Тёмный
Greg Benitez
Greg Benitez
Greg Benitez
Подписаться
IG: @scionlandscaper
Landscape Renovation at our Home.
26:36
3 года назад
Rudde Rocket Tour And Dolphin Watching.
18:31
3 года назад
SmartCore LVP Installation & Carpets.
15:23
4 года назад
Toro Turfmaster 30 - 1st Cuts In 2020
14:00
4 года назад
Virginia Safari Park Trip 2019
19:56
4 года назад
Easter In Luray Virginia 2019
17:29
5 лет назад
Toro Turfmaster 30 1st. Cut of 2019.
15:23
5 лет назад
Brown Dye Mulch Job.
4:25
5 лет назад
Комментарии
@je862
@je862 4 дня назад
Very nice video! I really like your backyard kitchen. Everything is so nice!
@danielv2k11p2fo
@danielv2k11p2fo 7 дней назад
What’s the edger attachment make and model , thanks.
@alexandermeira7351
@alexandermeira7351 25 дней назад
Tighten up those motor mounts 😳 Great vid
@codystutzman2122
@codystutzman2122 2 месяца назад
Hey Greg, thanks for the video. After all these years, any idea where I could get an edger attachment like that for my Husqvarna 128LD? Anything I can find so far is gone or discontinued. Any idea what the model number on that edger attachment is?
@PaliGap1
@PaliGap1 2 месяца назад
Thanks - a useful and informative video. The before and after speaks for itself. Be blessed 🙂
@gregbenitez
@gregbenitez 2 месяца назад
Hey buddy how's it going and thank you so much for checking out my video. Yes before and after definitely speaks for itself I do not edit or photoshop any of my videos this is real time real information all the time. Thank you again for checking out my video stay safe stay blessed and see you on the next one👍🏻🏁👍🏻🏁
@richardcorbin4904
@richardcorbin4904 2 месяца назад
Paid $119 plus tax in Kalispell Montana to have a company clean my headlights and it took over half a day and it lasted only 3 months. I bought this and I didn't have a machine I had to use my hand and still in less than 10 minutes my headlights were crystal clear. Before, you could not see the inside of the headlight in any way form or fashion it was a total yellow and sort of white. This is super easy it takes 10 minutes and you're done.
@gregbenitez
@gregbenitez 2 месяца назад
Hey Richard how's it going hope all is well and that is crazy that that company charged that much for only lasting 3 months. I know they have to make their money but they should do a little bit cheaper for 3 months of cleanliness. Super glad you checked out my video and I'm glad it helped you out. Glad it came out Super bright nice and clean and you're right only takes 10 15 minutes and you're good to go. I love this product very easy to use and it's actually fun lol. Thanks again for watching see you on the next round have a safe great day👍🏻🏁
@w.brooks795
@w.brooks795 2 месяца назад
Cool stuff. God willing I will try this method on my 2017 Camry. Hopefully it will come out nice and clear. You did a good job. Blessings
@spencerrhea4574
@spencerrhea4574 2 месяца назад
what edger attachment is this? anyone have a model number?
@joaquinmireles3912
@joaquinmireles3912 3 месяца назад
Yes it wirks. Ut dies t last
@ao6679
@ao6679 5 месяцев назад
The interraction with the neighbors actualy made your video more realistic and legit. You should thank them for stopping by and have that chat with you rather than appologising for them cause from a watcher perspectuve they have done nothing wrong. I thought they were genuinely interested in what you were doing and would love to have them as neighbors.
