating looking everywhere for the low port. Thanks for your positive feedback. Thanks for watching our short Videos. Video Team One Repair (Home of the Short Videos. )
That was my reaction as well. I used to drive a 2016 ford mustang and the ac valve was located conveniently under the hood. I drive a transit now and was like "where the he'll is it" until I had to search for this video. Now I'm annoyed it's underneath 😒
@Jon_Nadeau_ We spent at least 1 hour jumping all over thisTtransit Connect looking finally we call a few Technicians until Iwe found the location information on the low port. We had to make a video explaining that the port was hidden in the passengers side wheel well. Thanks for watching our short videos. We love positive feedback like yours. Video Team One (Home of the Short Videos).
amylambert8979 , Thank you for your positive feedback. We are alway happy to hear that our videos were helpful. Thank you for watching our short videos. Video Team One (Home of the Short Videos').
Richard, The upstream sensors were both the same but the down stream sensors were different from the upstream sensors. Our advice is to find the complete sensors because there are incomplete sensors that require you ro splice in the connectors for reuse. Thanks for watching our short Videos' Video Team One Home of the (Short Videos. )
Jose, Thanks for watching our short videos. We are a up and coming video channel. We want to help everyone we can. Thanks for the positive feedback and support. Video Team One (Home of the Short Videos).
If it’s 10 years old it’s not defective it’s just old and worn out, if you just bought it 6 months to a year ago then yes it’s defective but this is clearly older than that
Jillthecivic5650, We had a bad vibration in this transit so we replace the worn transmission mount the vibration calmed down a little but was still there. We found out to get rid out the awful vibration that is common in the Ford Transit Connect models that it is better to replace the Transmission mount and the two motor mounts. This mount may not be broken but it was defective and the vibration was gone after we replaced the mounts. We make these videos as a Reference to repairs based on our experiences. We hope we can help everyone that needs our help. Thank you for you positivize Feedback. Thanks for Watching our Short Videos. Video Team One (Home of the Short Videos).
Jean-Pierrehall, We would say yes because this is a tricky job. Only one person will fit in at one time. Take many Pictures. The blower motor cage is a done by feeling the 3 screws and then the blower motor comes out of the passenger side through the glove box. Many components must come out to make the path for the blower motor to make it to the passenger side Glove Box.The 1st time takes time and patience. This is a very difficult task. Take breaks and walk away when you need to to avoid getting frustrated. Thanks for watching our short Videos. Video Team One Home of the (Short Videos).
Mattwebster4355, Thank you for watching our short Videos. We love the positive feedback. We agree with you about hating to have to search for the port so we made it as quick and painless as possible to find the port. You are welcome. Video Team One (Home of the Short Videos).
@user-lw7tu8rk9h , Thank You for the Positive Feedback. We thought it would be fun to Put this short video out!. Thanks for watching Our Short Videos'. Video Team One (Home of The Short Videos")
Angel Viera, Our transit Connect trucks are the 2.L models. We would suggest you look at the hose because the hose and hose connectors are the same. We had leaks onto the shield in front of the passengers side under the engine close to the firewall directly onto the Bottom cover. Thanks for watching our short Videos. Video Team One (Home of the Short Videos ).
Diegoacostaperez9035, Thank you for your positive feedback. We love to hear that Our Short Videos may have helped with troubleshooting or repairs. Thank you for watching our short Videos. Video Team One (Home of the Short Videos).
21ck This is a video for just replacing a defective light bulb. Did you check for power at the power cord nearest to the light connector? Video Team One (Home of the Short Videos).
We had to replace a light switch on one of our Kubotas because of a switch failure but we had no lights. You are on the right track because discoloration is a sign of to much heat. If you have any questions please do not hesitate to ask them. Good luck. Thanks for watching our short Videos. Video Team One (Home of the Short Videos).
@21ck15 , Our Kubotas are part of a fleet and run many hours a day , so this would be considered a normal failure over time. We have had 2 switches fail in a 2 year span. The best thing for you to do is trace your wires to make sure you do not have any wires shorting out. We have replaced many head light bulbs. Thanks for the awesome question. Video Team One (Home of the Short Videos).
@robertlangdon3086, Thank You for the Positive Feedback. We feel short to the point is the future. Thanks for watching Our Short Videos'. Video Team One (Home of The Short Videos")
Adam backwoods Thanks for the positive feedback. We appreciate the feedback. Thanks for watching our short Videos. Video Team One (Home of the Short Videos. )
Raymclaghlin4919, Thanks for your positive FeedBack. We Love to help as many as we can. Thanks for watching Our Short Videos'. Video Team One (Home of the Short Videos')
FYI. For those who come after, they only started after 2004 with the fpdm. On older models Check the 301 relay and the#10 fuse next to the battery. Check the fuel filter. Finally Check the wiring from the harness to the pump. If this is all ok, it might be the pump.
SpitNpolish, 1st of all, thanks for watching our short Videos. We appreciate positive feedback and good information that may help our viewers. Thank you for your comments. Video Team One (Home of the Short Videos.)
