i have only one fan .....no hub or extra cable....can I connect the 6 pin connector to motherboard?...6 pin connector means the connector for daisy chain
As long as you have the data power cable, the connection guide can be found here www.deepcool.com/products/Cooling/fans/FC120-3-IN-1-Daisy-Chain-Performance-ARGB-Fan/2021/13582.shtml
@@rene.grondzi are you able to change the LED lighting through the switch on the case? If so and you are tying to sync through the motherboard then you may want to check your motherboard’s lighting software. The cpu usage going over 70% has nothing to do with the LED, you may want to check the usage under task manager.
@@S2KV I can change the color now but it stil flickering, and when disconnect the rgb converter, my cpu gows back down to 5-12% on idle 😅 I even tested the voltage on the RGB connector on the motherboard it gave 12V max output and on the converter it gave 5V. I'm getting so confused from this issue😅 All i can think of is that maybe the converter is the problem it creates short circuit or a resistor is burned out on the converter.
@@rene.grondzi The flickering could be caused by the pcb board, but getting support for that part now would be difficult since the company has been banned by the US government.
Would this process be the same for a deepcool cc360? Also could I just use a 3pin 5v argb splitter 1 into 2 to plug in both the case fans and my cpu cooler fan? I’m kind of lost as you might tell
At first I was like "Well why does this have a red arrow, generally you can go left at an intersection???????" and then my dumbass saw it was a freeway entrance sign.
Hi there! We really like your video and would love to include it on our social networks. Would that be okay with you? We'll make sure to give you full credit
I don’t have the CH560 but looking at the builds the fans are using the industry standard connectors with the 5v 3 pin argb for the LED and the standard 4 pin pwm fan connectors
Hi, I have an TCL 55C735 QLED TV, and I have the fully same problem, I tried it with RTX 3070, and now I have an another RTX 3070 Ti, tried at least 5 different cables, with different lenghts, most of them were certified as HDMI 2.1 cable, but I still have the same result. The screen goes black randomly. A week ago, there was an update for the TV, and it started work with 4K@120Hz, but this was true just till the next restart of the PC and TV. Have you found any solution? I tried to get solution, I have red many topcis, no answer or solution, just found, that many others have this problem, also other brand of TV-s too.
I have no luck, it seems like the VRR on the TV can't be disabled which maybe causing the issue. I had sent a support ticket to TCL and they confirmed that the VRR can't be disabled and asked to provide more videos of the issue. I have tried 6 different cables and didn't resolve the issue either. I have it on 60hz now and that is the only option for 4K where the screen doesn't black out when connected to the PC. Maybe for gaming consoles there are no issues running 4K 120 hz.
@@janostoth8151so TCL responded and claims that there is a part that will need to be repaired. However I’m hesitant as I’m afraid they will scratch up my screen and they will not mount back up my TV which is over 100lbs.
Hey there! We're putting together a new project and we think your video would be a great addition on our social networks. Can we include it? We'll make sure to give you full credit
That street has plenty of accidents specifically that spot. It is a known accident spot, careless driers exiting that Costco parking lot. There is no center lane to exit onto as well. Either you make it through or you stop and block traffic. I already had several close calls leaving work taking that street.
That's the street I take when I go home from work everyday. I stopped going the speed limit due to these drivers just coming out of the parking lot without checking for oncoming tracking. It's a daily occurrence and I have had closer instances that barely miss me.
There are clips that locks the top cover piece to the bottom piece. At the 35 second mark you can see all those plastic wedge like parts along the inside of the top cover. I used a very thin flat head screwdriver.
Oh yes, the good old Santa Anas! I grew up in Southern CA and I remember those warm, sunny, windy days. Not a cloud in the sky and tumbleweeds blowing all over the place.
I tried 4 different brands which claims certified, in the end it looks like I would need to disable the variable refresh rate which isn't an option. Hopefully in future software updates to the TV would allow this setting to be disabled.
I tested with PS5 an it works fine 4K 120 hz VRR. The Problem that I have is the dual output of my AVR Receiver. If I use both HDMI outputs VRR and 120hz are no more available. But that's a bug of my AVR not TV.
First call I ever got as an Insurance adjuster was a drunk driver who drove the wrong way down the highway and hit a car head on. Very luckily the car he hit was parked on the shoulder with no one in it.
Hi, Kevin can I feature this clip "Wrong way driver on the freeway, celebrated New Years a bit early?" on my RU-vid channel? Credited of course (On-screen and link back).