@gregbenitez
@gregbenitez 5 месяцев назад
Hey buddy good morning and thank you so much for checking out the video I really appreciate your support. I just want to say that all my neighbors are wonderful people and glad to have them, she's just a little bit extra and a little bit nosy but they do have a very beautiful Toyota Tundra truck that I also like as well. Every now and then I do help her with a little bit of landscaping in her yard because I know landscaping equipment can be heavy. And another thing all of my videos are realistic I don't Photoshop I don't edit I don't change any color I don't do not use any computer generation images, everything is straight from my Samsung Galaxy phone right to an app so I can make slideshows and give you guys the most realistic videos naturally as possible, I just want to put that out there. So once again my friend thank you so much for checking out my video. Stay safe stay blessed to see you on the next one. 👍🏻🏁🚙
@davidfoulk3078
@davidfoulk3078 7 месяцев назад
Remove spark arrester. Remove low and high speed caps that cover the hi/lo adjustment screws, all are stupid ass government mandates, and tweak carburetor so that it screams with power.
@chrisllang8055
@chrisllang8055 9 месяцев назад
You should do your foglights while your out there as well, they can use a good cleaning too. Thanks for the demonstration. 😊
@gregbenitez
@gregbenitez 9 месяцев назад
Hey Chris how's it going buddy thank you for checking out the video I really appreciate your support. So I'm assuming you did not finish the whole video I did do the fog lights I put them in the slideshow at the end of the video. I did not want to show it live in the video I don't want to take up too much of people's time, if you make the videos too long people skip through it and won't get all the information so I try to make it as detailed but time appropriate as possible. But thank you once again I really appreciate your support and stay tuned more videos to come have a great weekend.👍🏻🏁
@aaronm.1998
@aaronm.1998 11 месяцев назад
Do more videos a$$hole.
@dirostudios
@dirostudios Год назад
Awesome 👏 thanks 🙏
@gregbenitez
@gregbenitez Год назад
Absolutely my pleasure thank you for checking out the video 👍🏻🏁👍🏻🏁🙏🚙
@favioescalon528
@favioescalon528 Год назад
I need to build a drain in my yard, is this product still good 5 years later?
@gregbenitez
@gregbenitez Год назад
Hey buddy good morning how are you hope all is well thank you for watching the video. This product is absolutely the best on top of and awesome product warranty so far so good five years later everything is continue to hold up and all the water continues to be flowing through all the materials and the NDS well. This season Mother Nature has been absolutely out of her mind we've been having some crazy intense thunderstorms with heavy rains and the flow out of these pipes is pretty incredible. The good news is the absorbent material around the pipe allows the water to drain through your soil so your surface layer on the grass side won't be wet for very long time It actually drys out pretty quickly, I am still impressed how you able to walk in your yard a couple of hours after a heavy rainstorm. Any other questions you may have please don't hesitate to ask I am here to help. Thank you for watching have a great day👍🏻🌱👍🏻🌱👍🏻
@Goodvibes-Adventures
@Goodvibes-Adventures Год назад
How has that installation held up over the past few years?
@gregbenitez
@gregbenitez Год назад
Hey buddy good morning how are you hope all is well thank you for watching the video. This product is absolutely amazing and so far still over the years has been holding up very very very well I can't be any happier and the best and awesome product warranty and far so good several years later all the water continues to be flowing through all the materials and the NDS well. This season Mother Nature has been absolutely out of her mind we've been having some crazy intense thunderstorms with heavy rains and the flow out of these pipes is pretty incredible. The good news is the absorbent material around the pipe allows the water to drain through your soil so your surface layer on the grass side won't be wet for very long time It actually drys out pretty quickly, I am still impressed how you able to walk in your yard a couple of hours after a heavy rainstorm. Any other questions you may have please don't hesitate to ask I am here to help. Thank you for watching have a great day👍🏻🌱👍🏻🌱👍🏻
@ramsha2000
@ramsha2000 Год назад
What about UV coating, sir?
@gregbenitez
@gregbenitez Год назад
Hey how's it going and thank you for checking out the video. You can use this to help prolong the haze. 👍🏻🏁👍🏻🏁 Meguiar's G17110 Headlight Protectant 295ml a.co/d/7EbLA2U
@mrkhone
@mrkhone Год назад
I have the 128ld also and been looking for the edger attachment. Which ones would work?
