Rhinestones will fade on rims or anything exposed to weather, in a week or so! You wasted your money, but it's a good look and idea. You have to use Swarovski, Preciosa, or Zodiac crystals. Swarovski and Preciosa are best and equal in quality.
Congratulations you bought it for $1000 That means in six months it’s gonna quadruple😂😂😂😂 “ there’s nothing more expensive than a cheap Mercedes” CLK 55 2001 AMG owner Good luck to you bro.❤❤❤❤❤
“ when you own an AMG, and you can’t fill up the tank all of the way”😂😂😂 that’s either because gas is five dollars a gallon or the plastic nipple plug in that model is overflowing with sludge and it doesn’t keep gas and it just like mine😂😂😂. I’ll be back to check on you.
I used Loctite epoxy to attach neomydium magnets to my plates. I put 3 layers of gauze and some tape over the magnets as a cushion to prevent any scraping (I doubt there would be any but it's a good precaution). Those things are no joke! My plates stay on really well! There has to be some metal on your bumper to get it to stay on (Duh!)
I had no idea you could remove the weather stripping… I just forced the wire under and let piece of it hang over the pillars really tight, next free day ik exactly what I’m gonna be doing
Hi Just found your stitch welding video ... wow what an effort ... am part way through stitch welding my Ford Puma race car and I totally agree with your comments ... seal sealant yuck ... I may consider have the body shell dipped next time to remove all the crap ... hope your still going strong , encouraging to see the younger generation doing this quality of work ... all best ... Greg in the UK
🤌🏾When piecing it together on the back half cut along the lines of the panel so the extra pieces meet in the seams and corners not in the middle of the fabric...OR start with the backside of the panel...your call
Where did this go? I have a lifted on 30s and going to 33s next. In stock arms still and I am wanting to build my own long travel setup and accidentally found this. 3 years ago??? Where’s the updates ??
Did you sanded the interior and engine bay to remove the roughness from the fresh paint?like the genuine painted cars have smoothness from interior and from engine bay
tires are a 5 minute job at a shop for 20 bucks a pop axles can either be a 5 minute job or a 5 month job depending on luck, im scared of that more than tires
would it not be better for the bolts holding the harness to the floor to face up with the nuts inside the car ? That way if the car bottoms out after leaving the track the bolts wouldn't be sheared off at the floor releasing the harness. Or possibly getting hung up on something like a track barrier and pulling the harness down against the driver.
i still watch this often, this was one of the best videos to capture the drift scene at the time. it is always incredibly motivating, wishing all you guys the best.