The banks are backwards its a ford bank lol cyl one is on passenger side thats cyl.1 thur 4 bank 2 is driverside 5 thru 8 hope that helps, chevys bank 1 is driverside 1,3,5,7 cyl bank2 is passenger side 2,4,6,8
joelmorrison8165 , Thank you for the information. We like to post videos' to help everyone thanks this information will help the viewer. Thanks for watching Our Short Videos'. Video Team One (Home of the Short Videos').
roberthillis1948 , Thanks for Watching Our Short Videos. This Video does not show how to drain the Hydraulic Tank. To drain the tank you must have 5 Gallons of Kubota Hydraulic Fluid. The Drain Plug is on the passenger side under the hydraulic tank. Thanks for you Question. We will have to make a video showing the draining process and the location of a drain plug. Video Team One (Home of the Short Videos').
NativeSD53, Thanks For Your Positive Feedback. We try to put as much information as we can in Our Short Videos' to help as many as possible. Thanks for Watching Our Short Videos'. Video Team One (Home of the Short Videos')
Gollf9, The light bulb is a regular auto light bulb #894 Sylvania. You can get them at any autoparts store. Thanks for watching our short videos. Video Team One ( Home of the Short Videos")
angelchen8768, Thank you for your positive feedback. We are glad that we could help you with our short video. Thanks for watching our short videos. Video Team One (Home of the Short Videos').
abdulazizabdunasimov8978, When we first looked at this job we thought it was going to be complicated but we found it to be easy so we had to post this one to save everyone money and show how simple it was to do. Thank you for your Positive Feed back. Thank you for watching our short videos'. Video Team One (Home of the short videos')
Demottjeff, They put this thing in the worst place. We worked upside down with a headband light to see it and most of the time things get in the way we had to remove the gas pedal to get at the resistor. The job was not fun be we tried to make it easy for those who wanted to do it. Sorry we could not help you. Video Team One (Home of the Short Videos')
GenXMojo, Thanks for the feedback. We agreed 100 percent with the sockets as well, but we knew the sensor was in a bad space as well as defective so we went old school. Our motto is When in doubt buy the tool to get it out. Thanks for watching out short videos. Video Team One (Home of the short videos).
@ivnpnz8184, Thanks for your positive feedback. We aim to make the video that is strait to the point. Thanks for watching our short videos' Video Team One (Home of the Short Videos').
Clintonstephan, Thanks for your positive feedback. That was our goal to be straight to the point with the information. We started this channel because we just wanted answers. Thanks for watching our short videos. Video Team One (Home of the Short Videos ')
Onehairlessape, Thank you for your positive feed back. We are always trying to help anyone who needs help. Thanks for watching our short videos'. Video Team One (Home of the Short Videos').
jeffreyengle1262, So sorry it took so long to reply. We had to look it up to find the capacity of the tank because the fluid gets burnt and has to be replaced. Our units run many hours and the fluid went from gold to dark orange in what seemed like a little time. Kubota has there fluid locked down we only use their fluid. All of our fluid vendors could not find the exact fluid to replace Kubota's. Thanks for asking that awesome question because we want everyone to know the capacity of the fluid and to only use kubota fluid. Thanks for watching our short videos'. Video Team One( Home of the Short Videos').
Drumhitwonder, We had computer failures and lost all of our royality free music. We love the song but could not regain access to the songs title to answer your question. We are sorry. Thanks for watching our short videos' Video Team One "Home of the short videos'"
Tone S.G You are welcome. We love to hear that the videos' are helping people. Thank you for the positive feedback. Video Team One (Home of the Short Videos').
Rich Petrillo, You are welcome. We want to help as many people as possible. Thanks for the awesome feedback back. Video Team One (Home of the Short Videos).
Thank you for the video. I was going insane looking for the low port. Leave it to Ford to hide the fucking por, I love my tundra more everytime I work on a different vehicle.
Nick Mellinger, We looked for the low-pressure port for so long that we were motivated to make videos that will help regular people fix things that they engineered with the intent to keep us frustrated enough to say forget it and take the vehicle into the dealership. We are glad that we could help with this video. Thanks for watching our short videos. Video Team One(Home of the Short Videos).
Danny, we always value customer feedback. Our tractor is old we filled the fluid through the port shown in the video. We will look into the port beside it to see what the port is used for to see if it is better than our process. We make videos to help as many people as possible so we love input that is helpful. Thank you for your input. Thank you for watching Our short Videos') Video Team One (Home of the Short Videos")
J.P. Jones, Sorry our video could not help you with your F-150. You should try rewording your search and make sure to use the model in the search with year and hopefully, that will bring up your seat style that will help. (eample : 2012 F150 XLT passenger side with console removal). Thanks for watching our Short Videos'. Video Team One (Home of the Short Videos)
@@Videoteamonerepair actually my truck is a 2006 expedition I just bought. I suspect that the previous owner replaced the front bucket seats with the seat I described . I was hoping to figure out what vehicle the bench seat came out of.