@gregbenitez
@gregbenitez Год назад
Hey buddy how's it going and thank you for checking out the video. I was talking to another RU-vidr about a month ago and he found one that worked well it's the Ryobi One stick edger attachment he found it at a local Box Store Like Home Depot or Lowe's.
@mikecruz9226
@mikecruz9226 Год назад
Hello there! I see you've also done the fog lights. How long did it last without using the Meguires UV Protectant? If it holds up for a couple of months for about 30 minutes of work, I would say that is pretty good!! Please let me know. Thank you!!! Does Mother's brand make a UV Protectant? It would be nice to just use 1 brand as opposed to using Mother's Mag & Aluminum Polish and then using a Meguires UV Protectant afterwards to finish it off and protect it....
@mikecruz9226
@mikecruz9226 Год назад
Does Mother's brand make a UV Protectant? It would be nice to just use 1 brand as opposed to using Mother's Mag & Aluminum Polish and then using a Meguires UV Protectant afterwards to finish it off and protect it....
@mikecruz9226
@mikecruz9226 Год назад
Hello there! I see you've also done the fog lights. How long did it last without using the Meguires UV Protectant? If it holds up for a couple of months for about 30 minutes of work, I would say that is pretty good!! Please let me know. Thank you!!! Does Mother's brand make a UV Protectant? It would be nice to just use 1 brand as opposed to using Mother's Mag & Aluminum Polish and then using a Meguires UV Protectant afterwards to finish it off and protect it....
@gregbenitez
@gregbenitez Год назад
Hey Mike how's it going hope all is well and thank you so much for taking out the video I really appreciate you. So I did some triple checking around and from what I can see and ask Mother's does not sell a headlight UV protection. They do sell UV protection for dashboards and leather interior but not specifically for headlights. There is a company called Chemical Guys they sell a Polish for headlights with UV protection already in the product so it's basically everything in one bottle you can give that a try check your local detail shop or Amazon has the product and every now and then Advance Auto Parts or Walmart sells Chemical Guys products. Other than that McGuire's is what I use for many many years and have no problems whatsoever. I do my wife's car headlights Every Mother's Day and last about eight months or more depending on weather conditions and how often you wash your car. Every now and then with Kidsports time gets away from us so we don't wash our cars as often as other people but it's good enough to get by. And the fog lights also as well last approximately the same amount of time so like you said 30 minutes of easy peasy work for about 8 plus month of clarity is really not too bad I just put on some good music in the garage grab me a nice cold beverage that have some fun. Any other questions please don't hesitate to ask and thank you so much once again for checking out the video see you on the next one🏁👍🏁👍🏁👍
@mikecruz9226
@mikecruz9226 Год назад
@@gregbenitez Hey Greg, thank you for taking the time to reply back. I appreciate your time as well. Yeah, these yellow headlights can be bothersome and very unattractive. They age the look of a car. Which Meguires UV protector do you specifically use?? I will get the same, as you have already tested it. Let me know, please. Thank you. I can't wait to try out this little project! I hope I get somewhat of a decent result... I'm not expecting it to look brand new, just decent looking...
@gregbenitez
@gregbenitez Год назад
@mikecruz9226 Hey Mike how's it going buddy sorry for the delay had to dig around the garage to find the Meguiars bottle lol. So the UV protection that I use is made by Meguiars and the label says Headlight Protectant helps maintain Clarity and provides UV protection. It's 10 fluid oz black bottle the fortunately there's no part number on it but I put the UPC number. Maybe you could check out Advance Auto Parts or Walmart and give him the UPC number see if it comes up in the system. So the number is 070382007256 and anything else any other questions please once again don't hesitate to ask I'm always here to help out my friend. Have a great awesome day🏁👍🏻
@gregbenitez
@gregbenitez Год назад
@mikecruz9226 Hey Mike I found it on Amazon I don't remember paying that price but the bottle does last a long time so click the Amazon link . But definitely check all of your local auto parts stores even check Walmart and Target they also sell car products Walmart has a better selection but if not Amazon here to the rescue LOL good luck brother and please keep me posted if you don't mind 👍🏻👍🏻🏁🏁 Meguiar's G17110 Headlight Protectant 295ml a.co/d/7EbLA2U
@mattyslicks
@mattyslicks Год назад
Does anyone know the model number for this attachment. I have a 128LD and cant find this attachment anywhere.
