AVDreamer is a channel dedicated to people that are passionate about Audio Video and Home Theater. We dream about AV. We dream about home theater. We are passionate about it and we love to share our thoughts and dreams with you. The audio video home theater enthusiast. On this channel we will share our thoughts and review new and exciting home audio video products. Please like and share are channel with your friends and family, or anyone you know that love AV. We Dream AV, you Dream AV. So, enjoy! You can visit our web site www.vtxav.com
Furman is the upper end line of Panamax. This setup is a bit overkill for sure, but that's what I'm all about. The PureAV unit is an older conditioner, but is very over built. I am using the Furman's for the 2 XR13 subs and the PureAV for the Anthem 3ch amp. I have 2 different Furman conditioners for the Paradigm 120h towers. I am a dealer for both, so let me know if your interested in any of these. Thanks
@@avdreamer8250 could you make a short video about your power conditioners my friend. A few minutes explaining the essence, construction, features, connectivity and your thoughts and practical experience. Would be too much to ask?
partyhard lineup. the midnight cherry gloss is the single most beautiful finish available right now. the ruby frostbite does fit to your room's colour scheme better tho.
Yes, the Frostbites are a good match for my room. I've also have the Ruby's on the 120h's and center. I wish I could find a spot for the midnight cherry sub. My rooms just too small for 3 subs. Guess I could put it on my lap🤣
Hi Rob my friend. This unit is unbelievably beautiful. I prefer midnight cherry tho... I own the XR13 + JL AUDIO F113v2 combo for my stereo Hi-Fi system for music only with KEF LS60 WIRELESS as my main active floorstanding speakers. Maybe it'd be the right time to change for these instead...
Yes, these are awesome! Can't wait to get them installed. No more stressing over scratching high gloss finishes. Got 2 XR13 in the Ruby Frostbite as well.
Are you missing bass in such a small room? There is no description of your impressions and comparisons to other subwoofers you have had. DO NOT BUY an additional XR13. Sell your current XR13 and buy one SUB 2! (costs as much as 2x XR3) THIS IS the flagship Paradigm subwoofer, improved and made to order from year to year. It made a stunning impression on all reviewers. It can easily provide sound in 130 m2 rooms. It goes down to 7Hz! and has 112dB at 10Hz. And it's only slightly bigger than the XR13 :) Paradigm still calls it the best subwoofer in the world
Hi Peter, I agree that the SUB2 is a fantastic sub. The reasons I don't have the SUB2 in my system is power(and color). I don't have a 220v outlet. I'm also a dealer, so I need to have a couple XR13's in my system. The new colors are beautiful. At the time of this comment, I'm installing a full set of the Founders series speakers in Ruby Frostbite(mat red) I also, have a XR11 upstairs with a set of Founders 80f towers and a 70LCR center in Azure Ice(mat blue). I don't know if you've ever heard the XR13. It's an absolute powerhouse for it's size. With 2200 watts and a 4" excursion, this sub acts more like a 15". It's very smooth and accurate for both music and movies. Thanks for the comment.
for keystone you need a proper tool to push they cut the wire at the same time you can get crimpers that do all six at once the tool you were using makes it easy for a fault
when crimping the ends you should go all the way down to the outer core to provide shielding also the small snipes you use to cut the outer jacket don't use it for that its dangerous use you wire strippers it has a whole for that also a small rack for equipment is far better cheaper and neater then cupboard you need a labeling machine speakers work better if you feral the wire or use a banana plug
Awesome video, planning on the same end to end experience for my pool! Can you comment on the appropriate separation between these “cannons”? I’m covering a 1400sqft area between the pool and patio, how many of these would be recommended and at what distance? Planning to run them in “all channel stereo”, so essentially mono to each pair, 8ohm (amplifier sees 4ohm). Any advice? Thanks!
Sorry for the very late replay. I have been working on a project and haven't been able to check the comments. So, OSD does offer some ok products. They are on the lower end for more of a budget system in my opinion. One to the biggest differences is the Warranty. OSD offers a 1 year warranty on their outdoor speakers. TDG Audio's outdoor speakers are LIFETIME WARRANTY! That in itself is a big deal. The other difference is Jeff Francisco. He has decades of design experience. He has worked for some big high end speaker companies and knows his stuff. I will include a link to a sit-down video I did with him last year. This will give you some insight regarding USA based TDG Audio and Vanguard Dynamics. He is the CEO of both companies. I can even arrange for a phone call with him if you have questions I can't answer. OSD does not have that kind of experience backing them or can give you access to their CEO for questions. As far as what you will need for your system, I would need to get to know your project a bit better. Pictures would be great as well as any other info regarding your yard. I'm sure I can help you and work out a deal with you. I sure have enjoyed my TDG Audio system. My neighbors not so much. lol. You can contact me at avdreamer777@gmail.com. I will then give you my company info and direct contact info. Talk to you soon. Rob ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tyLukjgZ7-U.html
Currently planning a pool/landscape audio setup. These look very similar to the 6.5” OSD products, but a sizable price difference. This is important to me as I’m planning on 12-14 of these speakers running in parallel, so 7 pre-amp/amp channels. Can you affirm why someone should buy VDG audio over OSD? Thanks!
