How do we set the up/down mode so that one quick press (either up or down) and the blinds automatically go (up or down) without me needing to keep pressing down the button?

Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip 1. Go to a blind you want to program and select the desired channel on your remote 2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades. 3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test. I didn’t try how to favorite a position but so far I have the desired settings.

Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip 1. Go to a blind you want to program and select the desired channel on your remote 2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades. 3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test. I didn’t try how to favorite a position but so far I have the desired settings.

Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip 1. Go to a blind you want to program and select the desired channel on your remote 2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades. 3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test. I didn’t try how to favorite a position but so far I have the desired settings.

Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip 1. Go to a blind you want to program and select the desired channel on your remote 2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades. 3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test. I didn’t try how to favorite a position but so far I have the desired settings.

Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip 1. Go to a blind you want to program and select the desired channel on your remote 2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades. 3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test. I didn’t try how to favorite a position but so far I have the desired settings.

Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip 1. Go to a blind you want to program and select the desired channel on your remote 2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades. 3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test. I didn’t try how to favorite a position but so far I have the desired settings.

Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip 1. Go to a blind you want to program and select the desired channel on your remote 2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades. 3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test. I didn’t try how to favorite a position but so far I have the desired settings.

Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip 1. Go to a blind you want to program and select the desired channel on your remote 2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades. 3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test. I didn’t try how to favorite a position but so far I have the desired settings.

You are a legend

you are so kind🙂😁🐶⚽🥇🥈🥉

thank you very much

thank you very much

Thank you so very much. I had given up trying to fix my blinds.

ME ENCANTA 💖

Beautiful fabric

Now do the top

wow mosic name?

Are these blinds motorized?

I can't really hear the audio, It's too muffled. Can someone re-record the audio or add subtitles?

I needed a 1/8 drill bit with the screws I got in 2024.

In 2024, the screws they gave me I needed a 1/8 drill bit. Also, yes the new hooks are a bit harder to work with aka the thing that latches to the zebra shade cassette.

PLEASE BE MORE SPECIFIC ON WHAT BAR CODE YOU ARE SCANNING!!!!!!! THE BRIDGE OR THE BLIND????????

So when I connect to the bond wifi network and try to "continue" the setup of the app, I immediately receive a notification that the wifi is offline. But all my other devices that are connected to the home wifi are connected and functioning. I tried to talking to one of Select blinds service reps, but was told to contact Bond directly. Trying to talk with a human at Bond is impossible.. Any suggestions?

So how's it powered?

Select blinds system is too complicated and the motor is too loud when going up or down! Not mentioning that pairing with Alexa is still not working.

Their motors are extremely loud!

Hello buddy! how are you? your video quality is good but main issue SEO. I am Video SEO expert. I Was analyzing your channel. Below your channel issue: 1. Title not SEO Properly 2. Video Not SEO Friendly 3. Not Satisfied View 4. Not Satisfied Subscriber. I Can help you Grow Your RU-vid Channel. i can solved your problem. I waiting For Your Reply.... Thanks

Well crap I was so confused when I moved into my apartment 😂😂😂😂😂. Thank you!!!!

IT WORKED! Thank you.

This video saved my life. Thank you!

thank you! love these they go great with my high end Marvin windows where I oped for the retractable screen and didn't want the added bulk of the retractable shade. I messed up my first few using scissors so grateful to find this video!

SelectBlinds is there a way to fix the 2 strings that are on the front of the blind? On the blind that your showing in the video it has 3 rows on the front of the blind, I'm not sure what to call it. My blind has 2 rows and on one row the string which is two strings corded through the blind from top to bottom it came loose at the very top, the part that you were holding when you were holding the blind. Thanks

How do we uninstall the cellular shades? They install differently than these do.

You're a godsend! Thank you so much!

Thankyou so much

Thank you!!

THANK YOU VERY MUCH!!!!! YOU ARE GREAT! YOUR EXPLANATIONS, STEP BY STEP AND VERY CLEAR, HELP ME FIX MY BLINDS! GOD BLESS YOU!!!!

Wait am I supposed to use a tape measure to measure flour? I've been doing wrong for a long time!

thanks!!!

In Beavis' voice: "heh heh, I'm looking to do some slats too"

Dude, thank you. Your video saved my lots of time and effort. Watching from Australia

The slits are too narrow to fit a pencil through to make the marks

Thank you!

If you have cordless lift blinds the second you remove the last string they will shoot up into the retractor. Then the fun starts.

That is weird most vertical blind wands are on the left not right side

THANK YOU SOOOOO MUCH!!!! Fixed them myself because of your tutorial 🫡

Thank you so much for this great video. Im pet sitting at my cousins and I thought I broke her blinds....found this just in time before she comes home haha

Where can I buy these blinds

thank god… i thought the apartment people just forgot to install the cords