@gregbenitez
@gregbenitez Год назад
Hey Matt how's it going and thank you so much for checking out the video I really appreciate you. I forgot which model it was I ask my father-in-law he doesn't remember he got something different now, this was about five years ago I believe it was called trimmerplus, they were a company that made attachments for Small Engine equipment so that might be the name check it out but nowadays everything's so different. Thank you once again for taking out the video I appreciate you and see you on the next one.
@mattyslicks
@mattyslicks Год назад
@gregbenitez Thank you so much, man. I got a Ryobi one today that worked.
@gregbenitez
@gregbenitez Год назад
@Matt Meade My pleasure buddy. So that's awesome the Ryobi One fits the Husqvarna 128LD for the attachment connections 👍👍👍🌱🌱🌱🌱
@Og-Judy
@Og-Judy Год назад
Watched a guy do this. Didnt use a buffer. Buffedf it off by hand with a microciber cloth like polishing your car with rags
@gregbenitez
@gregbenitez Год назад
Hey buddy how's it going hope all is well and thank you so much again for checking out the video I really really appreciate you. And wow that is awesome no buffer needed he did it by hand that is so great. I'm happy to hear that no matter which way you can get it on there and take it off that is working very well. So thank you so much for taking out the video any questions please don't hesitate to ask I'm always here to help and thank you so much have a blessed day see you on the next one👍🏁👍🏁
@JamesJohnson-tl8po
@JamesJohnson-tl8po Год назад
I like my Husqvarna unit as well… same as this one. I bought a stick edger attachment at Lowe’s, a TrimmerPlus LE720. It worked fine, but the blade is impossible to change without tearing up the metal casing for it. Which brand & model edger attachment is this, If I may ask?
@gregbenitez
@gregbenitez Год назад
Good afternoon James how are you hope all is well and thank you so much for checking out the video. Let me contact my father-in-law it's been several years since his videos so I got to see if he still has the attachment I'll get the name for you and I'll message you back. Thank you once again for checking out the video and will talk to you soon my friend have a safe and blessed day.
@gregbenitez
@gregbenitez Год назад
Hey James how's it going buddy sorry for the delay but I'm trying to get some answers for you. So I talk to my father-in-law he does not remember exactly what name brand it is but the label the name wore off. He believes it is trimmer plus edger attachment, this company makes several attachments for different small engines. He got something different now it was about five years ago so I believe that's what it was. I know it's hard to find the good stuff from back of the day this new products nowadays don't last that long. So thank you once again for watching I appreciate you so much any other questions please don't hesitate to ask always glad to help. See you on the next video👍🌱
@gregbenitez
@gregbenitez Год назад
Hey James how's it going. I talked to another RU-vidr and he bought the Ryobi One stick eager attachment and worked very well. So check out your big box store or a Ryobi dealer 👍👍👍 He said it was perfect, so I'm passing on the updated information. Let me know how it goes my friend. Hey a good one.👍🌱👍🌱
@danial9902
@danial9902 Год назад
Nice work don’t forget the fog lights
@gregbenitez
@gregbenitez Год назад
Hey buddy how's it going and thank you for checking out the video. So I take it you didn't finish watching the video because I did the fog lights so if you continue to keep watching you will see the fog lights all cleaned up and done towards the end at slideshow part. Once again thank you for taking that my video have an awesome blessed day and see you on the next one. 👍🏁👍🏁👍🏁
@m1ggi3
@m1ggi3 Год назад
Thanks for the progress report. Getting this installed myself
@gregbenitez
@gregbenitez Год назад
Absolutely my pleasure any questions please don't hesitate to ask and thank you for watching👍🌱
@marksphotoperry356
@marksphotoperry356 Год назад
Hi Greg,did you also install a sport exhaust on that impreza,does it help the trottle response or 0 to 60 ?