Great information. But now what? What equipment is installed to get each room running with sound. Sometimes same throughout and sometimes separate channels for multiple devices.
Hi Kelly, My Client has some of own equipment. I installed TDG Audio for Atmos and Surrounds . Paradigm for the front 3 and NAD receiver. Sorry, I don't have pictures of his setup.
So for each zone you need to have an amplifier ? Is that correct ? This allows you to only turn on the sound in the workout room or only the outdoor sound ?
Yes, each zone has its own Sonos amp. It's all controlled by the Sonos app (on phone, tablet or computer). You can run any zone independently or all together. I am a Sonos dealer, so if your interested in anything you see, let me know. Also, there are multichannel amplifiers that will do this as well. My client has the Sonos ARC soundbar and other portable Sonos speakers. So, it all works together.
The sub 1 is an incredible sub for sure. However, it is discontinued. The XR13 represents the latest sub technology from Paradigm. Although I can't do a far comparison because I don't own the sub 1. Both subs offer outstanding performance, but the XR13 is a more advanced sub. If you can get a deal on the sub 1, then that may be the way to go. But, if you want more color options and the latest tech, the XR13 is the way to go. Thanks for the question.
Sorry for the late reply, The orange conduit is typically only available to integrators/installers. Depending on your needs, I can ship this to you. Comes in 1" 2" & 3" sizes. Rolls come in 100' to 250'. Let me know if you are interested. Thanks
WiFi is ok, but, hardwired is always the best way to go. Faster speeds and less WiFi connection problems. I try to provide the best options I can for my clients. Thanks
Most speaker terminals on the back of receivers and mid to higher end speakers have a 5 way binding post. Most will except both raw wire and banana plugs. It is far easier to use banana plugs to wire your system than raw wire. I almost always use banana plug on all my systems and installs. If you ever need to move speakers or re-wire your system, this is the way to go. Thanks for the question.
@@avdreamer8250 Thanks for the answer! A bit after this comment I did some more research and learned all about it! I just bought a new amp, speakers, and now banana plugs to use with them! I've only ever had a very cheap amp which had RCA input and output, so I didn't really know about banana plugs! Also the only time I've really dealt with regular speakers and speaker wire is with an early 2000s speaker system. 😅
just noticing that some of the installed wall plates protrude past where the gyprock is fixed to the studs, in Australia the gyprocker would bend these back out of the way to glue gyprock, which obviously makes it hard to locate the screws thru the mounting plates at final installation, so guys you really need to address this at prewire stage making sure that the edge is a flush finish with the edge of the stud, same as the power outlet boxes. wiring regulations are obviously different between countries with separations from electricity cabling / plumbing pipes, another option is to install short lengths of correctly coloured conduit (yes colour is important for identification to trades) over or around electric cables/pipes. there is always more then 1 way to install cables correctly, what can look good is not necessarily correct ! But all in all you have done a decent job.
Yes, regulations are different in other countries. My installs are only in the USA, so checking local regulations are always important and highly recommended. I try to remember to comment on this, but I don't remember to do this every time. I just assume that people will do this for their own installations. Thanks for the comment.
Good video, thanks. It looks like the speaker wires are mostly NOT attached to studs or joists in their long runs, but only here and there with the black zip ties? So, no need to carefully pin the speaker wire to wood every few feet?
Hello, Yes the speaker wires are screwed to some studs with loose zip ties. You got of be careful where to do this. Keep away from ALL electrical wires if possible. I try to run the cables in such a way to make things as easy as possible for the insulators and sheet rockers. Sometimes they just don't pay attention or care about stepping on or pinching your wires. Thanks for the comment.
Do you feel $500 a room is reasonable to charge to prewire a room for in-ceiling speakers (2 speakers and 16 AWG wire), and, a low voltage wall box for a keypad controller (fed with Cat6)? Wiring only?
Yes, It performs very well. It's flat down to 15hz. Very powerful for it's size. Thanks for the comment. Please subscribe if you haven't already. Thanks
Another pro tip. Use colored cabling (other than white) for large systems (Green or purple for speakers, orange for APs, blue for hardwired network, yellow for phone etc.) Try to use 14 gauge or thicker. If you have time, build boxes for your speakers.
You can get it through my company. It's not sold online. It's sold to integrators and installers only. Please send me a detailed email of your project to videotronixnaudio@vtxav.com and I will be happy to discuss options for project.
