Leider kann man nicht sehen ob das made in Vietnam ist nur das ist original. Danke für das tolle Video jetzt habe ich mal gesehen wie das Samsung 5 v 2 a von innen aussieht die 2 Ampere stimmen nicht ich habe das selbe made in Vietnam und es hat 0. 7 Ampere EP 10 ebe ich habe das schon 8 Jahre ist möglich das sich das aussehen geändert hat das Innenleben ist aber gleich geblieben.
Late answer, but yes, you need to take it of if you want to be able to clean the fuel intake valve properly. And if all parts are undamaged there shall not be any problem to put back together. One useful tip if you got a phone with camera is to take a few shots before you take something apart the first time. Then you have pics to look at if you cant remember how things was assembled.
@@newgame2day That one you simply have to change if needed. If it runs to rich (engine spits and blubbers and can´t rev properly) you need a smaller one. If the engine are weak, hard to start but rev good downhill, its to small. I have a Speedfight 2 and the default jet in that one was size 60. After a renovation and fitted with a new sports cylinder on, it wanted bigger. I changed to a 62 one, but that was not good enough, so i try a 68. Now it runs fine and pull away good. Open your carb and check what size you have on your jet, and buy a set of jets so you can try out which one you need.
@@newgame2day Sounds like it´s flooding. Have you check the valve by the floater? Take it of the bike and clear out remaining fuel. Put a clean hose on the fuel intake, turn the carb upside down. If you with our mouth can blow air in to it it does not close properly.
@Noah Vdc You mean the jet? That depends on the setup you have. Can´t say for sure, but think original is about 60. But I have a sports cylinder on mine and unrestricted CDI and removed variator washer, so mine want a 68.