@gregbenitez
@gregbenitez Год назад
Hey buddy good morning how are you hope all is well and thank you so much for checking out my video. This air intake installation was very very clean and so far working fantastic. We did a muffler delete to the vehicle we use the brand called nameless muffler delete and so far so good sounds absolutely fantastic and performance-wise the vehicle is working perfectly. I will ask my buddy how is it going 0 to 60 miles an hour I'll keep you posted but until then check out the link below I will send you the link to the muffler delete video thank you so much for checking me out have a great safe blessed day and see you on the next one🏁🏁🏁 👇 👉 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bClxDtYFnRM.html
@marksphotoperry356
@marksphotoperry356 Год назад
@@gregbenitez Sounds great many thanks for the info ! At the moment my 2016 Impreza 2.0 is in a shop getting both valve covers replaced, the dealer wanted $3500 can. But u found a shop for $1400 its a nasty leak that killed the oxygen sensor and left leaking will kill the coils , plugs and who knows what else.
@dalecesafsky4506
@dalecesafsky4506 Год назад
You just changed drawing cool air from in front top radiator to drawing less dense hot air from the engine compartment.
@gregbenitez
@gregbenitez Год назад
Hey buddy how's it going and thank you so much for checking out the video I really appreciate you. Thank you for your comment but surprisingly enough while there's a wide range of opinions about cold air intakes. There are many different name brands and manufacturers and Designs... BUT This is due to the FACT that a cold air intake systems offers up to 50 percent more airflow than factory box air filters and intake tubes. More air offers more power and much better fuel efficiency. Factory boxes have different channels and baffles in them which restrict air flow which causes using more fuel to push the vehicle to go faster. Which over time will wear your engine down. They are tons of different manufacturers and everybody has different budgets so they can get the brand that they like. The engineers and the research teams of air intake manufacturers I'm sure works very hard so that we can have fun and enjoying our vehicles. So I want to say thank you very much again for checking out my video I really appreciate you stay safe stay blessed and see you on the next one.🏁👍🏁👍🏁👍🏁
@ev1194
@ev1194 3 месяца назад
@@gregbenitezThis intake is an SRI while youre correct about it not restricting airflow as much as the stock box, it is still drawing in much hotter air which is less dense, a cold air intake would yield you more power and possibly better gas mileage depending on how you drive
@markshuput5228
@markshuput5228 Год назад
I did that same method on my wife's Impala yesterday. Unbelievable results.
@gregbenitez
@gregbenitez Год назад
Good afternoon Mark how are you hope all is well, thank you so much for checking out the video I really appreciate your support. And that is fantastic news that the results came out unbelievable. Every manufacturer have different Plastics even though they're different they're all still kind of the same so the clarity would be a little different per vehicle. Thank you for letting me know and thank you for watching and see ya on the next one 👍 🏁
@markshuput5228
@markshuput5228 Год назад
@@gregbenitez thanks Greg! Be safe!
@joepacheco7979
@joepacheco7979 Год назад
Nice yard! Too bad EZ Flow is too expensive for me, plus NOT available in Hawaii (what da hell, huh?). :(
@gregbenitez
@gregbenitez Год назад
Hey buddy thank you so much for checking out the video I appreciate you very much. And holy moly the EZ Flow Drain system is not available in Hawaii that's Wild. See you on the next video have a great safe day👍
@michealgonzales4498
@michealgonzales4498 Год назад
Best 7 Attachments for Husqvarna 128LD ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FBH_u1a37As.html
@paultam5616
@paultam5616 Год назад
The
@vincentrusso2769
@vincentrusso2769 Год назад
I used Mother's on my daughters 2012 Honda Civic head lamps. Works Great. It was like night and day. The only problem it only lasted 3 or 4 days and they were cloudy again.
