Wonder if it would work on key fob on a Mazda 6. But I wouldnt know what the chip looked li and I dont want to F up the good key. Gives me an idea though. Wonder if you held the key fob near the ignition then inserted the unprogrammed transponder key if it would start it? Then maybe it will program it.
You are not bypassing the transponder you are only relocating it. All these videos claim this. The real deal is to fool the electronics without a transponder chip or bypass all of the electronics. This I doubtbyou could do as my bet is the computer has to see an ok from the transponder in multiple parts if its overall program
My man... Your birthday should be a Holiday. Tip broke off my truck's key so I made a copy but it opens the doors and tailgate without a problem but won't turn in the ignition. I though it was a lock cylinder problem until I read about chips in the keys. Luckly I still have the brokem key, so I was thinking of cutting broken key off at the plastic part and then glueing plastic to the copy I made. Wasn't sure if it was gonna work then came across your video. You just gave me hope, that's if it's not the lock cylinder. My truck's battery is dead at the moment, do you know if that will affect anything as far as reading the chip? By the way, to the ones worried about it not being a bypass... If it works, who cares.
I am not using my ignition i had a seprate one someone installed so i used that one and to open the doors i use oribibal keys was dtivibig it a while andvall of the sudden the hazards start flashing and car cuts out
This video is super old now but im going to try this as well as im having the same issues with my 2003 but the best part of the video is how many GROWN adults dont listen to what you said or typed in the comments and they all just keep saying the same thing lol. "This is not a bypass. Your car will be stolen. " lol WHO CARES!? Im doing the same thing. The car is 21 years old. They steal it ill just report it stolen and take my losses but ill enjoy it while it lasts
Se seu carro ficar no sol e o painel esquentar . Vai derreter esta cola e se este chip cair para dentro do painel Nem Jusus Cristo Liga este seu carro 🤣
Ok my 05 altima ser has 1 chipped key. Currently the steering wheel is locked and key will not turn either. I have no one to help with this so im about to try this. Wish me luck cause if it dont work i do not have 300 for a new key.
I don't have this car anymore but I think if you applied pressure to the steering wheel while trying to start the car it should disengage the steering lock
Help me please, i just lost my chip but i have the key and remote function is working for door open and close, do I need to remove that chip. Its mitsubishi mirage 2014. Help me please 😢
Good tip but just be aware if you try to start it with a second chipped key , it probably wont start because it will detect two microchips and will think someones trying to steal the car
@@mikechanic184 Technically a "second" chipped key should be the same as the original key which you showed worked fine. If the second key wasn't identical to the original it simply wouldn't work? 🤔
@@KevinHallSurfing Despite having the same frequency and whatnot; the two chips won't be synchronized and may even interfere directly with each other. Probably varies by brand
IT WORKED FOR ME TOOO!!!! Omg definitely saved me a couple of hundred dollars from having to buy a key have it programmed and all that bullshit so thank you so much for the video man great trick saved me so much money$$$$$$$
I have a 2010 Nissan Qashqai, took the ignition barrel fully apart(broke a filer end in. Due to difficult key remove had to file the inside) I have disconnected the battery so my airbag wont go off. Anyway, since I have built all together, central locking stopped working not even the inside switch and vehicle wont turn over not even dash lights are on when turning the key ?!? Anybody could help please ? Thank you
Do you have to remove chip from key, or could you just secure key around the ignition switch? I like your ideal, but would rather not remove from key, old key doesn't have key fob, new key does. This is used 2010 Nissan Titan, buying keys from Amazon and programming the fob is easy on a Titan, but starting vehicle requires programmed key, that deal told me $170 each.
Can you explain why it works wen chip is placed next to antenna and not Wen in key it's not that far away am aving trouble with my car that's bin stud a few years
So basically you just made your car very easy to steal , good work , would you rather spend 80 bucks or buy a new car , at least you keep auto thieves working , without you they would have nothing to do.
STUPID QUESTION: Does the transponder not need a battery to send a signal to the ring? I have this exact problem with a 1997 Mercedes S500 - but the transponder is housed inside the FOB that has a battery. Thanks
What if you don't have the original key only the spare? I have a 2003 chrysler town and country my ignition key got lost I can't afford dealership prices and I can't get my van to move
Sydney Australia. Only have one key from dealer when I bought it. The local Subaru dealer wanted KEY $417.85 CUT: $44 CODING: $88 plus $170 to "read" the ECU. That's AUD $ 719 all up. What a joke.
@@stacymilligan5253 Rip off. I purchased one from China for AUD $20.62 (about US $15) including shipping thinking probably a fake but have a blank to get into the car at least and it worked. 😮Is identical in shape and had the correct 3 Button 43hz 4D-62chip for my Subaru Outback 2007 as advertised. 😍
@@KevinHallSurfing Look up on Google to see if there are vehicle locksmiths local to you. They may be able to get the china key working (but most won't cut the blade)
I'm sure there's a way you can do it but basically at that point I'd be telling you how to steal a car this is just a quick tip to save you some dollars
@@mikechanic184I need help someone tried to steal my Nissan and took the immobilizer out I just want to be able to start my car and talk it to the Nissan dealer
Not a bypass. You removed the chip from the key and placed it by the antenna ring. Yes this can be done but if the chip falls out, you better hope you can find it lol. Sad but many people do indeed do this to avoid transponder keys. You have to be sure that the chip cannot fall out though. If it does fall out you will have to have to have another chipped programmed which can cost a couple of hundred bucks. In order to program you have to do a computer hook up to create a new chipped key.
Okay have a situation where the chip came out of my key and i was only given one key for the car when I bought it , I have the key but the chip is missing and now the car will not start is there anyway I can replace the chip ?
@@mikechanic184 yes I was I called the dealership they wanted 350 because they won’t just give you a new chip called locksmith and he was 250$ but he came out and cut and programmed within minutes put the new key in a she started right up thanks so much for the video I thought the issue was something way worse honestly