I think for warranty reasons you keep the connector on the light side untouched, and use the supplied vehicle side connector, then use that to connect to aux beam fuse block/controller. This way, when you claim warranty, you just unplug the light at its connector and return the light with the connector intact.
Thanks you. So the main difference between the Ironman pro foam cell and ironman standard foam cell is bigger size. Bigger size because of strength required for adjustable rings right? In terms of performance should be the same?
Greetings Ironman! I have an Isuzu Dmax 2023 4x2 I bought last year and I'm still using the stock leaf springs. My question is what would be a good modification with your product I can add to my Dmax? My line of business is Bigasan so I'm carrying about 20 to 30 sacks on a daily basis which weighs 25kg a sack. What I want to do is eventually is to add a canopy in the back and have more load capacity for my rice. What product of yours that you can recommend adding to my Dmax to achieve this?
If you are loaded daily i would go with Add-A-Leaf for load. It will not give a lift and will be a bit stiff unloaded but give you excellent stability at load.
@@ironman4x4philippines20 Thank you so much for your quick reply! what if I wanted to go 25kg (1 sack) x 50 = 1,250kg on a daily baisis would you recommend Add-A-Leaf and Load-Plus? and perhaps having a Foam cell suspensions kit and UCA?
also i forgot sir my tire size is 35x12.5 20 inches rim I have 2 inches body lift and 2 inches lift suspension with foam cell shock steel bumper front and rear is the coil spring still in category a??? navara 2018 4x2
also i forgot sir my tire size is 35x12.5 20 inches rim I have 2 inches body lift and 2 inches lift suspension with foam cell shock steel bumper front and rear is the coil spring still in category a??? navara 2018 4x2
The shock I'm using now is ironman nitrogas but I can see that the shock has a leak so I plan to replace it with a foamcell. I've already bought an ironman 4x4 bacolod. I also plan to replace the old coil spring.
sir from k.s.a. magkano po sir steel front bumper for montero 2011 and installation? may viber number po ba kayo kng may branch kayo sa rizal or manila? salamat
All Ironman struts are adjustable height. Running a long spring might leave you with no sag/droop in your setup and ride quality will be bad. Forcing more lift by using a strut spacer might get you too much droop too. It is a matter of measurements and trial and error.
@ironman4x4philippines20 Okay mate I'm running that setup atm had no problems. I'm hoping to change it to a 2inch lift and 2inch body lift making it 4inch all around.
Sir I have the silver ring installed on the foam cell for the FJ, the vehicle looks like it has achieved a good lift, although the ride never feels comfortable, should I remove the ring, will this affect the height(lift)of the vehicle? Will it go lower? And will the ride be comfortable as the oem shocks?
Thanks for sharing, I learn alot from this video. I am considering buying Ironmen 12713 GR for Pajero front. I am looking for a confortable ride. Now I have stock Mitsubishi. Can you give your expertise in that issue ? Leaving stock springs