@gregbenitez
@gregbenitez Год назад
Hey buddy thank you so much for checking out the video. Sorry to hear about it didn't last that long I know different manufacturers plastic are all different some Vehicles might stay clear longer than others. But thank you for checking out the video once again if you have any questions please do not hesitate to ask I'm here to help have a great day🚙🏁🚙🏁👍
@Sir-Kay
@Sir-Kay Год назад
Ok, I'm sold but. what about sealant? taking the top layer off the original clear will make the headlight yellow up in no time, any advice what to use in sealing the good work done?
@gregbenitez
@gregbenitez Год назад
Hey buddy how's it going and thank you so much for checking out the video I really appreciate you. As for sealant products there are tons like McGuire's, 3m, Blue magic, Turtle wax, Rain-X and the list goes on and on I haven't done a sealant because the mother's polish gives a nice shiny look to it and I do the lenses every year for our state inspections here where I live, it keeps them nice and clean the remaining 11 and 1/2 months. So other than that it would not hurt them it will definitely prolong it just follow the instructions and for what I've read online people just say take your time. Any questions please don't hesitate to ask thank you for watching and see you on the next one stay safe and stay blessed🏁🚙🏁🚙👍
@Sir-Kay
@Sir-Kay Год назад
@@gregbenitez Thanks man, I'll check those sealants out, here in Poland all I saw was liquid wax from the said brands and some carnuba thick chalkie wax too, do you think they'll do the same job as a regular sealant?
@gregbenitez
@gregbenitez Год назад
@@Sir-Kay Hey buddy my pleasure no problem at all it's worth a shot you can check them out I'll to see how they hold up. And ill send you a couple of links that I found on Amazon to see if they can ship to you. And if you can once you get the project complete message me back let me know how they turned out. And once again thank you for your support and thank you for checking out the video I will send you a couple of Amazon links to a couple of clear coat sealants I found online. Check this out on Amazon 3M Quick Headlight Clear Coat, Cleans and Prevents Lens Yellowing, 39173, 1 Kit a.co/d/7FcjZvs
@gregbenitez
@gregbenitez Год назад
Check this deal out on Amazon Limited-time deal for Prime Members: Meguiar's G17804 Keep Clear Headlight Coating, 1 Pack a.co/d/er4On3z
@gregbenitez
@gregbenitez Год назад
This is also for the car but I'm definitely sure you can put it on your headlights as well. It's worth a shot Check this out on Amazon Turtle Wax 53139 Hybrid Sealant Spray Wax Hydrophobic Fused With Carnauba (500ml) (Ice Seal & Shine) a.co/d/3sEkDt8
@willdemelo5994
@willdemelo5994 Год назад
Jesus, what a POS
@mikegrigoriadis9484
@mikegrigoriadis9484 Год назад
you are the Man!
@gregbenitez
@gregbenitez Год назад
Hey buddy thank you for checking out the video and thank you so much I really appreciate you. Have a safe and blessed day and see you on the next one.
@donjohnson3701
@donjohnson3701 Год назад
This is great! I have some leftover in the garage to try. But, being the cheap sob I am, I have been using toothpaste (the whitening formula is more abrasive) with a drill and sponge pad.
@somedudeontheinternetmenif9979
I have had the same model for 4 years and it works like a beast, good choice!
@gregbenitez
@gregbenitez Год назад
Hey buddy how's it going and thank you for checking out the video. These hedge trimmers are absolutely amazing Echo is the way to go. Thank you for watching stay blessed and see you on the next one 👍🌱👍🌱👍🌱💯🏁
@somedudeontheinternetmenif9979
@@gregbenitez thanks man, god bless.
@augustorodriguez9991
@augustorodriguez9991 Год назад
Hey man I have a 2017 Impreza and I’ve talked to a couple people and they said to tune the car before putting a intake on it. Both of the people said that they blew their motor for not tuning it with the intake. So should I get a tune?
