Tutorial: how to fix hard drive by swap the PCB board 1. How to find the correct donor board 2. Why the PCB board firmware (BIOS) transfer is a MUST? 3. What is the PCB board firmware (BIOS)? 4. Where is the PCB board firmware (BIOS)? 5. How to transfer the hard drive PCB board firmware (BIOS)?
En pleno año 2024 alguien en México que me ayude a realizar este proceso con un disco Barracuda 7200.11 ST3500620AS que no reconoció el Bios después de un reinicio de pc? llevo con este disco duro dañado como con 14 años, tengo fotos de valor sentimental enorme. Ayuda¡¡
I moved most of 26+ years of data to a Seagate srdoof1. Left it moving the files over night. Now it is seeing the drive, but says corrupt or inaccessible.
Bisakah aku melihat gambar lebih jelas nya? Ini buriq lihat video saya kawan tentang pembongkaran saya video 4k dan + saya foto mainboard nya itu baru bagus
my defective SSHD was not spinning and undetected in bios, i put the new Donor PCB board and moved the firmware bios chip from bad board to donor , now the SSHD it spinning motor and it detected in bios, however i dont hear moveing heads and i cant initialize the disk in windows. What can i do next?
I tried to substitute the pcb board with an identical one by myself, but now i'm not able to understand which one is the original one... is there a way to understand it?
my one is yar41kwo were do i get a new board that will work the donner i used made it boot up but wont let me see whats on there i broke the lil 8 pin chip aswel
My 14 year old Little Disk gave up some weeks ago. I too wondered how to open the plastic housing. You can see that the front side (with the cable and the power pin) is build into the housing. If you use a stiff and sturdy tool it is possible to break the glued parts of the housing. Do use a metal tool like a screwdriver, because you can damage the electronic parts inside. I used the LEGO tool for parting blocks and other elements. If you hear a "crack" on both sides of the top (readable LaCie name) the two parts loosen and you can slide the electronics out of the black box. Then follow the instructions of DataPro Data recovery Lab and hopefully you can save your Little Black Box. Give it a try!
This is a great video!! thank you. I have a very old tower computer and I am getting rid of it but I wanted to take the hard drive out as I don't know what's on it. I am having so much fun taking it apart!! I have never done this before!! thank you again!!
Thank you for your good video. I have a WD80EDBZ that produces the following sound when connected to the power cable and turns off. Thank you for guiding me which part of the hard drive has a problem. drive.google.com/file/d/1IBZ5-eJu9MOcN6zwoerNVMLzS_DzD0wS/view?usp=drivesdk
with a hot air soldering gun...or a point tip soldering iron , solder sucker and wick and some solder flux... the BIOS chip has 4 solder joints both sides ...pretty easy/
I have a 4TB WD My Book external drive, which the hard drive has failed, the model of the defective hard drive is WD40EZRX, I wanted to know what model of hard drive you can recommend for its replacement, I know that this WD green series was not very good and that the WD blue series is better, but they are compatible so that it can be installed in the enclosure. Thank you
Hi, my HDD of the same model as the video was connected to the wrong voltage and ended up burning the logic board, as shown in the video I bought an identical board and changed the BIOS, however, the HDD does not spin, the new logic board is fine and it is recognized on the PC, but HDD does not spin at all, what could have happened? Please give me direction. #Brazil