Guy I'm literally an integrator and I guarantee it's sold online. I can ask about 5 people and find out what the carlon part number is or whatever @@avdreamer8250
Hi Tom. It's hard to compare these two subs. They are very different. The XR13 is a single 13" sub with 2200 watts of power. The JL audio F212v2 is 2 12" subs with 3600 watts. The JL audio sub is also twice the price. It's $10k verses the $5k price of the Paradigm XR13. The output is going to be different. The JL will have more output than the XR13. Almost twice the surface area and more power. Now as far as performance goes. They will both perform well for what they were designed for. If you want maximum output(for movies), then the JL will be your choice. If you want clean pure bass(for music), I preferer the XR13. Plus, it's a much nicer looking sub. This is just my opinion. Hope this helps. Thanks for the question. Please subscribe if you haven't already.
@@avdreamer8250 I'm already your subscriber. Thanks my friend for reply. The JL audio F113v2 should be closer to the Paradigm XR13 in every aspect. Would you mind to make a fair comparison between them?
Have you verified that they are fully charged? Are you using them as a pair or just the right side only. Does the left side turn on ok? For further tech help: www.klhaudio.com For technical support, please visit our Contact Us page and fill out the form with the specified “Technical Support” department request or call (833) 554-8326. A KLH team member will get back to you within 24 hours or less. Hope this helps.
Looks like you do nice work and sounds like half the battle is working along side a bunch of neandrathals. I'll never understand how or why trades don't respect each other's work.
2 subs are always better than 1 in most cases. That being said, the X15 and XR13 are very different subs. 2 X15 subs will do fine for most people in a theater room. The increased cone area and having 2 sub locations in your room will make a difference with multiple seating locations. But only after good calibration! If you have the budget, 2 XR13 subs would be phenomenal. The newer technology in the XR13 is superior to the X15. but, it's 2.5 times the price of the X15, so you would expect better performance with the XR13. I'd go with 2 X15's if your on a budget. If not, then you will not be disappointed with 2 XR13 subs. Plus, there much better looking. Thanks for the question.
I have two Paradigm SW1000 subs. Do you think I could replace with one XR-13? I watch a lot of home theater but also looking to make two channel sound better. I have AVM 90
If you have enough space for 2 subs you should always think in pairs of whatever sub you are looking for. Don't go back to single sub system. It's my advice my friend. I'd recommend you to sell both of your Prestige 1000SW subs and go for dual XR13 or XR11 instead. Never downgrade from dual sub system to single one unless you have space issues.
I agree with Tom's comments. 2 subs are better than one. Your AVM90 and SW1000 are a bit of a miss match. 2 XR13 subs would be a better match for your AVM90. The difference will put a smile on your face😅
Hi my friend. I own the exact same sub /midnight cherry/, but not yet integrated into my stereo system. Do you think it's worth the price or should i move on to JL audio FATHOMs instead.
You say you own the XR13 sub. Are you using it? For a 2 channel or home theater setup? Do you like the way it sounds? There are a lot of variables to your question. JL Audio are great subs no question. Both brands are at the top of their game. It's hard to say one is better than the other. They both have their strengths. But I will say this. Paradigm XR13 wins big time in the looks department. Very good looking sub. And it has a very high spouse acceptance factor. If you are happy with the way it sounds and performs for you, then keep what you got and maybe add a second sub. It up to you. I tell people to try to not get stuck in "analysis paralysis" . If you have a good product, enjoy it!
@@avdreamer8250 finally an intelligent unbiased reviewer. Yes my friend i own this sub. Not yet integrated into my 2 channel system tho. I'll have to rearrange my whole room first. I'll have to set up some acoustic traps and barriers after rearranging the necessary elements of my 2-channel audiophile music oriented room. So the XR13 sub is parking here without being used yet. So it would be helpful to know if the FATHOMs would be a better choice before all the room changes i am about to do soon. My room measurements in metric (meters) 6x4x2,5 (LxWxH), only 2-channel system exclusively for music (vinyl + hi-res streaming), integrated DAC, streamer, preamp, power amp, crossover in my DYNAUDIO FOCUS 50 (black lacquer) with DIRAC room calibration + only 1 sub out port. Would you go for JL audio FATHOM F212v2 or should i keep this absolutely gorgeous XR13 one?
Great tips for installation. I am planning to do some outside install on my patio. This is great advice. Normally I would butcher the job but this video gave me some ideas for a more professional design
Love the build. I went with dual 12" burial subs in my outdoor living area and could have added two more. Definitely would not be overkill. The more speakers and subs you have, the lower you can keep the volume (to keep neighbors happy) and still have solid coverage throughout the outdoor living area.
This is a designer's masterpiece. Absolutely stunning looking sub. One thing that concerns me is the width /2"/ of the voice coil tho... Anyone out there with some knowledge about the importance of voice coil width? SB16 ULTRA from SVS has an 8" one...