@gregbenitez
@gregbenitez Год назад
Hey buddy good morning and thank you so much for checking out the video. But It's not a bad idea to get a tune before installing anything to your vehicle, but on the install we did we did not have a tune on it and the vehicle has been running smoothly for over a year now no problems. Thank you once again and once you get it installed keep me posted👍 🏁🚙💯
@augustorodriguez9991
@augustorodriguez9991 Год назад
@@gregbenitez okay cool than I will definitely get one soon! Thank you!
@andrewrathbun7309
@andrewrathbun7309 3 месяца назад
@@augustorodriguez9991you don’t have a turbo. No need to tune
@jaydee3046
@jaydee3046 Год назад
How does it look at night? I polished mine and they looked terrific until turned on at night. All sorts of scratches show up.
@gregbenitez
@gregbenitez Год назад
Hey buddy thanks for checking out the video we really appreciate you, well this vehicle has over 165,000 miles so there's plenty of road grind and scratches from interstate highway driving, depending on your vehicle manufacturer the lens will show signs of stress cracks over time, being that your lenses were probably dirty now that they're cleaned you're noticing the scratches. The Crusty layer on the lens is pretty thick so it hides all kinds of things until you clean them. But depending on where you park your vehicle and if you do a lot of driving the sun and the little grits in the ground on the asphalt will cause scratches and slight hairline cracks in the plastic lenses. Thank you once again for checking out the video we really appreciate you stay safe stay blessed see you on the next one🏁🚙👍
@teamvance7769
@teamvance7769 2 года назад
Thanks, really appreciate your tutorial. Your lesson was spot on.
@gregbenitez
@gregbenitez Год назад
Hey buddy how's it going and thank you for checking out the video. Absolutely my pleasure, hope the lenses came out fantastic. Stay safe and blessed see you on the next one 👍 🏁🚙
@3dxfx
@3dxfx 2 года назад
5 people stopped to ask me to if i can do their headlights while i was doing mine. this isnt rocket science and i know everyone can watch youtube
@gregbenitez
@gregbenitez 2 года назад
Hey buddy thank you so much for checking out the video. I hope they turned out fantastic keep me posted if you can how your headlights turned out. But yes isn't that pretty wild how people approach you while doing your headlights as you saw on the video the same thing happened to me LOL. So I'm glad everything worked out well you had five people checking you out so they can see the results are pretty amazing for simple little product. Once again thank you so much for checking out the video I appreciate your support if you have any questions please let me know don't hesitate to ask stay safe stay blessed see you on the next one🚙🏁💯👍
@Yahsprincess
@Yahsprincess 2 года назад
Nice!
@MrStevecrasher
@MrStevecrasher 2 года назад
I have used the Mequires kit but the buffer was too slow so I used a foam mop on a polishing machine BUT you have to be careful about heat buildup. I don’t know where outside Europe it applies but a few days ago I read a VW Technical Product Information notice which states that if you re-polish a cars faded headlights, this invalidates the cars certificate of conformity or type approval as it is often known; I have no idea why restoring a cars headlights back to near new condition is technically illegal, it didn’t explain why.
@gregbenitez
@gregbenitez 2 года назад
Hey buddy how's it going hope all is well and thank you for checking out the video. And that is correct those bigger polishing machines have higher RPMs and can burn through the headlights plastic. But I use the small buffers that go onto a drill bit I get them from Amazon I use the orange ones there small compact and they fit perfectly to do various Automotive headlights with no problem at all. I will put the link at the end of this message from amazon. And that is very crazy that Volkswagen will not approve headlight restoration knowing that the plastic will fade over time due to the air quality and pollutions from Earth. To me that sounds like a money maker they want you to bring your vehicle back to the dealer to do every little thing to make money off of us. 50% of the stuff we can do at home but it's always a money game. I just want to say thank you again for checking out the video any questions please do not hesitate to ask I'm always here to help. And below is the Amazon link for the drill bit buffing pads. Stay blessed stay safe see you on the next one. Check this out on Amazon Benavvy 39pcs Drill Polishing Pad Kit, 2 in 1 Car Foam Drill, 7pcs 5" & 31pcs 3" Buffing Pads Compound Automotive Polisher for Drill a.co/d/4GE4suZ
@lanemimnaugh7486
@lanemimnaugh7486 2 года назад
Thanks a lot man for the video. I appreciate it, you're awesome bro.
@gregbenitez
@gregbenitez 2 года назад
Hey buddy how's it going and thank you so much for checking out the video. Absolutely my pleasure I'm glad to do it I'm glad to help out others and keep me posted how they turned out and thank you once again and I appreciate your support. Stay safe stay blessed see you on the next one🚙🏁🚙🏁👍
@lanemimnaugh7486
@lanemimnaugh7486 2 года назад
@@gregbenitez 👍
@johnnymata523
@johnnymata523 2 года назад
Can I lay the top soil few days before the sod ?? I’m doing by my self so can only do so much around my schedule. Thanks in advance.
@gregbenitez
@gregbenitez 2 года назад
Hey buddy how's it going and thank you for checking out the video. Sooooo Yes most definitely you can put the topsoil down on your schedule just keep an eye on the weather forecast for torrential downpours you don't want the topsoil to wash away. And your timing of your pallets of sod, you got 24 hours from when the farm cuts the material and puts it on the pallet before decomposing starts. It gets really hot in between the sod stacked on top of each other and could damage the roots so if you have to water it gently if you can't lay it down on the same day of the delivery. Once again thank you for taking out the video and if you have any further questions please don't hesitate to ask I'm here to help. 👍🌱👍🌱👍🌱👍
@johnnymata523
@johnnymata523 2 года назад
@@gregbenitez thanks for the reply great info.
@anthonylombardo9949
@anthonylombardo9949 2 года назад
I have a 2005 Toyota rav 4 I love the way this came out I did my headlights but I might need a buffer for mine their clear but show a bit of foggy
@gregbenitez
@gregbenitez 2 года назад
Hey Anthony how's it going and thank you so much for checking out the video. Glad the headlights are much clearer than before but with a small drill bit buffer you can purchase these on Amazon it will give you a better higher RPM to really get that fogginess out of the lens. Thanks again for checking out the video I appreciate your support and if you like keep me posted when you do them again. Stay safe stay blessed and see you on the next one.👍🏁🚙
@carlbridgeforth3651
@carlbridgeforth3651 2 года назад
I can't find any attachments that fit mine.i guess Husqvarna don't want stuff to be used the shat different size.
@gregbenitez
@gregbenitez 2 года назад
Hey buddy how's it going hope all is well and oh no sorry to hear about that, I know small equipment technology has came a long way so there's a lot of different new products out there. If you haven't done so check Home Depot and Lowe's I know they have various attachments for various equipment not sure if they would fit but it's worth a try. And good luck buddy keep me posted. 👍🌱
@chinov9445
@chinov9445 2 года назад
What’s up bro How’s the system holding up on the fence between the EZ flow or regular French drain burrito wrap this EZ system is a little less work 🤷🏽‍♂️✅
@gregbenitez
@gregbenitez 2 года назад
Hey buddy how's it going I think it's so much for checking out the video. The system is holding up very well. The EZ flow so far has been absolutely fantastic and all the projects that I've had done. Really easy to install. Thanks again for checking out the video any questions please don't hesitate to ask.👍🌱🌧
@chinov9445
@chinov9445 2 года назад
@@gregbenitez cool brotha thanks forcthe quick response i know the video is seven years old that's awesome news thinking of doing this to my backyard 😁💯🤙🏽
@gregbenitez
@gregbenitez 2 года назад
@@chinov9445 Yeah buddy and I believe the NDS products have a 50 year warranty. And so far so good. I keep in touch with the people I installed the systems and they say everything is great 👍 and I'm like okay cool deal sounds good 👍 🌱 😎
@claudio-1896
@claudio-1896 2 года назад
Gracias Benitez, great videos, great info!
@gregbenitez
@gregbenitez 2 года назад
Absolutely my pleasure. And thank you so much for checking out the video any questions please don't hesitate to ask thank you have a safe and blessed day👍🌱